From: Manuel Ebner <manuelebner@mailbox.org>
To: Valerio Setti <vsetti@baylibre.com>
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
linux-kernel@vger.kernel.org,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Liam Girdwood <lgirdwood@gmail.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Takashi Iwai <tiwai@suse.com>,
linux-sound@vger.kernel.org, Jaroslav Kysela <perex@perex.cz>,
Mark Brown <broonie@kernel.org>,
linux-amlogic@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: Re: [PATCH] ASoC: meson: aiu-fifo: prevent sleeping when spinlock is held
Date: Wed, 18 Nov 2026 15:56:32 +0100 [thread overview]
Message-ID: <d825fa6717dc907247cbaec6c7555eccb5676b9b.camel@mailbox.org> (raw)
In-Reply-To: <34e02f23-1ace-4a13-9353-b73a1464a592@baylibre.com>
On Mon, 2026-11-16 at 17:41 +0100, Valerio Setti wrote:
> Hi Manuel
>
> > I have read your patch and have a question.
> [...]
Ack.
> > > @@ -48,14 +49,22 @@ static int aiu_fifo_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
> > > struct snd_soc_dai *dai)
> > > {
> > > struct snd_soc_component *component = dai->component;
> > > + unsigned int val;
> >
> > Here is val.
> >
> > > + int ret;
> > >
> > > switch (cmd) {
> > > case SNDRV_PCM_TRIGGER_START:
> > > case SNDRV_PCM_TRIGGER_RESUME:
> > > case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
> > > - snd_soc_component_write(component, AIU_RST_SOFT,
> > > - AIU_RST_SOFT_I2S_FAST);
> > > - snd_soc_component_read(component, AIU_I2S_SYNC);
> > > + ret = regmap_write(component->regmap, AIU_RST_SOFT, AIU_RST_SOFT_I2S_FAST);
> > > + if (ret < 0)
> > > + return snd_soc_ret(component->dev, ret,
> > > + "Failed to write register on trigger");
> > > +
> > > + ret = regmap_read(component->regmap, AIU_I2S_SYNC, &val);
> >
> > So as I understand val/&val is just there to listen and forget what gets returned.
> > That's kinda weird, but not an issue.
>
> Well, I understand that it might be weird from a software point of view,
> but it makes sense from the hardware one. According to the manual:
>
> A read from this register indicates that the next sample to be
> sent out of the interface should go into the left channel of
> the dac.
> > > @@ -37,8 +38,11 @@ snd_pcm_uframes_t aiu_fifo_pointer(struct snd_soc_component *component,
> > > struct aiu_fifo *fifo = snd_soc_dai_dma_data_get_playback(dai);
> > > struct snd_pcm_runtime *runtime = substream->runtime;
> > > unsigned int addr;
> >
> > Here it's addr. It's not yours, you just kept it.
> >
> > > + int ret;
> > >
> > > - addr = snd_soc_component_read(component, fifo->mem_offset + AIU_MEM_RD);
> > > + ret = regmap_read(component->regmap, fifo->mem_offset + AIU_MEM_RD, &addr);
> >
> > Similar as above. But why is addr here and val above? I think it's the same role in regmap_read().
> > Would it make sense to name both the same? If it does, I'm in favor of val, because that's in the
> > kernel-doc of regmap_read().
> >
> > > + if (ret < 0)
> > > + return snd_soc_ret(component->dev, ret, "Failed to read FIFO pointer");
> > >
> > > return bytes_to_frames(runtime, addr - (unsigned int)runtime->dma_addr);
> > Here addr is used, so it's not same as above.
> >
> > Looking forward to your POV.
>
> Here I left 'addr' to minimize the number of changes in the patch.
> Looking at it again now, I'm more in favor of keeping it as 'addr'. I
> understand that the regmap documentation uses 'val', but in this case we
> know that the returned value is really an address of memory, not just a
> generic value.
> Also keeping the name as it is makes the last line of that function
> reading smoothly.
>
> However if you deem this unacceptable I can change as you requested.
> Just let me know.
I'm good with 'addr', thanks for the explanation.
Manuel
>
> Best regards,
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
prev parent reply other threads:[~2026-11-18 14:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-11 10:09 Valerio Setti
2026-11-12 23:05 ` Martin Blumenstingl
2026-11-13 12:47 ` Valerio Setti
2026-11-13 14:54 ` Manuel Ebner
2026-11-13 15:09 ` Mark Brown
2026-11-16 16:41 ` Valerio Setti
2026-11-18 14:56 ` Manuel Ebner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d825fa6717dc907247cbaec6c7555eccb5676b9b.camel@mailbox.org \
--to=manuelebner@mailbox.org \
--cc=broonie@kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=lgirdwood@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=martin.blumenstingl@googlemail.com \
--cc=neil.armstrong@linaro.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
--cc=vsetti@baylibre.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®