From mboxrd@z Thu Jan 1 00:00:00 1970 From: narmstrong@baylibre.com (Neil Armstrong) Date: Mon, 12 Jun 2017 09:38:55 +0200 Subject: [PATCH] ARM: dts: meson8: fix the IR receiver pins In-Reply-To: <20170609222039.25191-1-martin.blumenstingl@googlemail.com> References: <20170609222039.25191-1-martin.blumenstingl@googlemail.com> Message-ID: To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org On 06/10/2017 12:20 AM, Martin Blumenstingl wrote: > The IR receiver pins are currently defined in the CBUS pin-controller. > However the pins are in the AO region, which is controlled by the AOBUS > pin-controller. Move the pins to pinctrl_aobus so they can actually be > used. > > Fixes: b60e1157d8fa ("ARM: dts: amlogic: Split pinctrl device for Meson8 / Meson8b") > Signed-off-by: Martin Blumenstingl > --- > arch/arm/boot/dts/meson8.dtsi | 14 +++++++------- > 1 file changed, 7 insertions(+), 7 deletions(-) > > diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi > index 9b0b3ddbb17e..e4f7357b4b31 100644 > --- a/arch/arm/boot/dts/meson8.dtsi > +++ b/arch/arm/boot/dts/meson8.dtsi > @@ -116,6 +116,13 @@ > function = "i2c_mst_ao"; > }; > }; > + > + ir_recv_pins: remote { > + mux { > + groups = "remote_input"; > + function = "remote"; > + }; > + }; > }; > }; > > @@ -151,13 +158,6 @@ > }; > }; > > - ir_recv_pins: remote { > - mux { > - groups = "remote_input"; > - function = "remote"; > - }; > - }; > - > eth_pins: ethernet { > mux { > groups = "eth_tx_clk_50m", "eth_tx_en", > Reviewed-by: Neil Armstrong