mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: khilman@baylibre.com (Kevin Hilman)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe
Date: Mon, 27 Feb 2017 19:06:59 -0800	[thread overview]
Message-ID: <m2tw7f10a4.fsf@baylibre.com> (raw)
In-Reply-To: <8419d592-1338-d7eb-3a75-342b64897922@gmail.com> (Heiner Kallweit's message of "Sat, 18 Feb 2017 14:19:32 +0100")

Heiner Kallweit <hkallweit1@gmail.com> writes:

> The condition should be "if (ret)" as the disable/unprepare is
> supposed to be executed if the previous command fails.
> In addition adjust the error path in probe to properly deal
> with the case that cfg_div_clk can be registered successfully
> but enable/prepare fails.
> In this case we shouldn't call clk_disable_unprepare.
>
> Reported-by: Micha? Zegan <webczat_200@poczta.onet.pl>
> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

Acked-by: Kevin Hilman <khilman@baylibre.com>

> ---
> v2:
> - extended commit message
> v3:
> - adjust error path in probe
> ---
>  drivers/mmc/host/meson-gx-mmc.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 68e76fa8..002e4aac 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -321,7 +321,7 @@ static int meson_mmc_clk_init(struct meson_host *host)
>  	host->mmc->f_min = clk_round_rate(host->cfg_div_clk, 400000);
>  
>  	ret = meson_mmc_clk_set(host, host->mmc->f_min);
> -	if (!ret)
> +	if (ret)
>  		clk_disable_unprepare(host->cfg_div_clk);
>  
>  	return ret;
> @@ -771,7 +771,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
>  					meson_mmc_irq_thread, IRQF_SHARED,
>  					DRIVER_NAME, host);
>  	if (ret)
> -		goto free_host;
> +		goto err_div_clk;
>  
>  	mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
>  	mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
> @@ -784,7 +784,7 @@ static int meson_mmc_probe(struct platform_device *pdev)
>  	if (host->bounce_buf == NULL) {
>  		dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
>  		ret = -ENOMEM;
> -		goto free_host;
> +		goto err_div_clk;
>  	}
>  
>  	mmc->ops = &meson_mmc_ops;
> @@ -792,8 +792,9 @@ static int meson_mmc_probe(struct platform_device *pdev)
>  
>  	return 0;
>  
> -free_host:
> +err_div_clk:
>  	clk_disable_unprepare(host->cfg_div_clk);
> +free_host:
>  	clk_disable_unprepare(host->core_clk);
>  	mmc_free_host(mmc);
>  	return ret;

  parent reply	other threads:[~2017-02-28  3:06 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-18 11:50 [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd Heiner Kallweit
2017-02-18 13:06 ` [PATCH v3 2/10] mmc: meson-gx: make two functions return void Heiner Kallweit
2017-02-18 13:07 ` [PATCH v3 3/10] mmc: meson-gx: remove unused members irq, ocr_mask from struct meson_host Heiner Kallweit
2017-02-18 13:08 ` [PATCH v3 4/10] mmc: meson-gx: remove unneeded variable in meson_mmc_clk_init Heiner Kallweit
2017-02-18 13:09 ` [PATCH v3 5/10] mmc: meson-gx: remove member parent_mux from struct meson_host Heiner Kallweit
2017-02-18 13:19 ` [PATCH v3 6/10] mmc: meson-gx: fix error path in meson_mmc_clk_init / meson_mmc_probe Heiner Kallweit
2017-02-18 13:57   ` Michał Zegan
2017-02-18 15:22     ` Heiner Kallweit
2017-02-18 15:30       ` Michał Zegan
2017-02-28  3:06   ` Kevin Hilman [this message]
2017-02-18 13:20 ` [PATCH v3 7/10] mmc: meson-gx: remove unneeded devm_kstrdup in meson_mmc_clk_init Heiner Kallweit
2017-02-18 13:22 ` [PATCH v3 8/10] mmc: meson-gx: improve initial configuration Heiner Kallweit
2017-02-18 13:23 ` [PATCH v3 9/10] mmc: meson-gx: remove member mrq from struct meson_host Heiner Kallweit
2017-02-18 13:26 ` [PATCH v3 10/10] mmc: meson-gx: replace magic timeout numbers with constants Heiner Kallweit
2017-02-28  3:07   ` Kevin Hilman
2017-03-01 18:09 ` [PATCH v3 1/10] mmc: meson-gx: simplify bounce buffer setting in meson_mmc_start_cmd Kevin Hilman
2017-03-01 20:20   ` Heiner Kallweit
2017-03-03 18:17     ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m2tw7f10a4.fsf@baylibre.com \
    --to=khilman@baylibre.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®