Here are the outputs. Without H1 there is no 7101 device; with H1 there is a 7101 device. Enrico ----- Original Message ----- From: "Martin Mares" To: "Enrico Bartky" Cc: Sent: Saturday, January 15, 2005 1:35 PM Subject: Re: lspci != scanpci !? > Hello! > > > Now the scanpci command shows the M7101 BUT lspci and /proc/pci, > > /proc/bus/pci, /sys/bus/pci NOT. What can I do? Is there anything like a > > "update_pci" command? > > What does `lspci -vv -M' and `lspci -vv -M -H1' print? > > (Please Cc to me, I usually read LKML in large batches.) > > Have a nice fortnight > -- > Martin `MJ' Mares http://atrey.karlin.mff.cuni.cz/~mj/ > Faculty of Math and Physics, Charles University, Prague, Czech Rep., Earth > Air conditioned environment -- Do not open Windows.