Re: [PATCH v2] thermal: Fix a NULL pointer dereference

[Daniel Lezcano <daniel.lezcano@linaro.org>]

On 07/09/2021 21:01, Subbaraman Narayanamurthy wrote:
> of_parse_thermal_zones() parses the thermal-zones node and registers a
> thermal_zone device for each subnode. However, if a thermal zone is
> consuming a thermal sensor and that thermal sensor device hasn't probed
> yet, an attempt to set trip_point_*_temp for that thermal zone device
> can cause a NULL pointer dereference. Fix it.
> 
>  console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp
>  ...
>  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020

I'm still not convinced by the changes.

Could please tell the commit-id where this is happening and give the
procedure to reproduce the bug ?


>  ...
>  Call trace:
>   of_thermal_set_trip_temp+0x40/0xc4
>   trip_point_temp_store+0xc0/0x1dc
>   dev_attr_store+0x38/0x88
>   sysfs_kf_write+0x64/0xc0
>   kernfs_fop_write_iter+0x108/0x1d0
>   vfs_write+0x2f4/0x368
>   ksys_write+0x7c/0xec
>   __arm64_sys_write+0x20/0x30
>   el0_svc_common.llvm.7279915941325364641+0xbc/0x1bc
>   do_el0_svc+0x28/0xa0
>   el0_svc+0x14/0x24
>   el0_sync_handler+0x88/0xec
>   el0_sync+0x1c0/0x200
> 
> While at it, fix the possible NULL pointer dereference in other
> functions as well: of_thermal_get_temp(), of_thermal_set_emul_temp(),
> of_thermal_get_trend().
> 
> Cc: stable@vger.kernel.org
> Suggested-by: David Collins <quic_collinsd@quicinc.com>
> Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
> ---
> Changes for v2:
> - Added checks in of_thermal_get_temp(), of_thermal_set_emul_temp(), of_thermal_get_trend().
> 
>  drivers/thermal/thermal_of.c | 9 ++++++---
>  1 file changed, 6 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/thermal/thermal_of.c b/drivers/thermal/thermal_of.c
> index 6379f26..9233f7e 100644
> --- a/drivers/thermal/thermal_of.c
> +++ b/drivers/thermal/thermal_of.c
> @@ -89,7 +89,7 @@ static int of_thermal_get_temp(struct thermal_zone_device *tz,
>  {
>  	struct __thermal_zone *data = tz->devdata;
>  
> -	if (!data->ops->get_temp)
> +	if (!data->ops || !data->ops->get_temp)
>  		return -EINVAL;
>  
>  	return data->ops->get_temp(data->sensor_data, temp);
> @@ -186,6 +186,9 @@ static int of_thermal_set_emul_temp(struct thermal_zone_device *tz,
>  {
>  	struct __thermal_zone *data = tz->devdata;
>  
> +	if (!data->ops || !data->ops->set_emul_temp)
> +		return -EINVAL;
> +
>  	return data->ops->set_emul_temp(data->sensor_data, temp);
>  }
>  
> @@ -194,7 +197,7 @@ static int of_thermal_get_trend(struct thermal_zone_device *tz, int trip,
>  {
>  	struct __thermal_zone *data = tz->devdata;
>  
> -	if (!data->ops->get_trend)
> +	if (!data->ops || !data->ops->get_trend)
>  		return -EINVAL;
>  
>  	return data->ops->get_trend(data->sensor_data, trip, trend);
> @@ -301,7 +304,7 @@ static int of_thermal_set_trip_temp(struct thermal_zone_device *tz, int trip,
>  	if (trip >= data->ntrips || trip < 0)
>  		return -EDOM;
>  
> -	if (data->ops->set_trip_temp) {
> +	if (data->ops && data->ops->set_trip_temp) {
>  		int ret;
>  
>  		ret = data->ops->set_trip_temp(data->sensor_data, trip, temp);
> 


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog