From: Zhang Ning <zhangn1985@qq.com>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: robh+dt@kernel.org, linux-amlogic@lists.infradead.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH] Add MagicBox M16S support
Date: Fri, 22 Jul 2022 15:10:15 +0800 [thread overview]
Message-ID: <tencent_33259B2969FF89B5861683B98BB931D97607@qq.com> (raw)
In-Reply-To: <44f1117c-3e9a-e9d0-6d88-0f4a233f19e1@baylibre.com>
Hi Neil
I got these info from vendor OS:
<6>[ 0.538173] c0 1 (swapper/0) aml_wifi wifi.33: [wifi_dev_probe] no power_on_pin2
<6>[ 0.538183] c0 1 (swapper/0) aml_wifi wifi.33: [wifi_dev_probe] interrupt_pin=241
<6>[ 0.538190] c0 1 (swapper/0) aml_wifi wifi.33: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
<6>[ 0.538198] c0 1 (swapper/0) aml_wifi wifi.33: [wifi_dev_probe] power_on_pin=206
<6>[ 0.538204] c0 1 (swapper/0) aml_wifi wifi.33: [wifi_dev_probe] clock_32k_pin=0
<6>[ 0.538211] c0 1 (swapper/0) aml_wifi wifi.33: [wifi_dev_probe] host_sleep_wifi=0
<6>[ 0.538218] c0 1 (swapper/0) aml_wifi wifi.33: [wifi_dev_probe] shutdown_wifi = 0
<6>[ 0.538513] c1 1 (swapper/0) aml_wifi wifi.33: [wifi_setup_dt] wifi_setup_dt
<6>[ 0.538559] c1 1 (swapper/0) aml_wifi wifi.33: [wifi_setup_dt] interrupt_pin(241)
<6>[ 0.538575] c1 1 (swapper/0) aml_wifi wifi.33: [wifi_setup_dt] delay 1000us
<6>[ 0.539585] c1 1 (swapper/0) aml_wifi wifi.33: [wifi_setup_dt] power_on_pin(206)
<6>[ 0.539592] c1 1 (swapper/0) aml_wifi wifi.33: [wifi_setup_dt] power_level=0
GPIOs 145-154, platform/c1109880.pinmux, ao-bank:
gpio-147 (gpio_key ) in hi
GPIOs 155-255, platform/c1109880.pinmux, banks:
gpio-172 (sda ) in hi GPIOH_1
gpio-173 (scl ) in hi GPIOH_2
gpio-176 (mute_gpio ) out hi GPIOH_5 dio2133
gpio-190 (amlsd ) out hi BOOT_9 emmc_pwrseq
gpio-203 (amlsd ) in hi CARD_6 sd_emmc_b cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
gpio-206 (sdio_wifi ) out hi GPIODV_2 sdio_pwrseq
gpio-241 (sdio_wifi ) in lo GPIOX_7 interrupt-parent = <&pio>; interrupts = <38 IRQ_TYPE_LEVEL_LOW>;
gpio-251 (bt_rfkill ) in lo GPIOX_17 shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
The right 2 columns are my comments.
it's easy to add gpio-keys (maybe reset hole) and i2c-gpio (I need more info about devices
under this bus).
I think GPIODV_2 is for sdio_pwrseq.
current dtb has a issue: wifi lost after reboot, below is the error.
mmc/core/sdio.c: pr_err("%s: error %d whilst initialising SDIO card\n",
after I change sdio_pwrseq gpio to GPIODV_2, no such error.
Now it requires me to finish wifi&bt device tree items to make wifi/bt
work. But I don't know how.
could I only submit what I can do right now (include gpio-keys and
i2c-gpio if has subdevice)?
On Thu, Jul 21, 2022 at 07:55:03PM +0200, Neil Armstrong wrote:
> On 21/07/2022 16:37, Zhang Ning wrote:
> > On Mon, Jul 18, 2022 at 10:02:32AM +0200, Neil Armstrong wrote:
> >
> > Thank you for review.
> > > Hi,
> > >
> > > On 12/07/2022 16:24, Zhang Ning wrote:
> > > > MagicBox M16S or MagicBox 3Pro is popular Tv box in China.
> > > >
> > > > it's gxm_q201_v1 according u-boot log.
> > > > and it's almost same as Q201 reference design.
> > > >
> > > > add a simple dts to support this Tv box.
> > > >
> > > > Signed-off-by: Zhang Ning <zhangn1985@qq.com>
> > > > ---
> > > > arch/arm64/boot/dts/amlogic/Makefile | 1 +
> > > > .../dts/amlogic/meson-gxm-magicbox-m16s.dts | 20 +++++++++++++++++++
> > > > 2 files changed, 21 insertions(+)
> > > > create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > > >
> > > > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
> > > > index 8773211df50e..e0907fb41829 100644
> > > > --- a/arch/arm64/boot/dts/amlogic/Makefile
> > > > +++ b/arch/arm64/boot/dts/amlogic/Makefile
> > > > @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-libretech-cc.dtb
> > > > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
> > > > dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
> > > > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
> > > > +dtb-$(CONFIG_ARCH_MESON) += meson-gxm-magicbox-m16s.dtb
> > > > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
> > > > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
> > > > dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
> > > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > > > new file mode 100644
> > > > index 000000000000..be543d65a529
> > > > --- /dev/null
> > > > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-magicbox-m16s.dts
> > > > @@ -0,0 +1,20 @@
> > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > > > +/*
> > > > + * Copyright (c) 2022 Zhang Ning <zhangn1985@qq.com>
> > > > + */
> > > > +
> > > > +/dts-v1/;
> > > > +
> > > > +#include "meson-gxm.dtsi"
> > > > +#include "meson-gx-p23x-q20x.dtsi"
> > > > +#include <dt-bindings/input/input.h>
> > > > +#include <dt-bindings/leds/common.h>
> > > > +
> > > > +/ {
> > > > + compatible = "magicbox,m16s", "amlogic,s912", "amlogic,meson-gxm";
> > > > + model = "MagicBox M16S";
> > > > +};
> > >
> > > The compatible should be documented in the DT bindings in:
> > > Documentation/devicetree/bindings/arm/amlogic.yaml
> >
> > I will update this part next version.
> > >
> > > > +ðmac {
> > > > + phy-mode = "rmii";
> > > > + phy-handle = <&internal_phy>;
> > > > +};
> > >
> > > Is the sd_emmc_a change incompatible with the M16S ?
> >
> > sd_emmc_a is used as SDIO for wifi/bt. and wifi/bt works with this dtb.
> > I checked mrvl-sd8997 DT bindings, missing a lot of properties need
> > by mrvl-sd8997.
> >
> > I don't have schematics to fill these properties, need more time to
> > check vendor OS or try each GPIO.
>
> Ok fine no problem, you can push it later when you figure out the properties.
>
> > >
> > > Neil
>
> Neil
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
prev parent reply other threads:[~2022-07-22 7:10 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-12 14:24 Zhang Ning
2022-07-18 8:02 ` Neil Armstrong
2022-07-21 14:37 ` Zhang Ning
2022-07-21 17:55 ` Neil Armstrong
2022-07-22 7:10 ` Zhang Ning [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=tencent_33259B2969FF89B5861683B98BB931D97607@qq.com \
--to=zhangn1985@qq.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®