From: "Jani Forssell" <jani.forssell@viasys.com>
To: <alan@lxorguk.ukuu.org.uk>
Cc: "Ville Herva" <ville.herva@viasys.com>, <linux-kernel@vger.kernel.org>
Subject: 2.2.21pre2 VIA IDE lockup during boot
Date: Thu, 10 Jan 2002 12:03:23 +0200 [thread overview]
Message-ID: <003001c199be$0a4981b0$b71c64c2@viasys.com> (raw)
We have a Abit KT7 raid with all the drives attached to the onboard VIA IDE
controller. It gets stuck during boot with 2.2.21pre2, but works with
2.4.18pre2. Here's a bit of the boot sequence:
[snip]
hda: Samsung SV8004H, ATA DISK drive
hdb: CDROM 52X/AKH, ATAPI CDROM drive
hdc: Samsung SV8004H, ATA DISK drive
ide0: ...
ide1: ...
[stops here]
And it doesn't get past this point. SysRq->ShowPc shows this:
EIP 0010:[<c0109b1c>] EFLAGS: 00000202
EAX: 000001C0 EBX: 0000000e ECX: 0000000e EDX: c024c000
ESI: 0000000e EDI: c026f2e0 EBP: c026f2a0 DS: 0018 ES: 0018
CR0: 8005003b CR2: 00000000 CR3: 00101000
According to System.map, c0109b1c would be in disable_irq().
c0109ab8 T disable_irq_nosync
c0109af8 T disable_irq
c0109b24 T enable_irq
Some combinations do work, however:
-Both HDDs on channel 0 (hda, hdb) (works)
-Both HDDs on channel 0 (hda, hdb) and CDROM on channel 1 (hdc) (works)
-Both HDDs on different channels (hda, hdc) (works)
lspci:
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0305 (rev 02)
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device 8305
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super] (rev 22)
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo] (rev 10)
00:07.2 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
00:07.3 USB Controller: VIA Technologies, Inc. VT82C586B USB (rev 10)
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
00:0b.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
00:13.0 Unknown mass storage controller: Triones Technologies, Inc. HPT366
(rev 03)
01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev
03)
---
Jani Forssell
jani.forssell@viasys.com
next reply other threads:[~2002-01-10 10:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-01-10 10:03 Jani Forssell [this message]
2002-01-15 11:30 Jani Forssell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='003001c199be$0a4981b0$b71c64c2@viasys.com' \
--to=jani.forssell@viasys.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=ville.herva@viasys.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®