From: "Vladimír Třebický" <druid@mail.cz>
To: <linux-kernel@vger.kernel.org>
Subject: ALi M1543 on P200
Date: Fri, 13 Sep 2002 21:12:13 +0200 [thread overview]
Message-ID: <001701c25b59$7756a820$4500a8c0@cybernet.cz> (raw)
I cannot use DMA on my new disks. UDMA is enabled in BIOS in mode UDMA 2. It
doesn't work even in auto mode. ide0=dma doesn't work either. hdparm -d 1
/dev/hda causes "operation not permitted"
/dev/hda:
Model=ST320413A, FwRev=3.39, SerialNo=7ED1R0TR
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=512kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=39102336
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: device does not report version: 1 2 3 4 5
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller at PCI slot 00:0b.0
PCI: Assigned IRQ 10 for device 00:0b.0
ALI15X3: chipset revision 32
ALI15X3: not 100% native mode: will probe irqs later
ALI15X3: simplex device with no drives: DMA disabled
ide0: ALI15X3 Bus-Master DMA disabled (BIOS)
ALI15X3: simplex device with no drives: DMA disabled
ide1: ALI15X3 Bus-Master DMA disabled (BIOS)
hda: ST320413A, ATA DISK drive
hdb: WDC WD300BB-00AUA1, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: host protected area => 1
hda: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=2434/255/63
hdb: host protected area => 1
hdb: 58633344 sectors (30020 MB) w/2048KiB Cache, CHS=3649/255/63
next reply other threads:[~2002-09-13 19:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-09-13 19:12 Vladimír Třebický [this message]
2002-09-13 19:18 ` Tomas Szepe
2002-09-13 23:51 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001701c25b59$7756a820$4500a8c0@cybernet.cz' \
--to=druid@mail.cz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®