mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Steven Cole <scole@lanl.gov>
To: linux-kernel@vger.kernel.org
Subject: 2.4.0-test12-pre4 + cs46xx + KDE 2.0 = frozen system
Date: Mon, 4 Dec 2000 14:27:10 -0700	[thread overview]
Message-ID: <00120414271000.01254@spc.esa.lanl.gov> (raw)

If I have the cs46xx driver compiled either as a module or into
the kernel, then 2.4.0-test12-pre4 locks up when KDE 2.0
is started.

The problem with dummy.o in 2.4.0-test12-pre4 allowed me
to find the possible source of this lock-up which I have been
seeing recently (since test11-ac2) while starting up KDE 2.0.

This morning, I tried out 2.4.0-test12-pre4, and KDE 2.0
started up (and there was much rejoicing). Of course, I
saw the error when I tried to make modules, but I thought
could live without sound for one bootup.

Then I applied Mohammad A. Haque's small patch to
linux/include/linux/module.h, recompiled , and the system
froze again at the same spot ("Loading the panel")
while starting up KDE 2.0.

I found that if I said N for the cs46xx sound driver, then I
get a 2.4.0-test12-pre4 kernel that will run KDE 2.0,
sans sound :(.

I can run GNOME with 2.4.0-test12-pre4 with
cs46xx compiled as a module or compiled into the kernel, 
and everything works just fine.

Here is some additional information from /var/log/messages:
2.4.0-test10 works OK with KDE 2.0 and sound.

For 2.4.0-test12-pre4:

Crystal 4280/461x + AC97 Audio, version 0.14, 13:39:25 Dec  4 2000
cs461x: Card found at 0xf8ffe000 and 0xf8e00000, IRQ 18
cs461x: Unknown card (FFFFFFFF:FFFFFFFF) at 0xf8ffe000/0xf8e00000, IRQ 18
ac97_codec: AC97 Audio codec, id: 0x4352:0x5914 (Unknown)

For 2.4.0-test10:

Crystal 4280/461x + AC97 Audio, version 0.09, 15:31:37 Nov  1 2000
cs461x: Card found at 0xf8ffe000 and 0xf8e00000, IRQ 18
cs461x: Unknown card (1028:0096) at 0xf8ffe000/0xf8e00000, IRQ 18
ac97_codec: AC97 Audio codec, id: 0x4352:0x5914 (Unknown)

The hardware is a DELL 420 dual P-III.
The base linux distro is Linux-Mandrake 7.2.
Filesystems are ReiserFS, running reiserfs-3.6.19 for test12
and reiserfs-3.6.18 for test10.

Note: The ReiserFS folks looked at this, but could
not reproduce this on another smp machine. That
was before I noticed the connection with cs46xx.

When I say the system freezes, I mean it completely locks up, and
ALT-SYSRQ-<whatevercommand> does not do a thing.  The magic
key combo gives the expected result before freezup.

Thanks in advance for any help,

Steven
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/

             reply	other threads:[~2000-12-04 21:57 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2000-12-04 21:27 Steven Cole [this message]
2000-12-04 21:55 ` Keith Owens
2000-12-04 22:47 ` Roger Larsson
2000-12-04 23:22 ` Alan Cox
2000-12-04 23:29   ` Alan Cox
2000-12-05 17:16     ` Steven Cole
2000-12-05 22:02       ` Alan Cox
2000-12-05 22:47         ` Steven Cole
2000-12-06  1:00           ` Alan Cox
2000-12-06 14:55             ` Steven Cole
2000-12-06 16:04             ` Steven Cole
2000-12-06 18:40               ` Nils Faerber
2000-12-07 13:28               ` Alan Cox
2000-12-07 14:27                 ` Steven Cole
2000-12-05  1:42 Steven Cole

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=00120414271000.01254@spc.esa.lanl.gov \
    --to=scole@lanl.gov \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®