From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Sat, 28 Apr 2001 22:44:30 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Sat, 28 Apr 2001 22:44:22 -0400 Received: from mail2.rdc2.on.home.com ([24.9.0.41]:60371 "EHLO mail2.rdc2.on.home.com") by vger.kernel.org with ESMTP id ; Sat, 28 Apr 2001 22:44:08 -0400 Message-ID: <002f01c0d056$3c89c2c0$0f00a8c0@mydomain.org> From: "Jeff Muizelaar" To: Subject: ASIX AX88140 doesn't work under 2.4.x kernel Date: Sat, 28 Apr 2001 22:43:53 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.50.4522.1200 X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4522.1200 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org I am having dificulty getting an ASIX AX88140 ethernet card to work under the 2.4.3 kernel. It works perfectly under a 2.2.19 kernel and is found properly, but when trying the 2.4.3 kernel it fails with the message: tulip: eth1: MMIO region (0x0@0x0) unavailable, aborting tulip-diag still detects the card, here is the results of it under 2.4.3: tulip-diag.c:v2.06 1/8/2001 Donald Becker (becker@scyld.com) http://www.scyld.com/diag/index.html Index #1: Found a Macronix 98715 PMAC adapter at 0xbc00. Port selection is 10mpbs-serial 100baseTx scrambler, full-duplex. Transmit started, Receive started, full-duplex. The Rx process state is 'Waiting for packets'. The Tx process state is 'Idle'. The transmit unit is set to store-and-forward. Index #2: Found a ASIX AX88140 adapter at 0xc000. Port selection is MII, half-duplex. Transmit stopped, Receive stopped, half-duplex. The Rx process state is 'Stopped'. The Tx process state is 'Stopped'. The transmit threshold is 128. The MAC/filter registers are 18cac000 00007f8a 80000000 00000000. Use '-a' or '-aa' to show device registers, '-e' to show EEPROM contents, -ee for parsed contents, or '-m' or '-mm' to show MII management registers.