From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751616AbVJSWZd (ORCPT ); Wed, 19 Oct 2005 18:25:33 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1750967AbVJSWZd (ORCPT ); Wed, 19 Oct 2005 18:25:33 -0400 Received: from 82-68-65-126.dsl.in-addr.zen.co.uk ([82.68.65.126]:5761 "EHLO www.drunkenpirates.co.uk") by vger.kernel.org with ESMTP id S1751615AbVJSWZc (ORCPT ); Wed, 19 Oct 2005 18:25:32 -0400 Message-ID: <001601c5d4fc$06ea9090$6401a8c0@CMR> From: "Chris Rutherford" To: "Dominik Brodowski" , "Linux Kernel" Subject: Re: pci bridge 0000:00:1c.1 compaq nc8230 laptop Date: Wed, 19 Oct 2005 23:25:35 +0100 X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2900.2180 X-MIMEOLE: Produced By Microsoft MimeOLE V6.00.2900.2180 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hi All, Just a quick update re the pci bridge 0000:00:1c.1 problem. I have tried to 2.6.13.4 without the APCI and Yentra modules. It boots fine with APCI and Yentra disabled. TPM still not found on nc8230, but one step closer. I have now tried up to 2.6.13.4 using the default kernel config and it still crashes at boot. i.e. bridge 0000:00:1c.1 then halt. Linux version 2.6.13.4 (root@localhost.localdomain) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #2 Thu Oct 20 07:50:16 BST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable) BIOS-e820: 000000001ffd0000 - 000000001ffefc00 (reserved) BIOS-e820: 000000001ffefc00 - 000000001fffb000 (ACPI NVS) BIOS-e820: 000000001fffb000 - 0000000020000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved) BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved) BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. On node 0 totalpages: 131024 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126928 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. Allocating PCI resources starting at 20000000 (gap: 20000000:c0000000) Built 1 zonelists Kernel command line: ro root=LABEL=/ rhgb quiet Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1729.151 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 515356k/524096k available (1928k kernel code, 8128k reserved, 608k data, 160k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3464.53 BogoMIPS (lpj=6929079) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000 CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000180 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00000000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. mtrr: v2.0 (20020519) CPU: Intel(R) Pentium(R) M processor 1.73GHz stepping 08 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 197k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32 PCI: Using configuration type 1 Linux Plug and Play Support v0.97 (c) Adam Belay usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Using IRQ router PIIX/ICH [8086/2641] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:01.0 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 10 for device 0000:00:01.0 PCI: Sharing IRQ 10 with 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:01:00.0 PCI: Sharing IRQ 10 with 0000:10:00.0 PCI: IRQ 0 for device 0000:00:1c.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 11 for device 0000:00:1c.1 PCI: Sharing IRQ 11 with 0000:00:1d.1 PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1 PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: c8800000-c8bfffff PREFETCH window: c0000000-c7ffffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: c8000000-c83fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bus 3, cardbus bridge: 0000:02:06.0 IO window: 00004000-00004fff IO window: 00005000-00005fff PREFETCH window: 20000000-21ffffff MEM window: 22000000-23ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-5fff MEM window: c8400000-c87fffff PREFETCH window: 20000000-21ffffff PCI: Found IRQ 10 for device 0000:00:01.0 PCI: Sharing IRQ 10 with 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:01:00.0 PCI: Sharing IRQ 10 with 0000:10:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Found IRQ 10 for device 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:00:01.0 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:01:00.0 PCI: Sharing IRQ 10 with 0000:10:00.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Device 0000:00:1c.1 not available because of resource collisions PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 PCI: Found IRQ 11 for device 0000:02:06.0 PCI: Sharing IRQ 11 with 0000:00:1d.2 PCI: Sharing IRQ 11 with 0000:02:06.5 apm: BIOS not found. audit: initializing netlink socket (disabled) audit(1129795129.180:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PCI: Found IRQ 10 for device 0000:00:01.0 PCI: Sharing IRQ 10 with 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:01:00.0 PCI: Sharing IRQ 10 with 0000:10:00.0 PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] PCI: Found IRQ 10 for device 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:00:01.0 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:01:00.0 PCI: Sharing IRQ 10 with 0000:10:00.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Allocate Port Service[pcie02] PCI: Device 0000:00:1c.1 not available because of resource collisions isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: AGP aperture is 256M @ 0x0 [drm] Initialized drm 1.0.0 20040925 PNP: No PS/2 controller found. Probing ports directly. i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled PCI: Found IRQ 10 for device 0000:00:1e.3 PCI: Sharing IRQ 10 with 0000:02:06.2 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH6: IDE controller at PCI slot 0000:00:1f.1 PCI: Found IRQ 10 for device 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:00:01.0 PCI: Sharing IRQ 10 with 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:01:00.0 PCI: Sharing IRQ 10 with 0000:10:00.0 ICH6: chipset revision 3 ICH6: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3580-0x3587, BIOS settings: hda:DMA, hdb:DMA Probing IDE interface ide0... hda: HTS541040G9AT00, ATA DISK drive hdb: UJDA765aDVD/CDRW, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/7539KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 hdb: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbmon: debugfs is not available usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.38 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 5, 131072 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 160k freed Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa44793/0x300000 serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad on isa0060/serio4 SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks PCI: Found IRQ 10 for device 0000:00:1d.7 PCI: Sharing IRQ 10 with 0000:00:1d.0 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: irq 10, io mem 0xc8c00000 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v2.3 PCI: Found IRQ 10 for device 0000:00:1d.0 PCI: Sharing IRQ 10 with 0000:00:1d.7 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 10, io base 0x00003000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.1 PCI: Sharing IRQ 11 with 0000:00:1c.1 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00003020 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Found IRQ 11 for device 0000:00:1d.2 PCI: Sharing IRQ 11 with 0000:02:06.0 PCI: Sharing IRQ 11 with 0000:02:06.5 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00003040 usb 1-2: new high speed USB device using ehci_hcd and address 2 input: PS/2 Generic Mouse on synaptics-pt/serio0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usb-storage USB Mass Storage support registered. EXT3 FS on hda2, internal journal device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com cdrom: open failed. Adding 1024120k swap on /dev/hda3. Priority:-1 extents:1 IA-32 Microcode Update Driver: v1.14 microcode: No new microcode data for CPU0 Vendor: Lexar Model: JumpDrive I.D. Rev: 1000 Type: Direct-Access ANSI SCSI revision: 00 usb-storage: device scan complete SCSI device sda: 502784 512-byte hdwr sectors (257 MB) sda: Write Protect is off sda: Mode Sense: 43 00 00 00 sda: assuming drive cache: write through SCSI device sda: 502784 512-byte hdwr sectors (257 MB) sda: Write Protect is off sda: Mode Sense: 43 00 00 00 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found tg3.c:v3.37 (August 25, 2005) PCI: Found IRQ 10 for device 0000:10:00.0 PCI: Sharing IRQ 10 with 0000:00:01.0 PCI: Sharing IRQ 10 with 0000:00:1c.0 PCI: Sharing IRQ 10 with 0000:00:1f.1 PCI: Sharing IRQ 10 with 0000:01:00.0 PCI: Setting latency timer of device 0000:10:00.0 to 64 eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:12:79:c2:9c:36 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (4094 buckets, 32752 max) - 212 bytes per conntrack lp: driver loaded but no devices found NET: Registered protocol family 10 Disabled Privacy Extensions on device c03432c0(lo) IPv6 over IPv4 tunneling driver usb 1-2: USB disconnect, address 2 Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found usb 2-1: new full speed USB device using uhci_hcd and address 2 scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found Vendor: Wincan Model: HARD DRIVE DISK Rev: 1.04 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 128000 512-byte hdwr sectors (66 MB) sda: Write Protect is off sda: Mode Sense: 43 00 00 00 sda: assuming drive cache: write through SCSI device sda: 128000 512-byte hdwr sectors (66 MB) sda: Write Protect is off sda: Mode Sense: 43 00 00 00 sda: assuming drive cache: write through sda: sda1 Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0 usb-storage: device scan complete tpm_infineon: No Infineon TPM found! Sorry! tpm_infineon: unable to pci_register_driver minor 224 tpm_infineon: No Infineon TPM found! Sorry! tpm_infineon: unable to pci_register_driver minor 224 I'd solve this problem but my Linux kernel coding skills are aren't yet up to the challenge, give me a parallel port problem anyday (especially a simple one). Thanks Chris R www.hackinghardware.com