From: Jingoo Han <jg1.han@samsung.com>
To: "'Mark Brown'" <broonie@opensource.wolfsonmicro.com>,
"'Florian Tobias Schandinat'" <FlorianSchandinat@gmx.de>
Cc: linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: RE: [PATCH 1/6] video: s3c-fb: Make runtime PM functional again
Date: Thu, 29 Dec 2011 08:54:08 +0900 [thread overview]
Message-ID: <000701ccc5bb$fd172350$f74569f0$%han@samsung.com> (raw)
In-Reply-To: <1324995372-3410-1-git-send-email-broonie@opensource.wolfsonmicro.com>
> -----Original Message-----
> From: Mark Brown [mailto:broonie@opensource.wolfsonmicro.com]
> Sent: Tuesday, December 27, 2011 11:16 PM
> To: Jingoo Han; Florian Tobias Schandinat
> Cc: linux-fbdev@vger.kernel.org; linux-kernel@vger.kernel.org; Mark Brown
> Subject: [PATCH 1/6] video: s3c-fb: Make runtime PM functional again
>
> The change in "video: s3c-fb: modify runtime pm functions" (commit
> 35784b) renders the runtime power management for the device completely
> ineffectual as while it leaves runtime power management notionally
> enabled a runtime power reference is held for the entire time the device
> is registered meaning it will never actually do anything.
>
> A further issue is introduced as runtime power management is added
> during the system suspend path which is not something which drivers are
> supposed to do and would interact poorly if there were any operations
> done in the runtime power management callbacks.
>
> While this does make things simpler (the main motivation for the
> original change) it will not only cause us to use more power in the
> framebuffer controller but will also prevent us entering lower power
> domain and SoC wide states as we can never power down the domain
> containing the device. Since neither of these things is desirable
> revert the change.
>
> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
> ---
> drivers/video/s3c-fb.c | 51 +++++++++++++++++++++++++++++------------------
> 1 files changed, 31 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
> index a0b3fd6..b1a75a0 100644
> --- a/drivers/video/s3c-fb.c
> +++ b/drivers/video/s3c-fb.c
> @@ -1038,8 +1038,30 @@ static int s3c_fb_ioctl(struct fb_info *info, unsigned int cmd,
> return ret;
> }
>
> +static int s3c_fb_open(struct fb_info *info, int user)
> +{
> + struct s3c_fb_win *win = info->par;
> + struct s3c_fb *sfb = win->parent;
> +
> + pm_runtime_get_sync(sfb->dev);
> +
> + return 0;
> +}
> +
> +static int s3c_fb_release(struct fb_info *info, int user)
> +{
> + struct s3c_fb_win *win = info->par;
> + struct s3c_fb *sfb = win->parent;
> +
> + pm_runtime_put_sync(sfb->dev);
> +
> + return 0;
> +}
> +
> static struct fb_ops s3c_fb_ops = {
> .owner = THIS_MODULE,
> + .fb_open = s3c_fb_open,
> + .fb_release = s3c_fb_release,
> .fb_check_var = s3c_fb_check_var,
> .fb_set_par = s3c_fb_set_par,
> .fb_blank = s3c_fb_blank,
> @@ -1446,6 +1468,7 @@ static int __devinit s3c_fb_probe(struct platform_device *pdev)
> }
>
> platform_set_drvdata(pdev, sfb);
> + pm_runtime_put_sync(sfb->dev);
>
> return 0;
>
> @@ -1485,6 +1508,8 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
> struct s3c_fb *sfb = platform_get_drvdata(pdev);
> int win;
>
> + pm_runtime_get_sync(sfb->dev);
> +
> for (win = 0; win < S3C_FB_MAX_WIN; win++)
> if (sfb->windows[win])
> s3c_fb_release_win(sfb, sfb->windows[win]);
> @@ -1510,7 +1535,7 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
> return 0;
> }
>
> -#ifdef CONFIG_PM_SLEEP
> +#ifdef CONFIG_PM
> static int s3c_fb_suspend(struct device *dev)
> {
> struct platform_device *pdev = to_platform_device(dev);
> @@ -1531,8 +1556,6 @@ static int s3c_fb_suspend(struct device *dev)
> clk_disable(sfb->lcd_clk);
>
> clk_disable(sfb->bus_clk);
> - pm_runtime_put_sync(sfb->dev);
> -
> return 0;
> }
>
> @@ -1544,7 +1567,6 @@ static int s3c_fb_resume(struct device *dev)
> struct s3c_fb_win *win;
> int win_no;
>
> - pm_runtime_get_sync(sfb->dev);
> clk_enable(sfb->bus_clk);
>
> if (!sfb->variant.has_clksel)
> @@ -1583,19 +1605,11 @@ static int s3c_fb_resume(struct device *dev)
>
> return 0;
> }
> +#else
> +#define s3c_fb_suspend NULL
> +#define s3c_fb_resume NULL
> #endif
>
> -#ifdef CONFIG_PM_RUNTIME
> -static int s3c_fb_runtime_suspend(struct device *dev)
> -{
> - return 0;
> -}
> -
> -static int s3c_fb_runtime_resume(struct device *dev)
> -{
> - return 0;
> -}
> -#endif
>
> #define VALID_BPP124 (VALID_BPP(1) | VALID_BPP(2) | VALID_BPP(4))
> #define VALID_BPP1248 (VALID_BPP124 | VALID_BPP(8))
> @@ -1918,10 +1932,7 @@ static struct platform_device_id s3c_fb_driver_ids[] = {
> };
> MODULE_DEVICE_TABLE(platform, s3c_fb_driver_ids);
>
> -static const struct dev_pm_ops s3c_fb_pm_ops = {
> - SET_SYSTEM_SLEEP_PM_OPS(s3c_fb_suspend, s3c_fb_resume)
> - SET_RUNTIME_PM_OPS(s3c_fb_runtime_suspend, s3c_fb_runtime_resume, NULL)
> -};
> +static UNIVERSAL_DEV_PM_OPS(s3cfb_pm_ops, s3c_fb_suspend, s3c_fb_resume, NULL);
>
> static struct platform_driver s3c_fb_driver = {
> .probe = s3c_fb_probe,
> @@ -1930,7 +1941,7 @@ static struct platform_driver s3c_fb_driver = {
> .driver = {
> .name = "s3c-fb",
> .owner = THIS_MODULE,
> - .pm = &s3c_fb_pm_ops,
> + .pm = &s3cfb_pm_ops,
> },
> };
>
> --
> 1.7.7.3
next prev parent reply other threads:[~2011-12-28 23:54 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-27 14:15 [PATCH 0/6] video: s3c-fb: Use runtime suspend while blanked Mark Brown
2011-12-27 14:16 ` [PATCH 1/6] video: s3c-fb: Make runtime PM functional again Mark Brown
2011-12-27 14:16 ` [PATCH 2/6] video: s3c-fb: Use s3c_fb_enable() to enable the framebuffer Mark Brown
2011-12-27 14:16 ` [PATCH 3/6] video: s3c-fb: Disable runtime PM in error paths from probe Mark Brown
2011-12-28 23:54 ` Jingoo Han
2011-12-27 14:16 ` [PATCH 4/6] video: s3c-fb: Take a runtime PM reference when unblanked Mark Brown
2011-12-28 23:54 ` Jingoo Han
2011-12-27 14:16 ` [PATCH 5/6] video: s3c-fb: Hold runtime PM references when touching registers Mark Brown
2011-12-28 23:55 ` Jingoo Han
2011-12-27 14:16 ` [PATCH 6/6] video: s3c-fb: Don't keep device runtime active when open Mark Brown
2011-12-28 23:55 ` Jingoo Han
2011-12-28 23:54 ` Jingoo Han [this message]
2012-01-09 2:35 ` [PATCH 0/6] video: s3c-fb: Use runtime suspend while blanked Florian Tobias Schandinat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000701ccc5bb$fd172350$f74569f0$%han@samsung.com' \
--to=jg1.han@samsung.com \
--cc=FlorianSchandinat@gmx.de \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®