[PATCH] drm/bridge: dw_hdmi: add cec notifier support

[Jose.Abreu@synopsys.com (Jose Abreu)]

Hi Neil,


On 06-07-2017 11:33, Neil Armstrong wrote:
> From: Russell King <rmk+kernel@armlinux.org.uk>
>
> Add CEC notifier support to the HDMI bridge driver, so that the CEC
> part of the IP can receive its physical address.
>
> Tested-by: Neil Armstrong <narmstrong@baylibre.com>
> Acked-by: Neil Armstrong <narmstrong@baylibre.com>
> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
>
> Hi Archit, Hans,
>
> This is repost of Russell's patch from his dw-hdmi CEC patchset.
>
> Since his CEC implementation will be integrated in the bridge driver,
> this notifier patch won't be re-posted.
>
> But the Amlogic Platform needs a notifier since it uses a standalone CEC
> controller.
>
> Thanks,
> Neil
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index ead1124..9c03846 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -33,6 +33,8 @@
>  #include <uapi/linux/media-bus-format.h>
>  #include <uapi/linux/videodev2.h>
>  
> +#include <media/cec-notifier.h>

Don't you also have to "select CEC_NOTIFIER" in Kconfig? Or is it
not needed anymore with the recent Kconfig changes of CEC?

Best regards,
Jose Miguel Abreu

> +
>  #include "dw-hdmi.h"
>  #include "dw-hdmi-audio.h"
>  
> @@ -175,6 +177,8 @@ struct dw_hdmi {
>  	struct regmap *regm;
>  	void (*enable_audio)(struct dw_hdmi *hdmi);
>  	void (*disable_audio)(struct dw_hdmi *hdmi);
> +
> +	struct cec_notifier *cec_notifier;
>  };
>  
>  #define HDMI_IH_PHY_STAT0_RX_SENSE \
> @@ -1896,6 +1900,7 @@ static int dw_hdmi_connector_get_modes(struct drm_connector *connector)
>  		hdmi->sink_is_hdmi = drm_detect_hdmi_monitor(edid);
>  		hdmi->sink_has_audio = drm_detect_monitor_audio(edid);
>  		drm_mode_connector_update_edid_property(connector, edid);
> +		cec_notifier_set_phys_addr_from_edid(hdmi->cec_notifier, edid);
>  		ret = drm_add_edid_modes(connector, edid);
>  		/* Store the ELD */
>  		drm_edid_to_eld(connector, edid);
> @@ -2077,6 +2082,10 @@ void __dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense)
>  		dw_hdmi_update_phy_mask(hdmi);
>  	}
>  	mutex_unlock(&hdmi->mutex);
> +
> +	if (!rx_sense && !hpd)
> +		cec_notifier_set_phys_addr(hdmi->cec_notifier,
> +					   CEC_PHYS_ADDR_INVALID);
>  }
>  
>  void dw_hdmi_setup_rx_sense(struct device *dev, bool hpd, bool rx_sense)
> @@ -2376,6 +2385,12 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
>  	if (ret)
>  		goto err_iahb;
>  
> +	hdmi->cec_notifier = cec_notifier_get(dev);
> +	if (!hdmi->cec_notifier) {
> +		ret = -ENOMEM;
> +		goto err_iahb;
> +	}
> +
>  	/*
>  	 * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
>  	 * N and cts values before enabling phy
> @@ -2452,6 +2467,9 @@ static int dw_hdmi_detect_phy(struct dw_hdmi *hdmi)
>  		hdmi->ddc = NULL;
>  	}
>  
> +	if (hdmi->cec_notifier)
> +		cec_notifier_put(hdmi->cec_notifier);
> +
>  	clk_disable_unprepare(hdmi->iahb_clk);
>  err_isfr:
>  	clk_disable_unprepare(hdmi->isfr_clk);