From mboxrd@z Thu Jan 1 00:00:00 1970 From: yixun.lan@amlogic.com (Yixun Lan) Date: Mon, 6 Nov 2017 17:31:56 +0800 Subject: [PATCH] clk: meson: gxbb: fix wrong clock for SARADC/SANA In-Reply-To: <889b8fd5-31e4-1371-6121-0f1aec6fa777@baylibre.com> References: <20171106075212.14275-1-yixun.lan@amlogic.com> <889b8fd5-31e4-1371-6121-0f1aec6fa777@baylibre.com> Message-ID: To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Hi Neil: On 11/06/17 16:57, Neil Armstrong wrote: > On 06/11/2017 08:52, Yixun Lan wrote: >> According to the datasheet, in Meson-GXBB/GXL series, >> The clock gate bit for SARADC is HHI_GCLK_MPEG2 bit[22], >> while clock gate bit for SANA is HHI_GCLK_MPEG0 bit[10]. >> >> Test passed at gxl_skt dev board. >> >> Tested-by: Xingyu Chen >> Signed-off-by: Yixun Lan >> >> --- >> I think this error was introduced by a copy & paste from meson8 code? >> and we didn't notice them due to the SANA clock is also enabled by >> DTS (so SAR_ADC works fine)? >> --- >> drivers/clk/meson/gxbb.c | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c >> index b2d1e8ed7152..92168348ffa6 100644 >> --- a/drivers/clk/meson/gxbb.c >> +++ b/drivers/clk/meson/gxbb.c >> @@ -1139,7 +1139,7 @@ static MESON_GATE(gxbb_pl301, HHI_GCLK_MPEG0, 6); >> static MESON_GATE(gxbb_periphs, HHI_GCLK_MPEG0, 7); >> static MESON_GATE(gxbb_spicc, HHI_GCLK_MPEG0, 8); >> static MESON_GATE(gxbb_i2c, HHI_GCLK_MPEG0, 9); >> -static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG0, 10); >> +static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG0, 10); >> static MESON_GATE(gxbb_smart_card, HHI_GCLK_MPEG0, 11); >> static MESON_GATE(gxbb_rng0, HHI_GCLK_MPEG0, 12); >> static MESON_GATE(gxbb_uart0, HHI_GCLK_MPEG0, 13); >> @@ -1190,7 +1190,7 @@ static MESON_GATE(gxbb_usb0_ddr_bridge, HHI_GCLK_MPEG2, 9); >> static MESON_GATE(gxbb_mmc_pclk, HHI_GCLK_MPEG2, 11); >> static MESON_GATE(gxbb_dvin, HHI_GCLK_MPEG2, 12); >> static MESON_GATE(gxbb_uart2, HHI_GCLK_MPEG2, 15); >> -static MESON_GATE(gxbb_sana, HHI_GCLK_MPEG2, 22); >> +static MESON_GATE(gxbb_sar_adc, HHI_GCLK_MPEG2, 22); >> static MESON_GATE(gxbb_vpu_intr, HHI_GCLK_MPEG2, 25); >> static MESON_GATE(gxbb_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26); >> static MESON_GATE(gxbb_clk81_a53, HHI_GCLK_MPEG2, 29); >> > > Hi Yixun, > > Can you precise how it affects the saradc driver ? from the DT and clk PoV ? > the saradc module doesn't require sana clock (it's irrelvevant), we will send a patchset v3 to address this. > Also, can you add a Fixes: tag on the patch ? > sure, I can do this. > Thanks, > Neil > > . >