Hello. I have a PCCHIPS (www.pcchips.com.tw) M841LR motherboard with a SiS chipset, i also have a Tekram DC-390F SCSI adapter and a SCSI disk. After installing Redhat 7.2 succesfully, i wanted then to upgrade my kernel to the latest stable one (2.4.18), so when i tried to boot the new kernel i got a kernel panic stating that it couldn't mount the root partition, after checking the kernel messages i saw that the scsi adapter module couldn't be loaded (i use an initrd to boot, using RH's nash), going up into the kernel messages i found this: PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: PCI System does not support PCI i then tried using a packaged Redhat kernel (kernel-2.4.9-31.athlon.rpm) with noluck since the PCI subsystem was not recognized either. After booting countless times, i was told by a friend to try 2.4.19-pre5, and it gave me the same error about the PCI subsystem. i'm attaching all the info that i can about my system, the dmesg.txt i'm attaching is from the 2.4.7-10 (the stock kernel that comes with RH 7.2), since i can't boot either of the newer kernels. I can provide any other info you may require. Atahualpa Ledesma Linux/Unix System Administrator Rubiera, Servicios Tecnicos, S. A. www.rubiera.net