From: "Nilanjan Bhowmik" <nilu@iomachine.com>
To: <linux-kernel@vger.kernel.org>
Subject: Kernel 2.4.19: Tulip network card does not sync with Dumb 10/100 Linksys 8 port Etherfast switch
Date: Sat, 10 Aug 2002 13:24:42 -0400 [thread overview]
Message-ID: <000b01c24092$d0d0c160$63c8a8c0@arunachal> (raw)
This happend on a working machine. After I have upgraded to 2.4.19, tulip
driver
will not work. Only way to sync it is loading the driver couple of times
and that too
it will sync at 10/half.
This is working fine with the 2.4.7-10 stock redhat kernel.
Unfortunately I can't get into the server with 2.4.19 running so I have
gathered this while 2.4.7-10.
I can reproduce this every time. So, if you want me to run a test etc. I
can.
nilu@calculator.nilu.net-4->lspci
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev
03)
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 01)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 01)
00:0e.0 Bridge: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 02)
00:0f.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2164W
[Millennium II]
00:10.0 Ethernet controller: Lite-On Communications Inc LNE100TX [Linksys
EtherFast 10/100] (rev 25)
nilu@calculator.nilu.net-5->cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0213-0213 : isapnp read
02e8-02ef : serial(auto)
02f8-02ff : serial(auto)
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
0778-077a : parport0
0a79-0a79 : isapnp write
0cf8-0cff : PCI conf1
1000-100f : Intel Corporation 82371AB PIIX4 IDE
1000-1007 : ide0
1008-100f : ide1
1020-103f : Intel Corporation 82371AB PIIX4 USB
1020-103f : usb-uhci
1080-10ff : PLX Tech
nology, Inc. PCI <-> IOBus Bridge
1400-14ff : Lite-On Communications Inc LNE100TX [Linksys EtherFast 10/100]
1400-14ff : tulip
7000-701f : Intel Corporation 82371AB PIIX4 ACPI
8000-803f : Intel Corporation 82371AB PIIX4 ACPI
Module Size Used by
nfsd 70720 8 (autoclean)
lockd 52880 1 (autoclean) [nfsd]
sunrpc 64688 1 (autoclean) [nfsd lockd]
parport_pc 14768 1 (autoclean)
lp 6416 0 (autoclean)
parport 25600 1 (autoclean) [parport_pc lp]
autofs 11520 0 (autoclean) (unused)
tulip 39232 1
usb-uhci 21536 0 (unused)
usbcore 51712 1 [usb-uhci]
ext3 64624 4
jbd 40992 4 [ext3]
Linux calculator.nilu.net 2.4.7-10 #1 Thu Sep 6 17:27:27 EDT 2001 i686
unknown
Gnu C 2.96
Gnu make 3.79.1
binutils 2.11.90.0.8
util-linux 2.11f
mount 2.11g
modutils 2.4.6
e2fsprogs 1.23
reiserfsprogs 3.x.0j
PPP 2.4.1
isdn4k-utils 3.1pre1
Linux C Library 2.2.4
Dynamic linker (ldd) 2.2.4
Procps 2.0.7
Net-tools 1.60
Console-tools 0.3.3
Sh-utils 2.0.11
Modules Loaded nfsd lockd sunrpc parport_pc lp parport autofs tulip
usb-uhci usbcore ext3 jbd
next reply other threads:[~2002-08-10 17:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-10 17:24 Nilanjan Bhowmik [this message]
2002-08-10 18:04 ` Darrell A. Escola
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000b01c24092$d0d0c160$63c8a8c0@arunachal' \
--to=nilu@iomachine.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®