From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 1/3] ARM: meson: Add regmap support for clock driver
Date: Wed, 21 Nov 2018 10:43:12 +0100 [thread overview]
Message-ID: <d3499bb1-9b04-93e2-f389-35e381bdb2e2@baylibre.com> (raw)
In-Reply-To: <20181120235020.14812-2-ldevulder@suse.de>
Hi Loic,
On 21/11/2018 00:50, Loic Devulder wrote:
> This patch modifies the meson clock driver to use syscon/regmap like
> the Linux kernel does, as it is needed if we want to share the same
> DTS files.
>
> Signed-off-by: Loic Devulder <ldevulder@suse.de>
> ---
> drivers/clk/clk_meson.c | 59 +++++++++++++++++++++++++------------------------
> 1 file changed, 30 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/clk/clk_meson.c b/drivers/clk/clk_meson.c
> index 978f646284..f477a4c510 100644
> --- a/drivers/clk/clk_meson.c
> +++ b/drivers/clk/clk_meson.c
> @@ -11,6 +11,8 @@
> #include <clk-uclass.h>
> #include <div64.h>
> #include <dm.h>
> +#include <regmap.h>
> +#include <syscon.h>
> #include <dt-bindings/clock/gxbb-clkc.h>
> #include "clk_meson.h"
>
> @@ -65,7 +67,7 @@
> #define XTAL_RATE 24000000
>
> struct meson_clk {
> - void __iomem *addr;
> + struct regmap *map;
> };
>
> static ulong meson_div_get_rate(struct clk *clk, unsigned long id);
> @@ -217,8 +219,8 @@ static int meson_set_gate_by_id(struct clk *clk, unsigned long id, bool on)
>
> debug("%s: really %sabling %ld\n", __func__, on ? "en" : "dis", id);
>
> - clrsetbits_le32(priv->addr + gate->reg,
> - BIT(gate->bit), on ? BIT(gate->bit) : 0);
> + regmap_update_bits(priv->map, gate->reg,
> + BIT(gate->bit), on ? BIT(gate->bit) : 0);
>
> /* Propagate to next gate(s) */
> switch (id) {
> @@ -269,7 +271,7 @@ static ulong meson_div_get_rate(struct clk *clk, unsigned long id)
> unsigned int rate, parent_rate;
> struct parm *parm;
> int parent;
> - u32 reg;
> + uint reg;
>
> switch (id) {
> case CLKID_VPU_0_DIV:
> @@ -292,7 +294,7 @@ static ulong meson_div_get_rate(struct clk *clk, unsigned long id)
> return -ENOENT;
> }
>
> - reg = readl(priv->addr + parm->reg_off);
> + regmap_read(priv->map, parm->reg_off, ®);
> reg = PARM_GET(parm->width, parm->shift, reg);
>
> debug("%s: div of %ld is %d\n", __func__, id, reg + 1);
> @@ -318,7 +320,6 @@ static ulong meson_div_set_rate(struct clk *clk, unsigned long id, ulong rate,
> unsigned long parent_rate;
> struct parm *parm;
> int parent;
> - u32 reg;
> int ret;
>
> if (current_rate == rate)
> @@ -383,9 +384,8 @@ static ulong meson_div_set_rate(struct clk *clk, unsigned long id, ulong rate,
>
> debug("%s: setting div of %ld to %d\n", __func__, id, new_div);
>
> - reg = readl(priv->addr + parm->reg_off);
> - writel(PARM_SET(parm->width, parm->shift, reg, new_div - 1),
> - priv->addr + parm->reg_off);
> + regmap_update_bits(priv->map, parm->reg_off, SETPMASK(parm->width, parm->shift),
> + (new_div - 1) << parm->shift);
>
> debug("%s: new rate of %ld is %ld\n",
> __func__, id, meson_div_get_rate(clk, id));
> @@ -446,7 +446,7 @@ static ulong meson_mux_get_parent(struct clk *clk, unsigned long id)
> struct meson_clk *priv = dev_get_priv(clk->dev);
> struct parm *parm;
> int *parents;
> - u32 reg;
> + uint reg;
>
> switch (id) {
> case CLKID_VPU:
> @@ -477,7 +477,7 @@ static ulong meson_mux_get_parent(struct clk *clk, unsigned long id)
> return -ENOENT;
> }
>
> - reg = readl(priv->addr + parm->reg_off);
> + regmap_read(priv->map, parm->reg_off, ®);
> reg = PARM_GET(parm->width, parm->shift, reg);
>
> debug("%s: parent of %ld is %d (%d)\n",
> @@ -494,7 +494,6 @@ static ulong meson_mux_set_parent(struct clk *clk, unsigned long id,
> unsigned int new_index = -EINVAL;
> struct parm *parm;
> int *parents;
> - u32 reg;
> int i;
>
> if (IS_ERR_VALUE(cur_parent))
> @@ -546,9 +545,8 @@ static ulong meson_mux_set_parent(struct clk *clk, unsigned long id,
>
> debug("%s: new index of %ld is %d\n", __func__, id, new_index);
>
> - reg = readl(priv->addr + parm->reg_off);
> - writel(PARM_SET(parm->width, parm->shift, reg, new_index),
> - priv->addr + parm->reg_off);
> + regmap_update_bits(priv->map, parm->reg_off, SETPMASK(parm->width, parm->shift),
> + new_index << parm->shift);
>
> debug("%s: new parent of %ld is %ld\n",
> __func__, id, meson_mux_get_parent(clk, id));
> @@ -570,7 +568,7 @@ static unsigned long meson_clk81_get_rate(struct clk *clk)
> {
> struct meson_clk *priv = dev_get_priv(clk->dev);
> unsigned long parent_rate;
> - u32 reg;
> + uint reg;
> int parents[] = {
> -1,
> -1,
> @@ -583,7 +581,7 @@ static unsigned long meson_clk81_get_rate(struct clk *clk)
> };
>
> /* mux */
> - reg = readl(priv->addr + HHI_MPEG_CLK_CNTL);
> + regmap_read(priv->map, HHI_MPEG_CLK_CNTL, ®);
> reg = (reg >> 12) & 7;
>
> switch (reg) {
> @@ -597,7 +595,7 @@ static unsigned long meson_clk81_get_rate(struct clk *clk)
> }
>
> /* divider */
> - reg = readl(priv->addr + HHI_MPEG_CLK_CNTL);
> + regmap_read(priv->map, HHI_MPEG_CLK_CNTL, ®);
> reg = reg & ((1 << 7) - 1);
>
> /* clk81 divider is zero based */
> @@ -640,8 +638,9 @@ static ulong meson_mpll_get_rate(struct clk *clk, unsigned long id)
> {
> struct meson_clk *priv = dev_get_priv(clk->dev);
> struct parm *psdm, *pn2;
> - unsigned long reg, sdm, n2;
> + unsigned long sdm, n2;
> unsigned long parent_rate;
> + uint reg;
>
> switch (id) {
> case CLKID_MPLL0:
> @@ -664,10 +663,10 @@ static ulong meson_mpll_get_rate(struct clk *clk, unsigned long id)
> if (IS_ERR_VALUE(parent_rate))
> return parent_rate;
>
> - reg = readl(priv->addr + psdm->reg_off);
> + regmap_read(priv->map, psdm->reg_off, ®);
> sdm = PARM_GET(psdm->width, psdm->shift, reg);
>
> - reg = readl(priv->addr + pn2->reg_off);
> + regmap_read(priv->map, pn2->reg_off, ®);
> n2 = PARM_GET(pn2->width, pn2->shift, reg);
>
> return mpll_rate_from_params(parent_rate, sdm, n2);
> @@ -691,7 +690,7 @@ static ulong meson_pll_get_rate(struct clk *clk, unsigned long id)
> struct parm *pm, *pn, *pod;
> unsigned long parent_rate_mhz = XTAL_RATE / 1000000;
> u16 n, m, od;
> - u32 reg;
> + uint reg;
>
> switch (id) {
> case CLKID_FIXED_PLL:
> @@ -708,13 +707,13 @@ static ulong meson_pll_get_rate(struct clk *clk, unsigned long id)
> return -ENOENT;
> }
>
> - reg = readl(priv->addr + pn->reg_off);
> + regmap_read(priv->map, pn->reg_off, ®);
> n = PARM_GET(pn->width, pn->shift, reg);
>
> - reg = readl(priv->addr + pm->reg_off);
> + regmap_read(priv->map, pm->reg_off, ®);
> m = PARM_GET(pm->width, pm->shift, reg);
>
> - reg = readl(priv->addr + pod->reg_off);
> + regmap_read(priv->map, pod->reg_off, ®);
> od = PARM_GET(pod->width, pod->shift, reg);
>
> return ((parent_rate_mhz * m / n) >> od) * 1000000;
> @@ -876,8 +876,8 @@ static ulong meson_clk_set_rate(struct clk *clk, ulong rate)
> if (IS_ERR_VALUE(ret))
> return ret;
>
> - printf("clock %lu has new rate %lu\n", clk->id,
> - meson_clk_get_rate_by_id(clk, clk->id));
> + debug("clock %lu has new rate %lu\n", clk->id,
> + meson_clk_get_rate_by_id(clk, clk->id));
>
> return 0;
> }
> @@ -885,9 +884,11 @@ static int meson_clk_probe(struct udevice *dev)
> {
> struct meson_clk *priv = dev_get_priv(dev);
>
> - priv->addr = dev_read_addr_ptr(dev);
> + priv->map = syscon_node_to_regmap(dev_get_parent(dev)->node);
> + if (IS_ERR(priv->map))
> + return PTR_ERR(priv->map);
>
> - debug("meson-clk: probed at addr %p\n", priv->addr);
> + debug("meson-clk: probed\n");
>
> return 0;
> }
>
Thanks for doing the conversion,
Since this depends on the updated DT, I'll squash it with the last DT update patch, otherwise you'll have a breakage between these 2 commits if we try to bisect an issue.
Same for patch 2, you should add the SYSCON dependency directly on the MESON64_COMMON config in arch/arm/mach-meson/Kconfig
Otherwise, for this change squashed with the DT sync and SYSCON moved to MESON64_COMMON:
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Neil
next prev parent reply other threads:[~2018-11-21 9:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-20 23:50 [PATCH v2 0/3] ARM: meson: Use syscon/regmap " Loic Devulder
2018-11-20 23:50 ` [PATCH v2 1/3] ARM: meson: Add regmap support " Loic Devulder
2018-11-21 9:43 ` Neil Armstrong [this message]
2018-11-20 23:50 ` [PATCH v2 2/3] ARM: meson: Enable syscon on all supported boards Loic Devulder
2018-11-21 9:44 ` Neil Armstrong
2018-11-20 23:50 ` [PATCH v2 3/3] ARM: dts: meson: Update dts files from Linux v4.19 Loic Devulder
2018-11-21 9:43 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d3499bb1-9b04-93e2-f389-35e381bdb2e2@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®