From: Jingoo Han <jg1.han@samsung.com>
To: "'Andrew Morton'" <akpm@linux-foundation.org>,
"'LKML'" <linux-kernel@vger.kernel.org>
Cc: "'Richard Purdie'" <rpurdie@rpsys.net>,
"'Kristoffer Ericson'" <kristoffer.ericson@gmail.com>,
"'Jingoo Han'" <jg1.han@samsung.com>
Subject: [PATCH v2 5/7] backlight: jornada720: use pr_err/info instead of printk
Date: Wed, 16 May 2012 14:16:59 +0900 [thread overview]
Message-ID: <002601cd3323$1ebbf9c0$5c33ed40$%han@samsung.com> (raw)
In-Reply-To:
This patch uses pr_err/info instead of printk to allow dynamic debugging.
The pr_fmt prefix for pr_ macros is used. It also fixes checkpatch
warnings as below:
WARNING: Prefer pr_err(... to printk(KERN_ERR, ...
WARNING: Prefer pr_info(... to printk(KERN_INFO, ...
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
drivers/video/backlight/jornada720_bl.c | 14 ++++++++------
drivers/video/backlight/jornada720_lcd.c | 8 +++++---
2 files changed, 13 insertions(+), 9 deletions(-)
diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c
index 2f8af5d..bcaa7b5 100644
--- a/drivers/video/backlight/jornada720_bl.c
+++ b/drivers/video/backlight/jornada720_bl.c
@@ -9,6 +9,8 @@
*
*/
+#define pr_fmt(fmt) "jornada720_bl: " fmt
+
#include <linux/backlight.h>
#include <linux/device.h>
#include <linux/fb.h>
@@ -38,7 +40,7 @@ static int jornada_bl_get_brightness(struct backlight_device *bd)
ret = jornada_ssp_byte(GETBRIGHTNESS);
if (jornada_ssp_byte(GETBRIGHTNESS) != TXDUMMY) {
- printk(KERN_ERR "bl : get brightness timeout\n");
+ pr_err("get brightness timeout\n");
jornada_ssp_end();
return -ETIMEDOUT;
} else /* exchange txdummy for value */
@@ -59,7 +61,7 @@ static int jornada_bl_update_status(struct backlight_device *bd)
if ((bd->props.power != FB_BLANK_UNBLANK) || (bd->props.fb_blank != FB_BLANK_UNBLANK)) {
ret = jornada_ssp_byte(BRIGHTNESSOFF);
if (ret != TXDUMMY) {
- printk(KERN_INFO "bl : brightness off timeout\n");
+ pr_info("brightness off timeout\n");
/* turn off backlight */
PPSR &= ~PPC_LDD1;
PPDR |= PPC_LDD1;
@@ -70,7 +72,7 @@ static int jornada_bl_update_status(struct backlight_device *bd)
/* send command to our mcu */
if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) {
- printk(KERN_INFO "bl : failed to set brightness\n");
+ pr_info("failed to set brightness\n");
ret = -ETIMEDOUT;
goto out;
}
@@ -81,7 +83,7 @@ static int jornada_bl_update_status(struct backlight_device *bd)
but due to physical layout it is equal to 0, so we simply
invert the value (MAX VALUE - NEW VALUE). */
if (jornada_ssp_byte(BL_MAX_BRIGHT - bd->props.brightness) != TXDUMMY) {
- printk(KERN_ERR "bl : set brightness failed\n");
+ pr_err("set brightness failed\n");
ret = -ETIMEDOUT;
}
@@ -113,7 +115,7 @@ static int jornada_bl_probe(struct platform_device *pdev)
if (IS_ERR(bd)) {
ret = PTR_ERR(bd);
- printk(KERN_ERR "bl : failed to register device, err=%x\n", ret);
+ pr_err("failed to register device, err=%x\n", ret);
return ret;
}
@@ -125,7 +127,7 @@ static int jornada_bl_probe(struct platform_device *pdev)
jornada_bl_update_status(bd);
platform_set_drvdata(pdev, bd);
- printk(KERN_INFO "HP Jornada 700 series backlight driver\n");
+ pr_info("HP Jornada 700 series backlight driver\n");
return 0;
}
diff --git a/drivers/video/backlight/jornada720_lcd.c b/drivers/video/backlight/jornada720_lcd.c
index 22d231a..a7782cd 100644
--- a/drivers/video/backlight/jornada720_lcd.c
+++ b/drivers/video/backlight/jornada720_lcd.c
@@ -9,6 +9,8 @@
*
*/
+#define pr_fmt(fmt) "jornada720_lcd: " fmt
+
#include <linux/device.h>
#include <linux/fb.h>
#include <linux/kernel.h>
@@ -44,7 +46,7 @@ static int jornada_lcd_get_contrast(struct lcd_device *dev)
jornada_ssp_start();
if (jornada_ssp_byte(GETCONTRAST) != TXDUMMY) {
- printk(KERN_ERR "lcd: get contrast failed\n");
+ pr_err("get contrast failed\n");
jornada_ssp_end();
return -ETIMEDOUT;
} else {
@@ -65,7 +67,7 @@ static int jornada_lcd_set_contrast(struct lcd_device *dev, int value)
/* push the new value */
if (jornada_ssp_byte(value) != TXDUMMY) {
- printk(KERN_ERR "lcd : set contrast failed\n");
+ pr_err("set contrast failed\n");
jornada_ssp_end();
return -ETIMEDOUT;
}
@@ -103,7 +105,7 @@ static int jornada_lcd_probe(struct platform_device *pdev)
if (IS_ERR(lcd_device)) {
ret = PTR_ERR(lcd_device);
- printk(KERN_ERR "lcd : failed to register device\n");
+ pr_err("failed to register device\n");
return ret;
}
--
1.7.1
next reply other threads:[~2012-05-16 5:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-16 5:16 Jingoo Han [this message]
-- strict thread matches above, loose matches on Subject: below --
2012-05-16 5:12 Jingoo Han
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='002601cd3323$1ebbf9c0$5c33ed40$%han@samsung.com' \
--to=jg1.han@samsung.com \
--cc=akpm@linux-foundation.org \
--cc=kristoffer.ericson@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®