From: "Robert B. Easter" <reaster@comptechnews.com>
To: Daniel Sangenberg <daniel@datanova.se>, linux-kernel@vger.kernel.org
Subject: Re: 2.2.17 + ide patches + 61gb ibm disc = problem
Date: Tue, 5 Dec 2000 12:25:32 -0500 [thread overview]
Message-ID: <00120512253218.00289@comptechnews> (raw)
In-Reply-To: <5.0.1.4.2.20001205170724.00b30458@mail.datanova.se>
In-Reply-To: <5.0.1.4.2.20001205170724.00b30458@mail.datanova.se>
On Tuesday 05 December 2000 11:15, Daniel Sangenberg wrote:
> Hi!
>
> I have a problem with 2.2.17 + the latest ide patches and 2 * 61 gb ibm ide
> discs, the discs are connected as slave on a two channels (onboard ide
> channels on a asus p2b (i440BX Chipset)), there is nohing else connected on
> the ide interface and the jumper settings are identical.
>
> dmesg output:
>
> Uniform Multi-Platform E-IDE driver Revision: 6.30
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> PIIX4: IDE controller on PCI bus 00 dev 21
> PIIX4: chipset revision 1
> PIIX4: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:pio, hdb:DMA
> ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA
> hdb: IBM-DTLA-307060, ATA DISK drive
> hdd: IBM-DTLA-307060, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ide1 at 0x170-0x177,0x376 on irq 15
> hdb: IBM-DTLA-307060, 58644MB w/1916kB Cache, CHS=7476/255/63, UDMA(33)
> hdd: IBM-DTLA-307060, 58644MB w/1916kB Cache, CHS=119150/16/63, UDMA(33)
>
> hdd1 [events: 00000001](write) hdd1's sb offset: 60051456
> hdb1 [events: 00000001](write) hdb1's sb offset: 60050816
>
I don't understand why you have set them to be slaves when they are the only
drives on the ports. Shouldn't you be setting the jumpers on both drives
into the Single Drive (default) settings? I always thought the Master and
Slave positions are to be used only when connecting two drives on one port.
hda and hdc should be the devices.
--
-------- Robert B. Easter reaster@comptechnews.com ---------
- CompTechNews Message Board http://www.comptechnews.com/ -
- CompTechServ Tech Services http://www.comptechserv.com/ -
---------- http://www.comptechnews.com/~reaster/ ------------
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2000-12-05 17:49 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-12-05 16:15 Daniel Sangenberg
2000-12-05 17:25 ` Robert B. Easter [this message]
2000-12-05 17:24 ` Andre Hedrick
2000-12-05 18:12 ` Guest section DW
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00120512253218.00289@comptechnews \
--to=reaster@comptechnews.com \
--cc=daniel@datanova.se \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®