From mboxrd@z Thu Jan 1 00:00:00 1970 From: hkallweit1@gmail.com (Heiner Kallweit) Date: Wed, 15 Mar 2017 20:33:43 +0100 Subject: [PATCH 1/5] mmc: meson-gx: switch irq name to DT node name In-Reply-To: References: Message-ID: To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org So far it wasn't easy to check which interrupt belongs to which SD/eMMC port (e.g. in /proc/interrupts) because the driver name was used as description for all ports. Change this to the default which is the device name (DT node name). Signed-off-by: Heiner Kallweit --- drivers/mmc/host/meson-gx-mmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c index 62597638..f2d4486a 100644 --- a/drivers/mmc/host/meson-gx-mmc.c +++ b/drivers/mmc/host/meson-gx-mmc.c @@ -758,7 +758,7 @@ static int meson_mmc_probe(struct platform_device *pdev) ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq, meson_mmc_irq_thread, IRQF_SHARED, - DRIVER_NAME, host); + NULL, host); if (ret) goto err_div_clk; -- 2.12.0