From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 4 Apr 2002 09:59:38 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 4 Apr 2002 09:59:34 -0500 Received: from mail3.codetel.net.do ([196.3.81.53]:22033 "EHLO codetel.net.do") by vger.kernel.org with ESMTP id ; Thu, 4 Apr 2002 09:59:25 -0500 Message-ID: <000e01c1dbe9$4d3caed0$78050662@atax> From: "Atahualpa Ledesma" To: Subject: [PROBLEM] PCI Subsystem not recognized by newer ( > 2.4.7-10) kernels Date: Thu, 4 Apr 2002 10:59:18 -0400 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_000B_01C1DBC7.C58DBD60" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2600.0000 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_000B_01C1DBC7.C58DBD60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Hello. I have a PCCHIPS (www.pcchips.com.tw) M841LR motherboard with a SiS chipset, i also have a Tekram DC-390F SCSI adapter and a SCSI disk. After installing Redhat 7.2 succesfully, i wanted then to upgrade my kernel to the latest stable one (2.4.18), so when i tried to boot the new kernel i got a kernel panic stating that it couldn't mount the root partition, after checking the kernel messages i saw that the scsi adapter module couldn't be loaded (i use an initrd to boot, using RH's nash), going up into the kernel messages i found this: PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: PCI System does not support PCI i then tried using a packaged Redhat kernel (kernel-2.4.9-31.athlon.rpm) with noluck since the PCI subsystem was not recognized either. After booting countless times, i was told by a friend to try 2.4.19-pre5, and it gave me the same error about the PCI subsystem. i'm attaching all the info that i can about my system, the dmesg.txt i'm attaching is from the 2.4.7-10 (the stock kernel that comes with RH 7.2), since i can't boot either of the newer kernels. I can provide any other info you may require. Atahualpa Ledesma Linux/Unix System Administrator Rubiera, Servicios Tecnicos, S. A. www.rubiera.net ------=_NextPart_000_000B_01C1DBC7.C58DBD60 Content-Type: text/plain; name="ver_linux-output.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="ver_linux-output.txt" If some fields are empty or look unusual you may have an old version.=0A= Compare to the current minimal requirements in Documentation/Changes.=0A= =0A= Linux athlon 2.4.7-10 #1 Thu Sep 6 16:46:36 EDT 2001 i686 unknown=0A= =0A= Gnu C 2.96=0A= Gnu make 3.79.1=0A= binutils 2.11.90.0.8=0A= util-linux 2.11f=0A= mount 2.11g=0A= modutils 2.4.13=0A= e2fsprogs 1.23=0A= reiserfsprogs 3.x.0j=0A= PPP 2.4.1=0A= isdn4k-utils 3.1pre1=0A= Linux C Library 2.2.4=0A= Dynamic linker (ldd) 2.2.4=0A= Procps 2.0.7=0A= Net-tools 1.60=0A= Console-tools 0.3.3=0A= Sh-utils 2.0.11=0A= Modules Loaded autofs 3c59x ext3 jbd sym53c8xx sd_mod scsi_mod=0A= ------=_NextPart_000_000B_01C1DBC7.C58DBD60 Content-Type: text/plain; name="cpuinfo.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="cpuinfo.txt" processor : 0=0A= vendor_id : AuthenticAMD=0A= cpu family : 6=0A= model : 4=0A= model name : AMD Athlon(tm) Processor=0A= stepping : 4=0A= cpu MHz : 1095.363=0A= cache size : 256 KB=0A= fdiv_bug : no=0A= hlt_bug : no=0A= f00f_bug : no=0A= coma_bug : no=0A= fpu : yes=0A= fpu_exception : yes=0A= cpuid level : 1=0A= wp : yes=0A= flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov = pat pse36 mmx fxsr syscall mmxext 3dnowext 3dnow=0A= bogomips : 2182.34=0A= =0A= ------=_NextPart_000_000B_01C1DBC7.C58DBD60 Content-Type: text/plain; name="iomem.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="iomem.txt" 00000000-0009fbff : System RAM=0A= 0009fc00-0009ffff : reserved=0A= 000a0000-000bffff : Video RAM area=0A= 000c0000-000c7fff : Video ROM=0A= 000c8000-000c9fff : Extension ROM=0A= 000f0000-000fffff : System ROM=0A= 00100000-0dfeffff : System RAM=0A= 00100000-0023fcd7 : Kernel code=0A= 0023fcd8-00256bcf : Kernel data=0A= 0dff0000-0dff7fff : ACPI Tables=0A= 0dff8000-0dffffff : ACPI Non-volatile Storage=0A= bec00000-cecfffff : PCI Bus #01=0A= c0000000-c7ffffff : PCI device 1039:6325 (Silicon Integrated Systems = [SiS])=0A= cf000000-cf7fffff : Silicon Integrated Systems [SiS] 86C326=0A= cfe00000-cfefffff : PCI Bus #01=0A= cfee0000-cfefffff : PCI device 1039:6325 (Silicon Integrated Systems = [SiS])=0A= cffde000-cffdefff : Symbios Logic Inc. (formerly NCR) 53c875=0A= cffdfe80-cffdfeff : 3Com Corporation 3c905C-TX [Fast Etherlink]=0A= cffdff00-cffdffff : Symbios Logic Inc. (formerly NCR) 53c875=0A= cfff0000-cfffffff : Silicon Integrated Systems [SiS] 86C326=0A= d0000000-d3ffffff : PCI device 1039:0740 (Silicon Integrated Systems = [SiS])=0A= fec00000-fec00fff : reserved=0A= fee00000-fee00fff : reserved=0A= ffee0000-ffefffff : reserved=0A= fffc0000-ffffffff : reserved=0A= ------=_NextPart_000_000B_01C1DBC7.C58DBD60 Content-Type: text/plain; name="ioports.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="ioports.txt" 0000-001f : dma1=0A= 0020-003f : pic1=0A= 0040-005f : timer=0A= 0060-006f : keyboard=0A= 0070-007f : rtc=0A= 0080-008f : dma page reg=0A= 00a0-00bf : pic2=0A= 00c0-00df : dma2=0A= 00f0-00ff : fpu=0A= 01f0-01f7 : ide0=0A= 03c0-03df : vga+=0A= 03f6-03f6 : ide0=0A= 03f8-03ff : serial(auto)=0A= 9000-9fff : PCI Bus #01=0A= 9c00-9c7f : PCI device 1039:6325 (Silicon Integrated Systems [SiS])=0A= cc00-cc7f : 3Com Corporation 3c905C-TX [Fast Etherlink]=0A= cc00-cc7f : 00:0b.0=0A= d000-d07f : PCI device 1039:7012 (Silicon Integrated Systems [SiS])=0A= d400-d4ff : PCI device 1039:7012 (Silicon Integrated Systems [SiS])=0A= d800-d8ff : Symbios Logic Inc. (formerly NCR) 53c875=0A= d800-d87f : sym53c8xx=0A= dc00-dc7f : Silicon Integrated Systems [SiS] 86C326=0A= ff00-ff0f : Silicon Integrated Systems [SiS] 5513 [IDE]=0A= ff00-ff07 : ide0=0A= ff08-ff0f : ide1=0A= ------=_NextPart_000_000B_01C1DBC7.C58DBD60 Content-Type: text/plain; name="lspci-vvv.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="lspci-vvv.txt" 00:00.0 Host bridge: Silicon Integrated Systems [SiS]: Unknown device = 0740 (rev 01)=0A= Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B-=0A= Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- = SERR- =0A= =0A= 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP = (prog-if 00 [Normal decode])=0A= Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B-=0A= Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dfast >TAbort- = SERR- Reset- FastB2B-=0A= =0A= 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513=0A= Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- = Stepping- SERR- FastB2B-=0A= Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=3Dmedium >TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- TAbort- = SERR- =0A= =0A= ------=_NextPart_000_000B_01C1DBC7.C58DBD60 Content-Type: text/plain; name="modules.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="modules.txt" autofs 11556 0 (autoclean) (unused)=0A= 3c59x 26408 1=0A= ext3 64608 5=0A= jbd 41060 5 [ext3]=0A= sym53c8xx 57572 6=0A= sd_mod 11576 6=0A= scsi_mod 95752 2 [sym53c8xx sd_mod]=0A= ------=_NextPart_000_000B_01C1DBC7.C58DBD60 Content-Type: text/plain; name="scsi.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="scsi.txt" Attached devices: =0A= Host: scsi0 Channel: 00 Id: 00 Lun: 00=0A= Vendor: FUJITSU Model: MAN3184MP Rev: 0109=0A= Type: Direct-Access ANSI SCSI revision: 03=0A= ------=_NextPart_000_000B_01C1DBC7.C58DBD60 Content-Type: text/plain; name="config-kernel.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="config-kernel.txt" #=0A= # Automatically generated by make menuconfig: don't edit=0A= #=0A= CONFIG_X86=3Dy=0A= CONFIG_ISA=3Dy=0A= # CONFIG_SBUS is not set=0A= CONFIG_UID16=3Dy=0A= =0A= #=0A= # Code maturity level options=0A= #=0A= CONFIG_EXPERIMENTAL=3Dy=0A= =0A= #=0A= # Loadable module support=0A= #=0A= CONFIG_MODULES=3Dy=0A= CONFIG_MODVERSIONS=3Dy=0A= CONFIG_KMOD=3Dy=0A= =0A= #=0A= # Processor type and features=0A= #=0A= # CONFIG_M386 is not set=0A= # CONFIG_M486 is not set=0A= # CONFIG_M586 is not set=0A= # CONFIG_M586TSC is not set=0A= # CONFIG_M586MMX is not set=0A= # CONFIG_M686 is not set=0A= # CONFIG_MPENTIUMIII is not set=0A= # CONFIG_MPENTIUM4 is not set=0A= # CONFIG_MK6 is not set=0A= CONFIG_MK7=3Dy=0A= # CONFIG_MELAN is not set=0A= # CONFIG_MCRUSOE is not set=0A= # CONFIG_MWINCHIPC6 is not set=0A= # CONFIG_MWINCHIP2 is not set=0A= # CONFIG_MWINCHIP3D is not set=0A= # CONFIG_MCYRIXIII is not set=0A= CONFIG_X86_WP_WORKS_OK=3Dy=0A= CONFIG_X86_INVLPG=3Dy=0A= CONFIG_X86_CMPXCHG=3Dy=0A= CONFIG_X86_XADD=3Dy=0A= CONFIG_X86_BSWAP=3Dy=0A= CONFIG_X86_POPAD_OK=3Dy=0A= # CONFIG_RWSEM_GENERIC_SPINLOCK is not set=0A= CONFIG_RWSEM_XCHGADD_ALGORITHM=3Dy=0A= CONFIG_X86_L1_CACHE_SHIFT=3D6=0A= CONFIG_X86_TSC=3Dy=0A= CONFIG_X86_GOOD_APIC=3Dy=0A= CONFIG_X86_USE_3DNOW=3Dy=0A= CONFIG_X86_PGE=3Dy=0A= CONFIG_X86_USE_PPRO_CHECKSUM=3Dy=0A= CONFIG_X86_MCE=3Dy=0A= # CONFIG_TOSHIBA is not set=0A= # CONFIG_I8K is not set=0A= # CONFIG_MICROCODE is not set=0A= # CONFIG_X86_MSR is not set=0A= # CONFIG_X86_CPUID is not set=0A= CONFIG_NOHIGHMEM=3Dy=0A= # CONFIG_HIGHMEM4G is not set=0A= # CONFIG_HIGHMEM64G is not set=0A= # CONFIG_MATH_EMULATION is not set=0A= CONFIG_MTRR=3Dy=0A= # CONFIG_SMP is not set=0A= CONFIG_X86_UP_APIC=3Dy=0A= CONFIG_X86_UP_IOAPIC=3Dy=0A= CONFIG_X86_LOCAL_APIC=3Dy=0A= CONFIG_X86_IO_APIC=3Dy=0A= =0A= #=0A= # General setup=0A= #=0A= CONFIG_NET=3Dy=0A= CONFIG_PCI=3Dy=0A= # CONFIG_PCI_GOBIOS is not set=0A= # CONFIG_PCI_GODIRECT is not set=0A= CONFIG_PCI_GOANY=3Dy=0A= CONFIG_PCI_BIOS=3Dy=0A= CONFIG_PCI_DIRECT=3Dy=0A= CONFIG_PCI_NAMES=3Dy=0A= # CONFIG_EISA is not set=0A= # CONFIG_MCA is not set=0A= CONFIG_HOTPLUG=3Dy=0A= =0A= #=0A= # PCMCIA/CardBus support=0A= #=0A= # CONFIG_PCMCIA is not set=0A= # CONFIG_PCMCIA_SA1100 is not set=0A= =0A= #=0A= # PCI Hotplug Support=0A= #=0A= # CONFIG_HOTPLUG_PCI is not set=0A= # CONFIG_HOTPLUG_PCI_COMPAQ is not set=0A= # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set=0A= # CONFIG_HOTPLUG_PCI_IBM is not set=0A= # CONFIG_HOTPLUG_PCI_ACPI is not set=0A= CONFIG_SYSVIPC=3Dy=0A= CONFIG_BSD_PROCESS_ACCT=3Dy=0A= CONFIG_SYSCTL=3Dy=0A= CONFIG_KCORE_ELF=3Dy=0A= # CONFIG_KCORE_AOUT is not set=0A= CONFIG_BINFMT_AOUT=3Dy=0A= CONFIG_BINFMT_ELF=3Dy=0A= CONFIG_BINFMT_MISC=3Dy=0A= CONFIG_PM=3Dy=0A= CONFIG_ACPI=3Dy=0A= # CONFIG_ACPI_DEBUG is not set=0A= # CONFIG_ACPI_BUSMGR is not set=0A= # CONFIG_ACPI_SYS is not set=0A= # CONFIG_ACPI_CPU is not set=0A= # CONFIG_ACPI_BUTTON is not set=0A= # CONFIG_ACPI_AC is not set=0A= # CONFIG_ACPI_EC is not set=0A= # CONFIG_ACPI_CMBATT is not set=0A= # CONFIG_ACPI_THERMAL is not set=0A= CONFIG_APM=3Dy=0A= # CONFIG_APM_IGNORE_USER_SUSPEND is not set=0A= # CONFIG_APM_DO_ENABLE is not set=0A= # CONFIG_APM_CPU_IDLE is not set=0A= # CONFIG_APM_DISPLAY_BLANK is not set=0A= # CONFIG_APM_RTC_IS_GMT is not set=0A= # CONFIG_APM_ALLOW_INTS is not set=0A= # CONFIG_APM_REAL_MODE_POWER_OFF is not set=0A= =0A= #=0A= # Memory Technology Devices (MTD)=0A= #=0A= # CONFIG_MTD is not set=0A= =0A= #=0A= # Parallel port support=0A= #=0A= CONFIG_PARPORT=3Dm=0A= CONFIG_PARPORT_PC=3Dm=0A= CONFIG_PARPORT_PC_CML1=3Dm=0A= # CONFIG_PARPORT_SERIAL is not set=0A= CONFIG_PARPORT_PC_FIFO=3Dy=0A= # CONFIG_PARPORT_PC_SUPERIO is not set=0A= # CONFIG_PARPORT_AMIGA is not set=0A= # CONFIG_PARPORT_MFC3 is not set=0A= # CONFIG_PARPORT_ATARI is not set=0A= # CONFIG_PARPORT_GSC is not set=0A= # CONFIG_PARPORT_SUNBPP is not set=0A= # CONFIG_PARPORT_OTHER is not set=0A= CONFIG_PARPORT_1284=3Dy=0A= =0A= #=0A= # Plug and Play configuration=0A= #=0A= CONFIG_PNP=3Dy=0A= CONFIG_ISAPNP=3Dy=0A= =0A= #=0A= # Block devices=0A= #=0A= CONFIG_BLK_DEV_FD=3Dy=0A= # CONFIG_BLK_DEV_XD is not set=0A= # CONFIG_PARIDE is not set=0A= # CONFIG_BLK_CPQ_DA is not set=0A= # CONFIG_BLK_CPQ_CISS_DA is not set=0A= # CONFIG_CISS_SCSI_TAPE is not set=0A= # CONFIG_BLK_DEV_DAC960 is not set=0A= CONFIG_BLK_DEV_LOOP=3Dy=0A= # CONFIG_BLK_DEV_NBD is not set=0A= CONFIG_BLK_DEV_RAM=3Dy=0A= CONFIG_BLK_DEV_RAM_SIZE=3D4096=0A= CONFIG_BLK_DEV_INITRD=3Dy=0A= =0A= #=0A= # Multi-device support (RAID and LVM)=0A= #=0A= # CONFIG_MD is not set=0A= # CONFIG_BLK_DEV_MD is not set=0A= # CONFIG_MD_LINEAR is not set=0A= # CONFIG_MD_RAID0 is not set=0A= # CONFIG_MD_RAID1 is not set=0A= # CONFIG_MD_RAID5 is not set=0A= # CONFIG_MD_MULTIPATH is not set=0A= # CONFIG_BLK_DEV_LVM is not set=0A= =0A= #=0A= # Networking options=0A= #=0A= CONFIG_PACKET=3Dy=0A= # CONFIG_PACKET_MMAP is not set=0A= # CONFIG_NETLINK_DEV is not set=0A= # CONFIG_NETFILTER is not set=0A= # CONFIG_FILTER is not set=0A= CONFIG_UNIX=3Dy=0A= CONFIG_INET=3Dy=0A= CONFIG_IP_MULTICAST=3Dy=0A= # CONFIG_IP_ADVANCED_ROUTER is not set=0A= # CONFIG_IP_PNP is not set=0A= # CONFIG_NET_IPIP is not set=0A= # CONFIG_NET_IPGRE is not set=0A= # CONFIG_IP_MROUTE is not set=0A= # CONFIG_ARPD is not set=0A= # CONFIG_INET_ECN is not set=0A= # CONFIG_SYN_COOKIES is not set=0A= # CONFIG_IPV6 is not set=0A= # CONFIG_KHTTPD is not set=0A= # CONFIG_ATM is not set=0A= # CONFIG_VLAN_8021Q is not set=0A= # CONFIG_IPX is not set=0A= CONFIG_ATALK=3Dy=0A= # CONFIG_DECNET is not set=0A= # CONFIG_BRIDGE is not set=0A= # CONFIG_X25 is not set=0A= # CONFIG_LAPB is not set=0A= # CONFIG_LLC is not set=0A= # CONFIG_NET_DIVERT is not set=0A= # CONFIG_ECONET is not set=0A= # CONFIG_WAN_ROUTER is not set=0A= # CONFIG_NET_FASTROUTE is not set=0A= # CONFIG_NET_HW_FLOWCONTROL is not set=0A= =0A= #=0A= # QoS and/or fair queueing=0A= #=0A= # CONFIG_NET_SCHED is not set=0A= =0A= #=0A= # Network testing=0A= #=0A= # CONFIG_NET_PKTGEN is not set=0A= =0A= #=0A= # Telephony Support=0A= #=0A= # CONFIG_PHONE is not set=0A= # CONFIG_PHONE_IXJ is not set=0A= # CONFIG_PHONE_IXJ_PCMCIA is not set=0A= =0A= #=0A= # ATA/IDE/MFM/RLL support=0A= #=0A= CONFIG_IDE=3Dy=0A= =0A= #=0A= # IDE, ATA and ATAPI Block devices=0A= #=0A= CONFIG_BLK_DEV_IDE=3Dy=0A= # CONFIG_BLK_DEV_HD_IDE is not set=0A= # CONFIG_BLK_DEV_HD is not set=0A= CONFIG_BLK_DEV_IDEDISK=3Dy=0A= CONFIG_IDEDISK_MULTI_MODE=3Dy=0A= # CONFIG_IDEDISK_STROKE is not set=0A= # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set=0A= # CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set=0A= # CONFIG_BLK_DEV_IDEDISK_IBM is not set=0A= # CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set=0A= # CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set=0A= # CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set=0A= # CONFIG_BLK_DEV_IDEDISK_WD is not set=0A= # CONFIG_BLK_DEV_COMMERIAL is not set=0A= # CONFIG_BLK_DEV_TIVO is not set=0A= # CONFIG_BLK_DEV_IDECS is not set=0A= CONFIG_BLK_DEV_IDECD=3Dy=0A= CONFIG_BLK_DEV_IDETAPE=3Dy=0A= CONFIG_BLK_DEV_IDEFLOPPY=3Dy=0A= CONFIG_BLK_DEV_IDESCSI=3Dm=0A= # CONFIG_IDE_TASK_IOCTL is not set=0A= CONFIG_BLK_DEV_CMD640=3Dy=0A= # CONFIG_BLK_DEV_CMD640_ENHANCED is not set=0A= # CONFIG_BLK_DEV_ISAPNP is not set=0A= CONFIG_BLK_DEV_RZ1000=3Dy=0A= CONFIG_BLK_DEV_IDEPCI=3Dy=0A= CONFIG_IDEPCI_SHARE_IRQ=3Dy=0A= CONFIG_BLK_DEV_IDEDMA_PCI=3Dy=0A= # CONFIG_BLK_DEV_OFFBOARD is not set=0A= # CONFIG_BLK_DEV_IDEDMA_FORCED is not set=0A= CONFIG_IDEDMA_PCI_AUTO=3Dy=0A= # CONFIG_IDEDMA_ONLYDISK is not set=0A= CONFIG_BLK_DEV_IDEDMA=3Dy=0A= # CONFIG_IDEDMA_PCI_WIP is not set=0A= # CONFIG_BLK_DEV_IDEDMA_TIMEOUT is not set=0A= # CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set=0A= CONFIG_BLK_DEV_ADMA=3Dy=0A= # CONFIG_BLK_DEV_AEC62XX is not set=0A= # CONFIG_AEC62XX_TUNING is not set=0A= # CONFIG_BLK_DEV_ALI15X3 is not set=0A= # CONFIG_WDC_ALI15X3 is not set=0A= # CONFIG_BLK_DEV_AMD74XX is not set=0A= # CONFIG_AMD74XX_OVERRIDE is not set=0A= # CONFIG_BLK_DEV_CMD64X is not set=0A= # CONFIG_BLK_DEV_CMD680 is not set=0A= # CONFIG_BLK_DEV_CY82C693 is not set=0A= # CONFIG_BLK_DEV_CS5530 is not set=0A= # CONFIG_BLK_DEV_HPT34X is not set=0A= # CONFIG_HPT34X_AUTODMA is not set=0A= # CONFIG_BLK_DEV_HPT366 is not set=0A= # CONFIG_BLK_DEV_PIIX is not set=0A= # CONFIG_PIIX_TUNING is not set=0A= # CONFIG_BLK_DEV_NS87415 is not set=0A= # CONFIG_BLK_DEV_OPTI621 is not set=0A= # CONFIG_BLK_DEV_PDC202XX is not set=0A= # CONFIG_PDC202XX_BURST is not set=0A= # CONFIG_PDC202XX_FORCE is not set=0A= # CONFIG_BLK_DEV_SVWKS is not set=0A= CONFIG_BLK_DEV_SIS5513=3Dy=0A= # CONFIG_BLK_DEV_SLC90E66 is not set=0A= # CONFIG_BLK_DEV_TRM290 is not set=0A= # CONFIG_BLK_DEV_VIA82CXXX is not set=0A= # CONFIG_IDE_CHIPSETS is not set=0A= CONFIG_IDEDMA_AUTO=3Dy=0A= # CONFIG_IDEDMA_IVB is not set=0A= # CONFIG_DMA_NONPCI is not set=0A= CONFIG_BLK_DEV_IDE_MODES=3Dy=0A= # CONFIG_BLK_DEV_ATARAID is not set=0A= # CONFIG_BLK_DEV_ATARAID_PDC is not set=0A= # CONFIG_BLK_DEV_ATARAID_HPT is not set=0A= =0A= #=0A= # SCSI support=0A= #=0A= CONFIG_SCSI=3Dm=0A= CONFIG_BLK_DEV_SD=3Dm=0A= CONFIG_SD_EXTRA_DEVS=3D40=0A= CONFIG_CHR_DEV_ST=3Dm=0A= # CONFIG_CHR_DEV_OSST is not set=0A= CONFIG_BLK_DEV_SR=3Dm=0A= CONFIG_BLK_DEV_SR_VENDOR=3Dy=0A= CONFIG_SR_EXTRA_DEVS=3D2=0A= CONFIG_CHR_DEV_SG=3Dm=0A= CONFIG_SCSI_DEBUG_QUEUES=3Dy=0A= CONFIG_SCSI_MULTI_LUN=3Dy=0A= CONFIG_SCSI_CONSTANTS=3Dy=0A= # CONFIG_SCSI_LOGGING is not set=0A= =0A= #=0A= # SCSI low-level drivers=0A= #=0A= # CONFIG_BLK_DEV_3W_XXXX_RAID is not set=0A= # CONFIG_SCSI_7000FASST is not set=0A= # CONFIG_SCSI_ACARD is not set=0A= # CONFIG_SCSI_AHA152X is not set=0A= # CONFIG_SCSI_AHA1542 is not set=0A= # CONFIG_SCSI_AHA1740 is not set=0A= # CONFIG_SCSI_AACRAID is not set=0A= # CONFIG_SCSI_AIC7XXX is not set=0A= # CONFIG_SCSI_AIC7XXX_OLD is not set=0A= # CONFIG_SCSI_DPT_I2O is not set=0A= # CONFIG_SCSI_ADVANSYS is not set=0A= # CONFIG_SCSI_IN2000 is not set=0A= # CONFIG_SCSI_AM53C974 is not set=0A= # CONFIG_SCSI_MEGARAID is not set=0A= # CONFIG_SCSI_BUSLOGIC is not set=0A= # CONFIG_SCSI_CPQFCTS is not set=0A= # CONFIG_SCSI_DMX3191D is not set=0A= # CONFIG_SCSI_DTC3280 is not set=0A= # CONFIG_SCSI_EATA is not set=0A= # CONFIG_SCSI_EATA_DMA is not set=0A= # CONFIG_SCSI_EATA_PIO is not set=0A= # CONFIG_SCSI_FUTURE_DOMAIN is not set=0A= # CONFIG_SCSI_GDTH is not set=0A= # CONFIG_SCSI_GENERIC_NCR5380 is not set=0A= # CONFIG_SCSI_IPS is not set=0A= # CONFIG_SCSI_INITIO is not set=0A= # CONFIG_SCSI_INIA100 is not set=0A= # CONFIG_SCSI_PPA is not set=0A= CONFIG_SCSI_IMM=3Dm=0A= # CONFIG_SCSI_IZIP_EPP16 is not set=0A= # CONFIG_SCSI_IZIP_SLOW_CTR is not set=0A= # CONFIG_SCSI_NCR53C406A is not set=0A= # CONFIG_SCSI_NCR53C7xx is not set=0A= # CONFIG_SCSI_SYM53C8XX_2 is not set=0A= CONFIG_SCSI_NCR53C8XX=3Dm=0A= CONFIG_SCSI_SYM53C8XX=3Dm=0A= CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=3D4=0A= CONFIG_SCSI_NCR53C8XX_MAX_TAGS=3D32=0A= CONFIG_SCSI_NCR53C8XX_SYNC=3D20=0A= # CONFIG_SCSI_NCR53C8XX_PROFILE is not set=0A= # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set=0A= # CONFIG_SCSI_NCR53C8XX_PQS_PDS is not set=0A= # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set=0A= # CONFIG_SCSI_PAS16 is not set=0A= # CONFIG_SCSI_PCI2000 is not set=0A= # CONFIG_SCSI_PCI2220I is not set=0A= # CONFIG_SCSI_PSI240I is not set=0A= # CONFIG_SCSI_QLOGIC_FAS is not set=0A= # CONFIG_SCSI_QLOGIC_ISP is not set=0A= # CONFIG_SCSI_QLOGIC_FC is not set=0A= # CONFIG_SCSI_QLOGIC_1280 is not set=0A= # CONFIG_SCSI_SEAGATE is not set=0A= # CONFIG_SCSI_SIM710 is not set=0A= # CONFIG_SCSI_SYM53C416 is not set=0A= # CONFIG_SCSI_DC390T is not set=0A= # CONFIG_SCSI_T128 is not set=0A= # CONFIG_SCSI_U14_34F is not set=0A= # CONFIG_SCSI_ULTRASTOR is not set=0A= # CONFIG_SCSI_DEBUG is not set=0A= =0A= #=0A= # Fusion MPT device support=0A= #=0A= # CONFIG_FUSION is not set=0A= # CONFIG_FUSION_BOOT is not set=0A= # CONFIG_FUSION_ISENSE is not set=0A= # CONFIG_FUSION_CTL is not set=0A= # CONFIG_FUSION_LAN is not set=0A= =0A= #=0A= # IEEE 1394 (FireWire) support (EXPERIMENTAL)=0A= #=0A= # CONFIG_IEEE1394 is not set=0A= =0A= #=0A= # I2O device support=0A= #=0A= # CONFIG_I2O is not set=0A= # CONFIG_I2O_PCI is not set=0A= # CONFIG_I2O_BLOCK is not set=0A= # CONFIG_I2O_LAN is not set=0A= # CONFIG_I2O_SCSI is not set=0A= # CONFIG_I2O_PROC is not set=0A= =0A= #=0A= # Network device support=0A= #=0A= CONFIG_NETDEVICES=3Dy=0A= =0A= #=0A= # ARCnet devices=0A= #=0A= # CONFIG_ARCNET is not set=0A= =0A= #=0A= # Appletalk devices=0A= #=0A= # CONFIG_APPLETALK is not set=0A= # CONFIG_LTPC is not set=0A= # CONFIG_COPS is not set=0A= # CONFIG_IPDDP is not set=0A= CONFIG_DUMMY=3Dm=0A= # CONFIG_BONDING is not set=0A= # CONFIG_EQUALIZER is not set=0A= # CONFIG_TUN is not set=0A= # CONFIG_ETHERTAP is not set=0A= # CONFIG_NET_SB1000 is not set=0A= =0A= #=0A= # Ethernet (10 or 100Mbit)=0A= #=0A= CONFIG_NET_ETHERNET=3Dy=0A= # CONFIG_SUNLANCE is not set=0A= # CONFIG_HAPPYMEAL is not set=0A= # CONFIG_SUNBMAC is not set=0A= # CONFIG_SUNQE is not set=0A= # CONFIG_SUNGEM is not set=0A= CONFIG_NET_VENDOR_3COM=3Dy=0A= # CONFIG_EL1 is not set=0A= # CONFIG_EL2 is not set=0A= # CONFIG_ELPLUS is not set=0A= # CONFIG_EL16 is not set=0A= # CONFIG_EL3 is not set=0A= # CONFIG_3C515 is not set=0A= # CONFIG_ELMC is not set=0A= # CONFIG_ELMC_II is not set=0A= CONFIG_VORTEX=3Dm=0A= # CONFIG_LANCE is not set=0A= # CONFIG_NET_VENDOR_SMC is not set=0A= # CONFIG_NET_VENDOR_RACAL is not set=0A= # CONFIG_AT1700 is not set=0A= # CONFIG_DEPCA is not set=0A= # CONFIG_HP100 is not set=0A= # CONFIG_NET_ISA is not set=0A= CONFIG_NET_PCI=3Dy=0A= # CONFIG_PCNET32 is not set=0A= # CONFIG_ADAPTEC_STARFIRE is not set=0A= # CONFIG_AC3200 is not set=0A= # CONFIG_APRICOT is not set=0A= # CONFIG_CS89x0 is not set=0A= # CONFIG_TULIP is not set=0A= # CONFIG_TC35815 is not set=0A= # CONFIG_DE4X5 is not set=0A= # CONFIG_DGRS is not set=0A= CONFIG_DM9102=3Dm=0A= # CONFIG_EEPRO100 is not set=0A= # CONFIG_LNE390 is not set=0A= # CONFIG_FEALNX is not set=0A= # CONFIG_NATSEMI is not set=0A= CONFIG_NE2K_PCI=3Dm=0A= # CONFIG_NE3210 is not set=0A= # CONFIG_ES3210 is not set=0A= CONFIG_8139CP=3Dm=0A= CONFIG_8139TOO=3Dm=0A= # CONFIG_8139TOO_PIO is not set=0A= # CONFIG_8139TOO_TUNE_TWISTER is not set=0A= # CONFIG_8139TOO_8129 is not set=0A= # CONFIG_8139_NEW_RX_RESET is not set=0A= CONFIG_SIS900=3Dm=0A= # CONFIG_EPIC100 is not set=0A= # CONFIG_SUNDANCE is not set=0A= # CONFIG_TLAN is not set=0A= # CONFIG_VIA_RHINE is not set=0A= # CONFIG_VIA_RHINE_MMIO is not set=0A= # CONFIG_WINBOND_840 is not set=0A= # CONFIG_NET_POCKET is not set=0A= =0A= #=0A= # Ethernet (1000 Mbit)=0A= #=0A= # CONFIG_ACENIC is not set=0A= # CONFIG_DL2K is not set=0A= # CONFIG_MYRI_SBUS is not set=0A= # CONFIG_NS83820 is not set=0A= # CONFIG_HAMACHI is not set=0A= # CONFIG_YELLOWFIN is not set=0A= # CONFIG_SK98LIN is not set=0A= # CONFIG_TIGON3 is not set=0A= # CONFIG_FDDI is not set=0A= # CONFIG_HIPPI is not set=0A= # CONFIG_PLIP is not set=0A= CONFIG_PPP=3Dm=0A= # CONFIG_PPP_MULTILINK is not set=0A= # CONFIG_PPP_FILTER is not set=0A= CONFIG_PPP_ASYNC=3Dm=0A= # CONFIG_PPP_SYNC_TTY is not set=0A= CONFIG_PPP_DEFLATE=3Dm=0A= CONFIG_PPP_BSDCOMP=3Dm=0A= # CONFIG_PPPOE is not set=0A= # CONFIG_SLIP is not set=0A= =0A= #=0A= # Wireless LAN (non-hamradio)=0A= #=0A= # CONFIG_NET_RADIO is not set=0A= =0A= #=0A= # Token Ring devices=0A= #=0A= # CONFIG_TR is not set=0A= # CONFIG_NET_FC is not set=0A= # CONFIG_RCPCI is not set=0A= # CONFIG_SHAPER is not set=0A= =0A= #=0A= # Wan interfaces=0A= #=0A= # CONFIG_WAN is not set=0A= =0A= #=0A= # Amateur Radio support=0A= #=0A= # CONFIG_HAMRADIO is not set=0A= =0A= #=0A= # IrDA (infrared) support=0A= #=0A= # CONFIG_IRDA is not set=0A= =0A= #=0A= # ISDN subsystem=0A= #=0A= # CONFIG_ISDN is not set=0A= =0A= #=0A= # Old CD-ROM drivers (not SCSI, not IDE)=0A= #=0A= # CONFIG_CD_NO_IDESCSI is not set=0A= =0A= #=0A= # Input core support=0A= #=0A= CONFIG_INPUT=3Dm=0A= CONFIG_INPUT_KEYBDEV=3Dm=0A= CONFIG_INPUT_MOUSEDEV=3Dm=0A= CONFIG_INPUT_MOUSEDEV_SCREEN_X=3D1024=0A= CONFIG_INPUT_MOUSEDEV_SCREEN_Y=3D768=0A= # CONFIG_INPUT_JOYDEV is not set=0A= # CONFIG_INPUT_EVDEV is not set=0A= =0A= #=0A= # Character devices=0A= #=0A= CONFIG_VT=3Dy=0A= CONFIG_VT_CONSOLE=3Dy=0A= CONFIG_SERIAL=3Dy=0A= # CONFIG_SERIAL_CONSOLE is not set=0A= # CONFIG_SERIAL_ACPI is not set=0A= # CONFIG_SERIAL_EXTENDED is not set=0A= # CONFIG_SERIAL_NONSTANDARD is not set=0A= CONFIG_UNIX98_PTYS=3Dy=0A= CONFIG_UNIX98_PTY_COUNT=3D256=0A= CONFIG_PRINTER=3Dm=0A= # CONFIG_LP_CONSOLE is not set=0A= # CONFIG_PPDEV is not set=0A= =0A= #=0A= # I2C support=0A= #=0A= # CONFIG_I2C is not set=0A= =0A= #=0A= # Mice=0A= #=0A= # CONFIG_BUSMOUSE is not set=0A= CONFIG_MOUSE=3Dy=0A= CONFIG_PSMOUSE=3Dy=0A= # CONFIG_82C710_MOUSE is not set=0A= # CONFIG_PC110_PAD is not set=0A= # CONFIG_MK712_MOUSE is not set=0A= =0A= #=0A= # Joysticks=0A= #=0A= # CONFIG_INPUT_GAMEPORT is not set=0A= # CONFIG_INPUT_NS558 is not set=0A= # CONFIG_INPUT_LIGHTNING is not set=0A= # CONFIG_INPUT_PCIGAME is not set=0A= # CONFIG_INPUT_CS461X is not set=0A= # CONFIG_INPUT_EMU10K1 is not set=0A= # CONFIG_INPUT_SERIO is not set=0A= # CONFIG_INPUT_SERPORT is not set=0A= # CONFIG_INPUT_ANALOG is not set=0A= # CONFIG_INPUT_A3D is not set=0A= # CONFIG_INPUT_ADI is not set=0A= # CONFIG_INPUT_COBRA is not set=0A= # CONFIG_INPUT_GF2K is not set=0A= # CONFIG_INPUT_GRIP is not set=0A= # CONFIG_INPUT_INTERACT is not set=0A= # CONFIG_INPUT_TMDC is not set=0A= # CONFIG_INPUT_SIDEWINDER is not set=0A= # CONFIG_INPUT_IFORCE_USB is not set=0A= # CONFIG_INPUT_IFORCE_232 is not set=0A= # CONFIG_INPUT_WARRIOR is not set=0A= # CONFIG_INPUT_MAGELLAN is not set=0A= # CONFIG_INPUT_SPACEORB is not set=0A= # CONFIG_INPUT_SPACEBALL is not set=0A= # CONFIG_INPUT_STINGER is not set=0A= # CONFIG_INPUT_DB9 is not set=0A= # CONFIG_INPUT_GAMECON is not set=0A= # CONFIG_INPUT_TURBOGRAFX is not set=0A= # CONFIG_QIC02_TAPE is not set=0A= =0A= #=0A= # Watchdog Cards=0A= #=0A= # CONFIG_WATCHDOG is not set=0A= # CONFIG_AMD_RNG is not set=0A= # CONFIG_INTEL_RNG is not set=0A= # CONFIG_NVRAM is not set=0A= # CONFIG_RTC is not set=0A= # CONFIG_DTLK is not set=0A= # CONFIG_R3964 is not set=0A= # CONFIG_APPLICOM is not set=0A= # CONFIG_SONYPI is not set=0A= =0A= #=0A= # Ftape, the floppy tape device driver=0A= #=0A= # CONFIG_FTAPE is not set=0A= CONFIG_AGP=3Dy=0A= CONFIG_AGP_INTEL=3Dy=0A= CONFIG_AGP_I810=3Dy=0A= CONFIG_AGP_VIA=3Dy=0A= CONFIG_AGP_AMD=3Dy=0A= CONFIG_AGP_SIS=3Dy=0A= CONFIG_AGP_ALI=3Dy=0A= # CONFIG_AGP_SWORKS is not set=0A= CONFIG_DRM=3Dy=0A= # CONFIG_DRM_OLD is not set=0A= CONFIG_DRM_NEW=3Dy=0A= # CONFIG_DRM_TDFX is not set=0A= # CONFIG_DRM_R128 is not set=0A= # CONFIG_DRM_RADEON is not set=0A= # CONFIG_DRM_I810 is not set=0A= # CONFIG_DRM_MGA is not set=0A= # CONFIG_DRM_SIS is not set=0A= =0A= #=0A= # Multimedia devices=0A= #=0A= # CONFIG_VIDEO_DEV is not set=0A= =0A= #=0A= # File systems=0A= #=0A= CONFIG_QUOTA=3Dy=0A= # CONFIG_AUTOFS_FS is not set=0A= CONFIG_AUTOFS4_FS=3Dy=0A= CONFIG_REISERFS_FS=3Dy=0A= # CONFIG_REISERFS_CHECK is not set=0A= CONFIG_REISERFS_PROC_INFO=3Dy=0A= # CONFIG_ADFS_FS is not set=0A= # CONFIG_ADFS_FS_RW is not set=0A= # CONFIG_AFFS_FS is not set=0A= CONFIG_HFS_FS=3Dm=0A= # CONFIG_BFS_FS is not set=0A= CONFIG_EXT3_FS=3Dm=0A= CONFIG_JBD=3Dm=0A= # CONFIG_JBD_DEBUG is not set=0A= CONFIG_FAT_FS=3Dm=0A= CONFIG_MSDOS_FS=3Dm=0A= # CONFIG_UMSDOS_FS is not set=0A= CONFIG_VFAT_FS=3Dm=0A= # CONFIG_EFS_FS is not set=0A= # CONFIG_JFFS_FS is not set=0A= # CONFIG_JFFS2_FS is not set=0A= # CONFIG_CRAMFS is not set=0A= CONFIG_TMPFS=3Dy=0A= CONFIG_RAMFS=3Dy=0A= CONFIG_ISO9660_FS=3Dy=0A= CONFIG_JOLIET=3Dy=0A= CONFIG_ZISOFS=3Dy=0A= # CONFIG_MINIX_FS is not set=0A= # CONFIG_VXFS_FS is not set=0A= # CONFIG_NTFS_FS is not set=0A= # CONFIG_NTFS_RW is not set=0A= # CONFIG_HPFS_FS is not set=0A= CONFIG_PROC_FS=3Dy=0A= # CONFIG_DEVFS_FS is not set=0A= # CONFIG_DEVFS_MOUNT is not set=0A= # CONFIG_DEVFS_DEBUG is not set=0A= CONFIG_DEVPTS_FS=3Dy=0A= # CONFIG_QNX4FS_FS is not set=0A= # CONFIG_QNX4FS_RW is not set=0A= # CONFIG_ROMFS_FS is not set=0A= CONFIG_EXT2_FS=3Dy=0A= # CONFIG_SYSV_FS is not set=0A= # CONFIG_UDF_FS is not set=0A= # CONFIG_UDF_RW is not set=0A= # CONFIG_UFS_FS is not set=0A= # CONFIG_UFS_FS_WRITE is not set=0A= =0A= #=0A= # Network File Systems=0A= #=0A= # CONFIG_CODA_FS is not set=0A= # CONFIG_INTERMEZZO_FS is not set=0A= CONFIG_NFS_FS=3Dy=0A= # CONFIG_NFS_V3 is not set=0A= # CONFIG_ROOT_NFS is not set=0A= CONFIG_NFSD=3Dy=0A= # CONFIG_NFSD_V3 is not set=0A= CONFIG_SUNRPC=3Dy=0A= CONFIG_LOCKD=3Dy=0A= CONFIG_SMB_FS=3Dm=0A= CONFIG_SMB_NLS_DEFAULT=3Dy=0A= CONFIG_SMB_NLS_REMOTE=3D"cp437"=0A= CONFIG_NCP_FS=3Dm=0A= # CONFIG_NCPFS_PACKET_SIGNING is not set=0A= # CONFIG_NCPFS_IOCTL_LOCKING is not set=0A= # CONFIG_NCPFS_STRONG is not set=0A= # CONFIG_NCPFS_NFS_NS is not set=0A= # CONFIG_NCPFS_OS2_NS is not set=0A= # CONFIG_NCPFS_SMALLDOS is not set=0A= # CONFIG_NCPFS_NLS is not set=0A= # CONFIG_NCPFS_EXTRAS is not set=0A= CONFIG_ZISOFS_FS=3Dy=0A= CONFIG_ZLIB_FS_INFLATE=3Dy=0A= =0A= #=0A= # Partition Types=0A= #=0A= # CONFIG_PARTITION_ADVANCED is not set=0A= CONFIG_MSDOS_PARTITION=3Dy=0A= CONFIG_SMB_NLS=3Dy=0A= CONFIG_NLS=3Dy=0A= =0A= #=0A= # Native Language Support=0A= #=0A= CONFIG_NLS_DEFAULT=3D"iso8859-1"=0A= CONFIG_NLS_CODEPAGE_437=3Dm=0A= # CONFIG_NLS_CODEPAGE_737 is not set=0A= # CONFIG_NLS_CODEPAGE_775 is not set=0A= # CONFIG_NLS_CODEPAGE_850 is not set=0A= # CONFIG_NLS_CODEPAGE_852 is not set=0A= # CONFIG_NLS_CODEPAGE_855 is not set=0A= # CONFIG_NLS_CODEPAGE_857 is not set=0A= # CONFIG_NLS_CODEPAGE_860 is not set=0A= # CONFIG_NLS_CODEPAGE_861 is not set=0A= # CONFIG_NLS_CODEPAGE_862 is not set=0A= # CONFIG_NLS_CODEPAGE_863 is not set=0A= # CONFIG_NLS_CODEPAGE_864 is not set=0A= # CONFIG_NLS_CODEPAGE_865 is not set=0A= # CONFIG_NLS_CODEPAGE_866 is not set=0A= # CONFIG_NLS_CODEPAGE_869 is not set=0A= # CONFIG_NLS_CODEPAGE_936 is not set=0A= # CONFIG_NLS_CODEPAGE_950 is not set=0A= # CONFIG_NLS_CODEPAGE_932 is not set=0A= # CONFIG_NLS_CODEPAGE_949 is not set=0A= # CONFIG_NLS_CODEPAGE_874 is not set=0A= # CONFIG_NLS_ISO8859_8 is not set=0A= # CONFIG_NLS_CODEPAGE_1250 is not set=0A= # CONFIG_NLS_CODEPAGE_1251 is not set=0A= CONFIG_NLS_ISO8859_1=3Dm=0A= # CONFIG_NLS_ISO8859_2 is not set=0A= # CONFIG_NLS_ISO8859_3 is not set=0A= # CONFIG_NLS_ISO8859_4 is not set=0A= # CONFIG_NLS_ISO8859_5 is not set=0A= # CONFIG_NLS_ISO8859_6 is not set=0A= # CONFIG_NLS_ISO8859_7 is not set=0A= # CONFIG_NLS_ISO8859_9 is not set=0A= # CONFIG_NLS_ISO8859_13 is not set=0A= # CONFIG_NLS_ISO8859_14 is not set=0A= # CONFIG_NLS_ISO8859_15 is not set=0A= # CONFIG_NLS_KOI8_R is not set=0A= # CONFIG_NLS_KOI8_U is not set=0A= # CONFIG_NLS_UTF8 is not set=0A= =0A= #=0A= # Console drivers=0A= #=0A= CONFIG_VGA_CONSOLE=3Dy=0A= CONFIG_VIDEO_SELECT=3Dy=0A= # CONFIG_MDA_CONSOLE is not set=0A= =0A= #=0A= # Frame-buffer support=0A= #=0A= # CONFIG_FB is not set=0A= =0A= #=0A= # Sound=0A= #=0A= # CONFIG_SOUND is not set=0A= =0A= #=0A= # USB support=0A= #=0A= CONFIG_USB=3Dy=0A= # CONFIG_USB_DEBUG is not set=0A= # CONFIG_USB_DEVICEFS is not set=0A= # CONFIG_USB_BANDWIDTH is not set=0A= # CONFIG_USB_LONG_TIMEOUT is not set=0A= # CONFIG_USB_EHCI_HCD is not set=0A= CONFIG_USB_UHCI_ALT=3Dy=0A= CONFIG_USB_OHCI=3Dy=0A= # CONFIG_USB_AUDIO is not set=0A= # CONFIG_USB_EMI26 is not set=0A= CONFIG_USB_BLUETOOTH=3Dm=0A= CONFIG_USB_STORAGE=3Dm=0A= # CONFIG_USB_STORAGE_DEBUG is not set=0A= # CONFIG_USB_STORAGE_DATAFAB is not set=0A= # CONFIG_USB_STORAGE_FREECOM is not set=0A= # CONFIG_USB_STORAGE_ISD200 is not set=0A= # CONFIG_USB_STORAGE_DPCM is not set=0A= CONFIG_USB_STORAGE_HP8200e=3Dy=0A= # CONFIG_USB_STORAGE_SDDR09 is not set=0A= # CONFIG_USB_STORAGE_JUMPSHOT is not set=0A= CONFIG_USB_ACM=3Dm=0A= CONFIG_USB_PRINTER=3Dm=0A= # CONFIG_USB_HID is not set=0A= # CONFIG_USB_HIDDEV is not set=0A= # CONFIG_USB_KBD is not set=0A= # CONFIG_USB_MOUSE is not set=0A= # CONFIG_USB_WACOM is not set=0A= # CONFIG_USB_DC2XX is not set=0A= # CONFIG_USB_MDC800 is not set=0A= # CONFIG_USB_SCANNER is not set=0A= # CONFIG_USB_MICROTEK is not set=0A= # CONFIG_USB_HPUSBSCSI is not set=0A= # CONFIG_USB_PEGASUS is not set=0A= # CONFIG_USB_KAWETH is not set=0A= # CONFIG_USB_CATC is not set=0A= # CONFIG_USB_CDCETHER is not set=0A= # CONFIG_USB_USBNET is not set=0A= # CONFIG_USB_USS720 is not set=0A= =0A= #=0A= # USB Serial Converter support=0A= #=0A= # CONFIG_USB_SERIAL is not set=0A= # CONFIG_USB_SERIAL_GENERIC is not set=0A= # CONFIG_USB_SERIAL_BELKIN is not set=0A= # CONFIG_USB_SERIAL_WHITEHEAT is not set=0A= # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set=0A= # CONFIG_USB_SERIAL_EMPEG is not set=0A= # CONFIG_USB_SERIAL_FTDI_SIO is not set=0A= # CONFIG_USB_SERIAL_VISOR is not set=0A= # CONFIG_USB_SERIAL_IPAQ is not set=0A= # CONFIG_USB_SERIAL_IR is not set=0A= # CONFIG_USB_SERIAL_EDGEPORT is not set=0A= # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set=0A= # CONFIG_USB_SERIAL_KEYSPAN is not set=0A= # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set=0A= # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set=0A= # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set=0A= # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set=0A= # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set=0A= # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set=0A= # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set=0A= # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set=0A= # CONFIG_USB_SERIAL_MCT_U232 is not set=0A= # CONFIG_USB_SERIAL_KLSI is not set=0A= # CONFIG_USB_SERIAL_PL2303 is not set=0A= # CONFIG_USB_SERIAL_CYBERJACK is not set=0A= # CONFIG_USB_SERIAL_XIRCOM is not set=0A= # CONFIG_USB_SERIAL_OMNINET is not set=0A= # CONFIG_USB_RIO500 is not set=0A= # CONFIG_USB_AUERSWALD is not set=0A= =0A= #=0A= # Bluetooth support=0A= #=0A= # CONFIG_BLUEZ is not set=0A= =0A= #=0A= # Kernel hacking=0A= #=0A= # CONFIG_DEBUG_KERNEL is not set=0A= ------=_NextPart_000_000B_01C1DBC7.C58DBD60--