From: "Doug Smythies" <dsmythies@telus.net>
To: "'Zak'" <zakbrightonknight@gmail.com>, <linux-pm@vger.kernel.org>,
"'Rafael J. Wysocki'" <rafael@kernel.org>,
"'Srinivas Pandruvada'" <srinivas.pandruvada@linux.intel.com>
Cc: "'Len Brown'" <lenb@kernel.org>,
"'Viresh Kumar'" <viresh.kumar@linaro.org>,
<linux-kernel@vger.kernel.org>, <stable@vger.kernel.org>,
"Doug Smythies" <dsmythies@telus.net>
Subject: RE: [PATCH] cpufreq: intel_pstate: Restore P-state request on resume without HWP
Date: Tue, 27 Oct 2026 09:36:55 -0700 [thread overview]
Message-ID: <001101dd6631$6167dbd0$24379370$@telus.net> (raw)
In-Reply-To: <20261027143725.3763827-1-zakbrightonknight@gmail.com>
On 2026.10.27 07:37 Zak Brighton Knight wrote:
> From: Zak Brighton Knight <zakbrightonknight@gmail.com>
>
> On a ThinkPad T520 with an i7-3840QM (Ivy Bridge) running coreboot,
> the CPUs stop using turbo after every suspend to RAM when intel_pstate
> is in passive mode with the performance governor: they stay at the
> 2.8 GHz base frequency instead of boosting up to 3.8 GHz, until the
> policy limits change or the system is rebooted.
>
> During resume, the firmware sets each CPU's P-state request register,
> MSR_IA32_PERF_CTL, to the base ratio (28), and the kernel never writes
> the requested turbo ratio (38) again. Without hardware-managed
> P-states (HWP), intel_pstate caches the last P-state it wrote and
> skips writes that would not change it. In passive mode the cpufreq
> core also skips requests for the frequency it believes is already set
> (policy->cur), because intel_cpufreq sets CPUFREQ_NEED_UPDATE_LIMITS
> only with HWP. Neither cached value is updated across suspend and
> resume, so as long as the governor keeps requesting the same P-state,
> as the performance governor always does, the register is never
> rewritten. Governors that change the request often, such as
> schedutil, mostly hide the problem.
>
> Fix this by writing the cached P-state back to the register in
> intel_pstate_resume() when HWP is not used, as is already done for
> the HWP request when it is.
>
> The problem was found and root-caused, and this patch was drafted, with
> the help of an AI coding assistant (Claude, by Anthropic) during a
> performance review of the machine described above.
>
> Fixes: 001c76f05b01 ("cpufreq: intel_pstate: Generic governors support")
> Cc: stable@vger.kernel.org
> Signed-off-by: Zak Brighton Knight <zakbrightonknight@gmail.com>
> ---
> Tested on the T520 (i7-3840QM, no HWP, coreboot 24.08 with SeaBIOS)
> with v7.3 plus this patch and a temporary module parameter, not part
> of this patch, to turn the fix off. intel_pstate.c is the same in
> v7.3 and in the base commit below.
>
> Each row is one suspend to RAM and resume (rtcwake -m mem -s 25).
> "Request" is the P-state read back from PERF_CTL on all eight CPUs
> 5 and 17 seconds after resume; "clock" is the measured speed of a
> single-threaded busy loop. Before every suspend, all CPUs requested
> 38 and the clock was about 3.8 GHz.
>
> mode governor fix request after resume clock
> passive performance on 38 on all CPUs 3.8 GHz
> passive performance off 28 on all CPUs 2.8 GHz
> active performance off 38 on all CPUs 3.8 GHz
> active performance on 38 on all CPUs 3.8 GHz
>
> The passive-mode failure was also reproduced twice on Fedora's 7.2.11
> kernel. In active mode the request was back at 38 after resume even
> without the fix, so on this machine the fix only makes a difference in
> passive mode, the default without HWP.
>
> Not tested: systems with HWP (their code path is unchanged, only
> restructured), other machines and firmware, and suspend-to-idle. The
> patch adds no warnings with W=1; sparse was not run. The tests were
> scripted and run by the same AI assistant.
>
> drivers/cpufreq/intel_pstate.c | 16 +++++++++++++---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
> index 17158cb..53db91a 100644
> --- a/drivers/cpufreq/intel_pstate.c
> +++ b/drivers/cpufreq/intel_pstate.c
> @@ -1371,6 +1371,7 @@ static void set_power_ctl_ee_state(bool input)
> }
>
> static void intel_pstate_hwp_enable(struct cpudata *cpudata);
> +static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate);
>
> static void intel_pstate_hwp_reenable(struct cpudata *cpu)
> {
> @@ -1404,11 +1405,20 @@ static int intel_pstate_resume(struct cpufreq_policy *policy)
> else if (power_ctl_ee_state == POWER_CTL_EE_DISABLE)
> set_power_ctl_ee_state(false);
>
> - if (cpu->suspended && hwp_active) {
> + if (cpu->suspended) {
> mutex_lock(&intel_pstate_limits_lock);
>
> - /* Re-enable HWP, because "online" has not done that. */
> - intel_pstate_hwp_reenable(cpu);
> + if (hwp_active) {
> + /* Re-enable HWP, because "online" has not done that. */
> + intel_pstate_hwp_reenable(cpu);
> + } else {
> + /*
> + * PERF_CTL may have been changed by the platform
> + * firmware, but it is only written when the requested
> + * P-state changes, so restore it explicitly.
> + */
> + intel_pstate_set_pstate(cpu, cpu->pstate.current_pstate);
> + }
>
> mutex_unlock(&intel_pstate_limits_lock);
> }
>
> base-commit: d135ab453a7400a34930bdda1ef4bdc8acfac80e
> --
> 2.56.0
I confirm your findings and tested your proposed patch. It all worked fine.
I had not seen Rafaels's reply about a possible race condition until now.
Test computer: i5-10600K, 6 cores, 12 CPUs, HWP disabled.
... Doug
next prev parent reply other threads:[~2026-10-27 16:36 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-27 14:37 Zak
2026-10-27 15:56 ` Rafael J. Wysocki (Intel)
2026-10-27 16:36 ` Doug Smythies [this message]
2026-10-27 20:32 ` Rafael J. Wysocki (Intel)
2026-10-27 21:46 ` Doug Smythies
2026-10-28 9:46 ` [PATCH v2] " Zak Brighton Knight
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001101dd6631$6167dbd0$24379370$@telus.net' \
--to=dsmythies@telus.net \
--cc=lenb@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=srinivas.pandruvada@linux.intel.com \
--cc=stable@vger.kernel.org \
--cc=viresh.kumar@linaro.org \
--cc=zakbrightonknight@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®