From: Jingoo Han <jg1.han@samsung.com>
To: "'Andrew Morton'" <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org,
"'Alessandro Zummo'" <a.zummo@towertech.it>,
rtc-linux@googlegroups.com, "'Jingoo Han'" <jg1.han@samsung.com>,
"'Kevin Hilman'" <khilman@linaro.org>,
"'Tony Lindgren'" <tony@atomide.com>,
"'Grygorii Strashko'" <grygorii.strashko@ti.com>,
"'Peter Ujfalusi'" <peter.ujfalusi@ti.com>
Subject: [PATCH 1/2] rtc: rtc-twl: Use devm_*() functions
Date: Thu, 05 Dec 2013 10:03:00 +0900 [thread overview]
Message-ID: <000001cef155$be1674e0$3a435ea0$%han@samsung.com> (raw)
Use devm_*() functions to make cleanup paths simpler, and remove
unnecessary remove().
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
drivers/rtc/rtc-twl.c | 38 +++++++++++++-------------------------
1 file changed, 13 insertions(+), 25 deletions(-)
diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c
index c2e80d7..1915464 100644
--- a/drivers/rtc/rtc-twl.c
+++ b/drivers/rtc/rtc-twl.c
@@ -479,7 +479,7 @@ static int twl_rtc_probe(struct platform_device *pdev)
u8 rd_reg;
if (irq <= 0)
- goto out1;
+ return ret;
/* Initialize the register map */
if (twl_class_is_4030())
@@ -489,7 +489,7 @@ static int twl_rtc_probe(struct platform_device *pdev)
ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG);
if (ret < 0)
- goto out1;
+ return ret;
if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M)
dev_warn(&pdev->dev, "Power up reset detected.\n");
@@ -500,7 +500,7 @@ static int twl_rtc_probe(struct platform_device *pdev)
/* Clear RTC Power up reset and pending alarm interrupts */
ret = twl_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG);
if (ret < 0)
- goto out1;
+ return ret;
if (twl_class_is_6030()) {
twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK,
@@ -512,7 +512,7 @@ static int twl_rtc_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "Enabling TWL-RTC\n");
ret = twl_rtc_write_u8(BIT_RTC_CTRL_REG_STOP_RTC_M, REG_RTC_CTRL_REG);
if (ret < 0)
- goto out1;
+ return ret;
/* ensure interrupts are disabled, bootloaders can be strange */
ret = twl_rtc_write_u8(0, REG_RTC_INTERRUPTS_REG);
@@ -522,34 +522,29 @@ static int twl_rtc_probe(struct platform_device *pdev)
/* init cached IRQ enable bits */
ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG);
if (ret < 0)
- goto out1;
+ return ret;
device_init_wakeup(&pdev->dev, 1);
- rtc = rtc_device_register(pdev->name,
- &pdev->dev, &twl_rtc_ops, THIS_MODULE);
+ rtc = devm_rtc_device_register(&pdev->dev, pdev->name,
+ &twl_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
- ret = PTR_ERR(rtc);
dev_err(&pdev->dev, "can't register RTC device, err %ld\n",
PTR_ERR(rtc));
- goto out1;
+ return PTR_ERR(rtc);
}
- ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt,
- IRQF_TRIGGER_RISING | IRQF_ONESHOT,
- dev_name(&rtc->dev), rtc);
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ twl_rtc_interrupt,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ dev_name(&rtc->dev), rtc);
if (ret < 0) {
dev_err(&pdev->dev, "IRQ is not free.\n");
- goto out2;
+ return ret;
}
platform_set_drvdata(pdev, rtc);
return 0;
-
-out2:
- rtc_device_unregister(rtc);
-out1:
- return ret;
}
/*
@@ -559,9 +554,6 @@ out1:
static int twl_rtc_remove(struct platform_device *pdev)
{
/* leave rtc running, but disable irqs */
- struct rtc_device *rtc = platform_get_drvdata(pdev);
- int irq = platform_get_irq(pdev, 0);
-
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
if (twl_class_is_6030()) {
@@ -571,10 +563,6 @@ static int twl_rtc_remove(struct platform_device *pdev)
REG_INT_MSK_STS_A);
}
-
- free_irq(irq, rtc);
-
- rtc_device_unregister(rtc);
return 0;
}
--
1.7.10.4
next reply other threads:[~2013-12-05 1:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-05 1:03 Jingoo Han [this message]
2013-12-05 1:05 ` [PATCH 2/2] rtc: rtc-vr41xx: " Jingoo Han
2013-12-05 16:50 ` [PATCH 1/2] rtc: rtc-twl: " Grygorii Strashko
2013-12-06 1:49 ` Jingoo Han
2013-12-06 14:53 ` Grygorii Strashko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000001cef155$be1674e0$3a435ea0$%han@samsung.com' \
--to=jg1.han@samsung.com \
--cc=a.zummo@towertech.it \
--cc=akpm@linux-foundation.org \
--cc=grygorii.strashko@ti.com \
--cc=khilman@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=peter.ujfalusi@ti.com \
--cc=rtc-linux@googlegroups.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®