From: Jingoo Han <jg1.han@samsung.com>
To: "'Vivek Gautam'" <gautam.vivek@samsung.com>,
stern@rowland.harvard.edu, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
devicetree-discuss@lists.ozlabs.org
Cc: l.majewski@samsung.com, a.kesavan@samsung.com,
prashanth.g@samsung.com, kmpark@infradead.org, joshi@samsung.com,
olofj@google.com, jy0922.shim@samsung.com,
thomas.abraham@linaro.org, sshtylyov@mvista.com,
"'Jingoo Han'" <jg1.han@samsung.com>
Subject: Re: [PATCH 2/3 v3] USB: ehci-s5p: Add support for device tree
Date: Mon, 16 Jul 2012 15:39:32 +0900 [thread overview]
Message-ID: <002801cd631d$c23d4890$46b7d9b0$%han@samsung.com> (raw)
In-Reply-To: <1342418138-6192-3-git-send-email-gautam.vivek@samsung.com>
On Monday, July 16, 2012 2:56 PM, Vivek Gautam wrote:
>
> This patch adds support to parse probe data for
> ehci driver for exynos using device tree
>
> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
>
> diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
> index 13c179f..37d84cf 100644
> --- a/drivers/usb/host/ehci-s5p.c
> +++ b/drivers/usb/host/ehci-s5p.c
> @@ -13,6 +13,7 @@
> */
>
> #include <linux/clk.h>
> +#include <linux/of.h>
> #include <linux/platform_device.h>
> #include <plat/ehci.h>
> #include <plat/usb-phy.h>
> @@ -63,6 +64,8 @@ static const struct hc_driver s5p_ehci_hc_driver = {
> .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
> };
>
> +static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
> +
> static int __devinit s5p_ehci_probe(struct platform_device *pdev)
> {
> struct s5p_ehci_platdata *pdata;
> @@ -79,6 +82,16 @@ static int __devinit s5p_ehci_probe(struct platform_device *pdev)
> return -EINVAL;
> }
>
> + /*
> + * Right now device-tree probed devices don't get dma_mask set.
> + * Since shared usb code relies on it, set it here for now.
> + * Once we move to full device tree support this will vanish off.
> + */
> + if (!pdev->dev.dma_mask)
> + pdev->dev.dma_mask = &ehci_s5p_dma_mask;
> + if (!pdev->dev.coherent_dma_mask)
> + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
> +
> s5p_ehci = devm_kzalloc(&pdev->dev, sizeof(struct s5p_ehci_hcd),
> GFP_KERNEL);
> if (!s5p_ehci)
> @@ -233,6 +246,14 @@ static const struct dev_pm_ops s5p_ehci_pm_ops = {
> .resume = s5p_ehci_resume,
> };
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id exynos_ehci_match[] = {
> + { .compatible = "samsung,exynos-ehci" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, exynos_ehci_match);
> +#endif
> +
> static struct platform_driver s5p_ehci_driver = {
> .probe = s5p_ehci_probe,
> .remove = __devexit_p(s5p_ehci_remove),
> @@ -241,6 +262,7 @@ static struct platform_driver s5p_ehci_driver = {
> .name = "s5p-ehci",
> .owner = THIS_MODULE,
> .pm = &s5p_ehci_pm_ops,
> + .of_match_table = of_match_ptr(exynos_ehci_match),
> }
> };
>
> --
> 1.7.0.4
next prev parent reply other threads:[~2012-07-16 6:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-16 5:55 [PATCH 0/3 v3] USB: host: Add Device tree support for ohci-exynos & ehci-s5p Vivek Gautam
2012-07-16 5:55 ` [PATCH 1/3 v3] USB: ohci-exynos: Add support for device tree Vivek Gautam
2012-07-16 6:38 ` Jingoo Han
2012-07-16 14:07 ` Alan Stern
2012-07-16 5:55 ` [PATCH 2/3 v3] USB: ehci-s5p: " Vivek Gautam
2012-07-16 6:39 ` Jingoo Han [this message]
2012-07-16 14:08 ` Alan Stern
2012-07-16 5:55 ` [PATCH 3/3 v3] USB: ehci-s5p: Add vbus setup function to the s5p ehci glue layer Vivek Gautam
2012-07-16 6:40 ` Jingoo Han
2012-07-16 14:10 ` Alan Stern
2012-07-17 0:16 ` [PATCH 0/3 v3] USB: host: Add Device tree support for ohci-exynos & ehci-s5p Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='002801cd631d$c23d4890$46b7d9b0$%han@samsung.com' \
--to=jg1.han@samsung.com \
--cc=a.kesavan@samsung.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=gautam.vivek@samsung.com \
--cc=joshi@samsung.com \
--cc=jy0922.shim@samsung.com \
--cc=kmpark@infradead.org \
--cc=l.majewski@samsung.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=olofj@google.com \
--cc=prashanth.g@samsung.com \
--cc=sshtylyov@mvista.com \
--cc=stern@rowland.harvard.edu \
--cc=thomas.abraham@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome