mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-media@vger.kernel.org
Subject: Re: [PATCH v3 0/4] media: meson: Add support for the Amlogic GE2D Accelerator Unit
Date: Wed, 2 Dec 2020 13:40:08 +0100	[thread overview]
Message-ID: <d6fead58-d5d7-09f3-cea9-90f56709cc23@baylibre.com> (raw)
In-Reply-To: <f0ab5ae9-db4d-4c9d-811d-26a6ce4c50f7@xs4all.nl>

Hi,

On 02/12/2020 13:27, Hans Verkuil wrote:
> On 17/11/2020 09:44, Neil Armstrong wrote:
>> The GE2D is a 2D accelerator with various features like configurable blitter
>> with alpha blending, frame rotation, scaling, format conversion and colorspace
>> conversion.
>>
>> The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
>> - 0, 90, 180, 270deg rotation
>> - horizontal/vertical flipping
>> - source cropping
>> - destination compositing
>> - 32bit/24bit/16bit format conversion
>>
>> This adds the support for the GE2D version found in the AXG SoCs Family.
>>
>> The missing features are:
>> - Source scaling
>> - Colorspace conversion
>> - Advanced alpha blending & blitting options
>>
>> Dependencies:
>> - Patches 1-3: None
>> - Patch 4: https://lkml.kernel.org/r/20200915124553.8056-1-narmstrong@baylibre.com (applied for 5.11)
>>
>> Changes since v2:
>> - removed error check in and after get_frame()
>> - moved the v4l2_file_operations lower in the code to avoid adding vidioc_setup_cap_fmt on top
>> - removed all memcpy of pix_fmt
>> - simplified & fixed ge2d_start_streaming
>> - added local buffer type check in vidioc_g_selection instead of using get_frame error
>> - removed impossible <0 rectangle check, fixed error string
>> - added comment on condition after V4L2_CID_ROTATE
>>
>> Changes since v1:
>> - Rebased on v5.10-rc1
>>
>> / # v4l2-compliance -s
>> v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t
> 
> That's too old: additional checks for CSC handling have been added since
> that time. It probably won't affect this driver, but still I prefer it if you
> can update to the latest version and verify that it still passes all the tests.

Ok

Neil

> 
> Regards,
> 
> 	Hans
> 
>>
>> Compliance test for meson-ge2d device /dev/video0:
>>
>> Driver Info:
>> 	Driver name      : meson-ge2d
>> 	Card type        : meson-ge2d
>> 	Bus info         : platform:meson-ge2d
>> 	Driver version   : 5.9.0
>> 	Capabilities     : 0x84208000
>> 		Video Memory-to-Memory
>> 		Streaming
>> 		Extended Pix Format
>> 		Device Capabilities
>> 	Device Caps      : 0x04208000
>> 		Video Memory-to-Memory
>> 		Streaming
>> 		Extended Pix Format
>>
>> Required ioctls:
>> 	test VIDIOC_QUERYCAP: OK
>>
>> Allow for multiple opens:
>> 	test second /dev/video0 open: OK
>> 	test VIDIOC_QUERYCAP: OK
>> 	test VIDIOC_G/S_PRIORITY: OK
>> 	test for unlimited opens: OK
>>
>> 	test invalid ioctls: OK
>> Debug ioctls:
>> 	test VIDIOC_DBG_G/S_REGISTER: OK
>> 	test VIDIOC_LOG_STATUS: OK (Not Supported)
>>
>> Input ioctls:
>> 	test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>> 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>> 	test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>> 	test VIDIOC_ENUMAUDIO: OK (Not Supported)
>> 	test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
>> 	test VIDIOC_G/S_AUDIO: OK (Not Supported)
>> 	Inputs: 0 Audio Inputs: 0 Tuners: 0
>>
>> Output ioctls:
>> 	test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>> 	test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>> 	test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>> 	test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>> 	test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>> 	Outputs: 0 Audio Outputs: 0 Modulators: 0
>>
>> Input/Output configuration ioctls:
>> 	test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>> 	test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
>> 	test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
>> 	test VIDIOC_G/S_EDID: OK (Not Supported)
>>
>> Control ioctls:
>> 	test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>> 	test VIDIOC_QUERYCTRL: OK
>> 	test VIDIOC_G/S_CTRL: OK
>> 	test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>> 	test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>> 	test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>> 	Standard Controls: 4 Private Controls: 0
>>
>> Format ioctls:
>> 	test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>> 	test VIDIOC_G/S_PARM: OK (Not Supported)
>> 	test VIDIOC_G_FBUF: OK (Not Supported)
>> 	test VIDIOC_G_FMT: OK
>> 	test VIDIOC_TRY_FMT: OK
>> 	test VIDIOC_S_FMT: OK
>> 	test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>> 	test Cropping: OK
>> 	test Composing: OK
>> 	test Scaling: OK (Not Supported)
>>
>> Codec ioctls:
>> 	test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>> 	test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>> 	test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>
>> Buffer ioctls:
>> 	test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>> 	test VIDIOC_EXPBUF: OK
>> 	test Requests: OK (Not Supported)
>>
>> Test input 0:
>>
>> Streaming ioctls:
>> 	test read/write: OK (Not Supported)
>> 	test blocking wait: OK
>> 	Video Capture: Captured 58 buffers                
>> 	test MMAP (no poll): OK
>> 	Video Capture: Captured 58 buffers                
>> 	test MMAP (select): OK
>> 	Video Capture: Captured 58 buffers                
>> 	test MMAP (epoll): OK
>> 	test USERPTR (no poll): OK (Not Supported)
>> 	test USERPTR (select): OK (Not Supported)
>> 	test DMABUF: Cannot test, specify --expbuf-device
>>
>> Total for meson-ge2d device /dev/video0: 52, Succeeded: 52, Failed: 0, Warnings: 0
>>
>> Neil Armstrong (4):
>>   dt-bindings: media: Add bindings for the Amlogic GE2D Accelerator Unit
>>   media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit
>>   MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver
>>   arm64: dts: meson-axg: add GE2D node
>>
>>  .../bindings/media/amlogic,axg-ge2d.yaml      |   47 +
>>  MAINTAINERS                                   |    9 +
>>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi    |    9 +
>>  drivers/media/platform/Kconfig                |   13 +
>>  drivers/media/platform/Makefile               |    2 +
>>  drivers/media/platform/meson/ge2d/Makefile    |    3 +
>>  drivers/media/platform/meson/ge2d/ge2d-regs.h |  360 ++++++
>>  drivers/media/platform/meson/ge2d/ge2d.c      | 1091 +++++++++++++++++
>>  8 files changed, 1534 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/media/amlogic,axg-ge2d.yaml
>>  create mode 100644 drivers/media/platform/meson/ge2d/Makefile
>>  create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
>>  create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c
>>
> 


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  reply	other threads:[~2020-12-02 12:40 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-17  8:44 Neil Armstrong
2020-11-17  8:44 ` [PATCH v3 1/4] dt-bindings: media: Add bindings " Neil Armstrong
2020-11-17  8:44 ` [PATCH v3 2/4] media: meson: Add M2M driver " Neil Armstrong
2020-12-02 12:40   ` Hans Verkuil
2020-12-02 14:56     ` Neil Armstrong
2020-12-02 15:14       ` Hans Verkuil
2020-11-17  8:44 ` [PATCH v3 3/4] MAINTAINERS: Add myself as maintainer of the Amlogic GE2D driver Neil Armstrong
2020-11-17  8:44 ` [PATCH v3 4/4] arm64: dts: meson-axg: add GE2D node Neil Armstrong
2020-12-02 12:27 ` [PATCH v3 0/4] media: meson: Add support for the Amlogic GE2D Accelerator Unit Hans Verkuil
2020-12-02 12:40   ` Neil Armstrong [this message]
2020-12-08 16:54 ` Nicolas Dufresne
2020-12-08 17:22   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d6fead58-d5d7-09f3-cea9-90f56709cc23@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®