From: sashiko-bot@kernel.org
To: "Lucas Tanure" <tanure@linux.com>
Cc: devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
robh@kernel.org, conor+dt@kernel.org, neil.armstrong@linaro.org
Subject: Re: [PATCH v6 2/7] dt-bindings: net: amlogic,meson-dwmac: add amlogic,t7-dwmac
Date: Fri, 06 Nov 2026 10:04:23 +0000 [thread overview]
Message-ID: <sashiko-outbox-201171@kernel.org> (raw)
In-Reply-To: <20261105100322.37816-3-tanure@linux.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Low] dt-bindings: net: amlogic,meson-dwmac: unwieldy per-compatible
conditionals
--
commit bc12f1675c9788e6cacf4400aec8cfab4ff91981
Author: Lucas Tanure <tanure@linux.com>
dt-bindings: net: amlogic,meson-dwmac: add amlogic,t7-dwmac
This commit adds the amlogic,t7-dwmac compatible string and its associated
clock and delay constraints to the Amlogic Meson DWMAC device tree binding
schema.
> diff --git a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
> index e769c9bb70d84..ff5e50f651144 100644
> --- a/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml
[ ... ]
> @@ -84,6 +85,49 @@ allOf:
> rx-internal-delay-ps:
> default: 0
>
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: amlogic,t7-dwmac
> + then:
> + properties:
> + clocks:
> + items:
> + - description: GMAC main clock
> + - description: First parent clock of the internal mux
> + - description: Second parent clock of the internal mux
> + - description:
> + clock of the pipeline stage inserted in the bus path between
> + the controller and the DRAM. Without it, the controller cannot
> + complete DMA transfers.
> + - description:
> + clock of the register block holding PRG_ETH0 and PRG_ETH1.
> + Without it, the block reads as zero and ignores writes.
> +
> + clock-names:
> + items:
> + - const: stmmaceth
> + - const: clkin0
> + - const: clkin1
> + - const: pipeline
> + - const: pclk
> +
> + # The PHY adds the 2ns RGMII delays, see ethernet-controller.yaml.
> + # The RX delay line of this glue is fine tuning in 200ps steps,
> + # added on top of what phy-mode describes. The TX side has no fine
> + # tuning: its only step is a quarter of the clock period, the full
> + # 2ns at 1Gbit/s, so the TX property is not accepted.
> + rx-internal-delay-ps:
> + default: 0
> +
> + tx-internal-delay-ps: false
> +
> + # Deprecated: new SoCs use the standard *-internal-delay-ps
> + # properties instead.
> + amlogic,tx-delay-ns: false
> + amlogic,rx-delay-ns: false
> +
> - if:
> properties:
> compatible:
> @@ -106,6 +150,7 @@ allOf:
> contains:
> enum:
> - amlogic,meson-g12a-dwmac
> + - amlogic,t7-dwmac
> then:
> properties:
> rx-internal-delay-ps:
> @@ -142,6 +187,10 @@ properties:
> - items:
> - const: amlogic,meson6-dwmac
> - const: snps,dwmac
> + - items:
> + - const: amlogic,t7-dwmac
> + - const: snps,dwmac-5.10a
> + - const: snps,dwmac
[Severity: Low]
This isn't a bug, but as reported by Sashiko on v5 [1], the amlogic,t7-dwmac
variant differs substantially from the existing Meson6 and Meson8b-through-G12A
variants in Documentation/devicetree/bindings/net/amlogic,meson-dwmac.yaml: it
uses a different Synopsys core fallback (snps,dwmac-5.10a instead of
snps,dwmac-3.70a or snps,dwmac), requires a different five-clock list
(stmmaceth, clkin0, clkin1, pipeline, pclk without timing-adjustment), and
disallows tx-internal-delay-ps as well as the legacy amlogic,tx-delay-ns and
amlogic,rx-delay-ns properties.
Rather than piling another large per-compatible if-then conditional block into
allOf and splitting the rx-internal-delay-ps constraints for amlogic,t7-dwmac
across two separate if-then blocks in allOf (while also setting
amlogic,tx-delay-ns and amlogic,rx-delay-ns to false even though those vendor
properties are only defined inside the mutually exclusive Meson8b-through-G12A
conditional branch and are already rejected by unevaluatedProperties: false),
would it be cleaner to split the divergent T7 binding into a separate schema
document?
[1] https://lore.kernel.org/r/20261103163715.385394-3-tanure@linux.com
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261105100322.37816-1-tanure@linux.com?part=2
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2026-11-06 10:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-05 10:03 [PATCH v6 0/7] Add ethernet support for the Amlogic T7 Lucas Tanure
2026-11-05 10:03 ` [PATCH v6 1/7] dt-bindings: net: amlogic,meson-dwmac: list the compatible combinations Lucas Tanure
2026-11-05 10:03 ` [PATCH v6 2/7] dt-bindings: net: amlogic,meson-dwmac: add amlogic,t7-dwmac Lucas Tanure
2026-11-06 10:04 ` sashiko-bot [this message]
2026-11-05 10:03 ` [PATCH v6 3/7] net: stmmac: dwmac-meson8b: add support for the Amlogic T7 Lucas Tanure
2026-11-05 10:03 ` [PATCH v6 4/7] net: stmmac: dwmac-meson8b: follow the generic RGMII delay rules on the T7 Lucas Tanure
2026-11-05 10:03 ` [PATCH v6 5/7] arm64: dts: amlogic: t7: add the ethernet pinctrl nodes Lucas Tanure
2026-11-05 10:03 ` [PATCH v6 6/7] arm64: dts: amlogic: t7: add the ethernet controller Lucas Tanure
2026-11-05 10:03 ` [PATCH v6 7/7] arm64: dts: amlogic: t7: khadas-vim4: enable the ethernet port Lucas Tanure
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-201171@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=tanure@linux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®