From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Wed, 30 May 2001 10:48:40 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Wed, 30 May 2001 10:48:29 -0400 Received: from tomts5.bellnexxia.net ([209.226.175.25]:42891 "EHLO tomts5-srv.bellnexxia.net") by vger.kernel.org with ESMTP id ; Wed, 30 May 2001 10:48:17 -0400 Message-ID: <000e01c0e917$60fbacc0$0a01a8c0@w98> From: "Rose, Daniel" To: Subject: via-rhine DFE-530TX rev A1 Date: Wed, 30 May 2001 10:46:42 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2462.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2462.0000 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org It seems as though my card will not reset anymore after running windows 98, even after a cold boot, and recompiling the kernel. Below is the output of dmesg, lspci -n and ifconfig. Does anyone have any ideas? (please cc replies) Linux version 2.4.5 (root@rocket) (gcc version 2.95.3 20010315 (release)) #4 Tue May 29 13:34:48 EDT 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable) BIOS-e820: 0000000017ff0000 - 0000000017ff8000 (ACPI data) BIOS-e820: 0000000017ff8000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 98288 zone(0): 4096 pages. zone(1): 94192 pages. zone(2): 0 pages. Kernel command line: auto BOOT_IMAGE=2.4.5 ro root=342 BOOT_FILE=/boot/vmlinuz-2.4.5 hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 866.680 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1730.15 BogoMIPS Memory: 384368k/393152k available (1079k kernel code, 8396k reserved, 348k data, 204k init, 0k highmem) Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000 CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000 CPU: Common caps: 0383f9ff 00000000 00000000 00000000 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Disabled enhanced CPU to PCI posting PCI: Disabled enhanced CPU to PCI posting #2 PCI: Using IRQ router VIA [1106/0686] at 00:07.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 0x378: FIFO is 16 bytes 0x378: writeIntrThreshold is 8 0x378: readIntrThreshold is 8 0x378: PWord is 8 bits 0x378: Interrupts are ISA-Pulses 0x378: ECP port cfgA=0x10 cfgB=0x00 0x378: ECP settings irq= dma= parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP] parport0: cpp_daisy: aa5500ff(98) parport0: assign_addrs: aa5500ff(98) parport0: Printer, Canon BJC-1000 parport_pc: Via 686A parallel port: io=0x378 pty: 256 Unix98 ptys configured Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A block: queued sectors max/low 255210kB/124138kB, 768 slots per queue Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 39 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later hda: FUJITSU MPG3204AH, ATA DISK drive hdb: WDC WD307AA, ATA DISK drive hdc: CDU5211, ATAPI CD/DVD-ROM drive hdd: MATSHITA CD-RW CW-7586, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 40031712 sectors (20496 MB) w/2048KiB Cache, CHS=2491/255/63 hdb: 60074784 sectors (30758 MB) w/2048KiB Cache, CHS=3739/255/63 hdc: ATAPI 52X CD-ROM drive, 120kB Cache Uniform CD-ROM driver Revision: 3.12 Partition check: hda: hda1 hdb: hdb1 hdb2 hdb3 < hdb5 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) via-rhine.c:v1.08b-LK1.1.8 4/17/2000 Written by Donald Becker http://www.scyld.com/network/via-rhine.html PCI: Found IRQ 10 for device 00:11.0 PCI: The same IRQ used for device 00:07.2 eth0: VIA VT6102 Rhine-II at 0xd000, 00:00:00:00:00:00, IRQ 10. PPP generic driver version 2.4.1 PPP Deflate Compression module registered PPP BSD Compression module registered Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 321M agpgart: Detected Via Apollo Pro chipset agpgart: AGP aperture is 64M @ 0xe8000000 [drm] AGP 0.99 on VIA Apollo Pro @ 0xe8000000 64MB [drm] Initialized tdfx 1.0.0 20000928 on minor 63 [drm] AGP 0.99 on VIA Apollo Pro @ 0xe8000000 64MB [drm] Initialized radeon 1.0.0 20010105 on minor 62 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: MATSHITA Model: CD-RW CW-7586 Rev: 1.08 Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 8x/32x writer cd/rw xa/form2 cdda tray es1371: version v0.30 time 20:29:48 May 28 2001 PCI: Found IRQ 11 for device 00:0e.0 es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02 es1371: found es1371 rev 2 at io 0xd800 irq 11 es1371: features: joystick 0x0 ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) ip_tables: (c)2000 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 204k freed Adding Swap: 393552k swap-space (priority -1) pppoe uses obsolete (PF_INET,SOCK_PACKET) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) cdrom: This disc doesn't have any tracks I recognize! 00:00.0 Class 0600: 1106:0691 (rev c4) 00:01.0 Class 0604: 1106:8598 00:07.0 Class 0601: 1106:0686 (rev 40) 00:07.1 Class 0101: 1106:0571 (rev 06) 00:07.2 Class 0c03: 1106:3038 (rev 16) 00:07.4 Class 0c05: 1106:3057 (rev 40) 00:0e.0 Class 0401: 1274:5880 (rev 02) 00:10.0 Class 0780: 125d:2898 (rev 03) 00:11.0 Class 0200: 1106:3065 (rev 42) 01:00.0 Class 0300: 1002:5246 eth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 Interrupt:10 Base address:0xd000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0