From mboxrd@z Thu Jan 1 00:00:00 1970 From: jian.hu@amlogic.com (Jian Hu) Date: Thu, 29 Nov 2018 20:18:03 +0800 Subject: [PATCH 2/2] i2c: meson: add support for Meson G12A SoC I2C controller In-Reply-To: <865b607c-8419-9c9e-0a00-018e87adf8de@baylibre.com> References: <1543489197-183181-1-git-send-email-jian.hu@amlogic.com> <1543489197-183181-3-git-send-email-jian.hu@amlogic.com> <865b607c-8419-9c9e-0a00-018e87adf8de@baylibre.com> Message-ID: To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Hi Neil, On 2018/11/29 19:26, Neil Armstrong wrote: > On 29/11/2018 11:59, Jian Hu wrote: >> Add compatible and data for G12A I2C controller. >> >> Signed-off-by: Jian Hu >> --- >> drivers/i2c/busses/i2c-meson.c | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c >> index 90f5d04..b86eed7 100644 >> --- a/drivers/i2c/busses/i2c-meson.c >> +++ b/drivers/i2c/busses/i2c-meson.c >> @@ -462,10 +462,15 @@ static int meson_i2c_remove(struct platform_device *pdev) >> .div_factor = 3, >> }; >> >> +static const struct meson_i2c_data i2c_g12a_data = { >> + .div_factor = 3, > > Especially if the div_factor is the same as AXG. > > If you have some other fixes for G12a in the pipe, you will add the new compatible and meson_i2c_data later, > for the div_factor, simply use the axg struct and compatible. > > Neil > For axg and g12a SoC, the div_factor is the same, and I have confirmed that they share the same IP. I prefer g12a uses axg's compatible and data if it is reasonable. I will just submit the i2c controller node in meson-g12a.dtsi. >> +}; >> + >> static const struct of_device_id meson_i2c_match[] = { >> { .compatible = "amlogic,meson6-i2c", .data = &i2c_meson6_data }, >> { .compatible = "amlogic,meson-gxbb-i2c", .data = &i2c_gxbb_data }, >> { .compatible = "amlogic,meson-axg-i2c", .data = &i2c_axg_data }, >> + { .compatible = "amlogic,meson-g12a-i2c", .data = &i2c_g12a_data }, >> {}, >> }; >> >> > > . >