attached is the oops, the config,  and some info on the box.

ide is only used for the cdrom.

it oopes during bootup.  also, if i remove ide from this kernel, it'll boot
on the scsi drive just fine.

2.4.19 works just fine on this box.


-steve


cpu info:

linux# cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 5
model name      : Pentium II (Deschutes)
stepping        : 1
cpu MHz         : 399.325
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr
bogomips        : 796.26

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 5
model name      : Pentium II (Deschutes)
stepping        : 2
cpu MHz         : 399.325
cache size      : 512 KB
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 2
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
cmov pat pse36 mmx fxsr
bogomips        : 797.90



pci information:

linux# lspci -v
00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 02)
        Flags: bus master, medium devsel, latency 32
        Memory at f0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [a0] AGP version 1.0

00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev
02) (prog-if 00 [Normal decode])
        Flags: 66Mhz, medium devsel
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64

00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev
05)
        Subsystem: IBM: Unknown device 00d7
        Flags: bus master, medium devsel, latency 64, IRQ 18
        Memory at f6dff000 (32-bit, prefetchable) [size=4K]
        I/O ports at 70e0 [size=32]
        Memory at f6f00000 (32-bit, non-prefetchable) [size=1M]
        Capabilities: [dc] Power Management version 1

00:03.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
        Subsystem: Adaptec AHA-2940U/2940UW Dual AHA-394xAU/AUW/AUWD
AIC-7895B
        Flags: bus master, medium devsel, latency 64, IRQ 19
        I/O ports at 7400 [size=256]
        Memory at f6ede000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at <unassigned> [disabled] [size=64K]
        Capabilities: [dc] Power Management version 1

00:03.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / AIC-7895
(rev 04)
        Subsystem: Adaptec AHA-2940U/2940UW Dual AHA-394xAU/AUW/AUWD
AIC-7895B
        Flags: bus master, medium devsel, latency 64, IRQ 19
        I/O ports at 7800 [size=256]
        Memory at f6edf000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [dc] Power Management version 1

00:04.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
        Flags: bus master, medium devsel, latency 0

00:04.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if
80 [Master])
        Flags: bus master, medium devsel, latency 32
        I/O ports at fff0 [size=16]

00:04.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
        Flags: bus master, medium devsel, latency 48, IRQ 19
        I/O ports at ff00 [size=32]

00:04.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
        Flags: medium devsel, IRQ 9

00:0f.0 Display controller: Texas Instruments TVP4020 [Permedia 2] (rev 01)
        Subsystem: Diamond Multimedia Systems FIRE GL 1000 PRO
        Flags: bus master, medium devsel, latency 208, IRQ 19
        Memory at f6ee0000 (32-bit, non-prefetchable) [size=128K]
        Memory at f7000000 (32-bit, non-prefetchable) [size=8M]
        Memory at f7800000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at <unassigned> [disabled] [size=64K]