Linux version 2.2.14-12smp (root@porky.devel.redhat.com) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 SMP Tue Apr 25 12:58:06 EDT 2000 mapped APIC to ffffe000 (00295000) Detected 500979898 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 499.71 BogoMIPS Memory: 256428k/261056k available (1120k kernel code, 424k reserved, 3008k data, 76k init, 0k bigmem) Dentry hash table entries: 262144 (order 9, 2048k) Buffer cache hash table entries: 262144 (order 8, 1024k) Page cache hash table entries: 65536 (order 6, 256k) VFS: Diskquotas version dquot_6.4.0 initialized Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au) per-CPU timeslice cutoff: 25.04 usecs. CPU0: Intel Celeron (Mendocino) stepping 05 SMP motherboard not detected. Using dummy APIC emulation. PCI: PCI BIOS revision 2.10 entry at 0xfb0f0 PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 262144 bhash 65536) Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2421 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio hda: ST34321A, ATA DISK drive hdb: SAMSUNG CD-ROM SC-152C, ATAPI CDROM drive hdc: SAMSUNG WA32163A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: ST34321A, 4103MB w/128kB Cache, CHS=523/255/63 hdc: SAMSUNG WA32163A, 2062MB w/128kB Cache, CHS=4190/16/63 hdb: ATAPI 52X CD-ROM drive, 128kB Cache Uniform CDROM driver Revision: 2.56 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed raid5: MMX detected, trying high-speed MMX checksum routines pII_mmx : 1122.426 MB/sec p5_mmx : 1171.956 MB/sec 8regs : 860.298 MB/sec 32regs : 505.587 MB/sec using fastest function: p5_mmx (1171.956 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda:hda: set_multmode: status=0x51 { DriveReady SeekComplete Error } hda: set_multmode: error=0x04 { DriveStatusError } hda1 hda2 < hda5 hda6 > hdc: hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 hdc9 > autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 76k freed Adding Swap: 514040k swap-space (priority -1)