[PATCH 04/20] regulator: da9063: use devm_regulator_register()

[Jingoo Han <jg1.han@samsung.com>]

Use devm_regulator_register() to make cleanup paths simpler.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
 drivers/regulator/da9063-regulator.c |   21 ++++-----------------
 1 file changed, 4 insertions(+), 17 deletions(-)

diff --git a/drivers/regulator/da9063-regulator.c b/drivers/regulator/da9063-regulator.c
index 3d910f4..56727eb 100644
--- a/drivers/regulator/da9063-regulator.c
+++ b/drivers/regulator/da9063-regulator.c
@@ -847,13 +847,13 @@ static int da9063_regulator_probe(struct platform_device *pdev)
 		if (da9063_reg_matches)
 			config.of_node = da9063_reg_matches[id].of_node;
 		config.regmap = da9063->regmap;
-		regl->rdev = regulator_register(&regl->desc, &config);
+		regl->rdev = devm_regulator_register(&pdev->dev, &regl->desc,
+						     &config);
 		if (IS_ERR(regl->rdev)) {
 			dev_err(&pdev->dev,
 				"Failed to register %s regulator\n",
 				regl->desc.name);
-			ret = PTR_ERR(regl->rdev);
-			goto err;
+			return PTR_ERR(regl->rdev);
 		}
 		id++;
 		n++;
@@ -862,9 +862,8 @@ static int da9063_regulator_probe(struct platform_device *pdev)
 	/* LDOs overcurrent event support */
 	irq = platform_get_irq_byname(pdev, "LDO_LIM");
 	if (irq < 0) {
-		ret = irq;
 		dev_err(&pdev->dev, "Failed to get IRQ.\n");
-		goto err;
+		return irq;
 	}
 
 	regulators->irq_ldo_lim = regmap_irq_get_virq(da9063->regmap_irq, irq);
@@ -881,27 +880,15 @@ static int da9063_regulator_probe(struct platform_device *pdev)
 	}
 
 	return 0;
-
-err:
-	/* Wind back regulators registeration */
-	while (--n >= 0)
-		regulator_unregister(regulators->regulator[n].rdev);
-
-	return ret;
 }
 
 static int da9063_regulator_remove(struct platform_device *pdev)
 {
 	struct da9063_regulators *regulators = platform_get_drvdata(pdev);
-	struct da9063_regulator *regl;
 
 	free_irq(regulators->irq_ldo_lim, regulators);
 	free_irq(regulators->irq_uvov, regulators);
 
-	for (regl = &regulators->regulator[regulators->n_regulators - 1];
-	     regl >= &regulators->regulator[0]; regl--)
-		regulator_unregister(regl->rdev);
-
 	return 0;
 }
 
-- 
1.7.10.4