From: Thomas Zimmermann <tzimmermann@suse.de>
To: "René Rebe" <rene@exactco.de>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Cc: Dave Airlie <airlied@redhat.com>
Subject: Re: [PATCH V4] drm/ast: Swap framebuffer writes on big-endian machines
Date: Mon, 15 Dec 2025 08:30:06 +0100 [thread overview]
Message-ID: <007be221-b28d-49c0-a7c7-0a4ea74d5d75@suse.de> (raw)
In-Reply-To: <20251212.210504.1355099120650239629.rene@exactco.de>
Am 12.12.25 um 21:05 schrieb René Rebe:
> Swap the pixel data when writing to framebuffer memory on big-endian
> machines. Fixes incorrect output. Aspeed graphics does not appear to
> support big-endian framebuffers after AST2400, although the feature
> has been documented.
>
> There's a lengthy discussion at [1].
>
> Signed-off-by: René Rebe <rene@exactco.de>
> Link: https://lore.kernel.org/dri-devel/20251202.170626.2134482663677806825.rene@exactco.de/ # [1]
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Thanks for the updated patch.
> ---
> The ARGB4444 cursor not yet 100% correct, but that might be another layer/helper bug.
> Tested on sparc64 T4-1 running T2/Linux.
> ---
> drivers/gpu/drm/ast/ast_cursor.c | 11 ++++++++---
> drivers/gpu/drm/ast/ast_mode.c | 11 +++++++++--
> 2 files changed, 17 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/ast/ast_cursor.c b/drivers/gpu/drm/ast/ast_cursor.c
> index 2d3ad7610c2e..d4620171d845 100644
> --- a/drivers/gpu/drm/ast/ast_cursor.c
> +++ b/drivers/gpu/drm/ast/ast_cursor.c
> @@ -92,12 +92,17 @@ static void ast_set_cursor_image(struct ast_device *ast, const u8 *src,
> unsigned int width, unsigned int height)
> {
> u8 __iomem *dst = ast_plane_vaddr(&ast->cursor_plane.base);
> - u32 csum;
> -
> - csum = ast_cursor_calculate_checksum(src, width, height);
> + u32 csum = ast_cursor_calculate_checksum(src, width, height);
>
> /* write pixel data */
> +#if defined(__BIG_ENDIAN)
> + unsigned int i;
> +
> + for (i = 0; i < AST_HWC_SIZE; i += 2)
> + writew(swab16(*(const __be16 *)&src[i]), &dst[i]);
> +#else
> memcpy_toio(dst, src, AST_HWC_SIZE);
> +#endif
>
> /* write checksum + signature */
> dst += AST_HWC_SIZE;
> diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
> index cd08990a10f9..57c6fbc3232b 100644
> --- a/drivers/gpu/drm/ast/ast_mode.c
> +++ b/drivers/gpu/drm/ast/ast_mode.c
> @@ -526,12 +526,18 @@ static int ast_primary_plane_helper_atomic_check(struct drm_plane *plane,
>
> static void ast_handle_damage(struct ast_plane *ast_plane, struct iosys_map *src,
> struct drm_framebuffer *fb,
> - const struct drm_rect *clip)
> + const struct drm_rect *clip,
> + struct drm_format_conv_state *fmtcnv_state)
> {
> struct iosys_map dst = IOSYS_MAP_INIT_VADDR_IOMEM(ast_plane_vaddr(ast_plane));
>
> iosys_map_incr(&dst, drm_fb_clip_offset(fb->pitches[0], fb->format, clip));
> +
> +#if defined(__BIG_ENDIAN)
> + drm_fb_swab(&dst, fb->pitches, src, fb, clip, !src[0].is_iomem, fmtcnv_state);
> +#else
> drm_fb_memcpy(&dst, fb->pitches, src, fb, clip);
> +#endif
> }
>
> static void ast_primary_plane_helper_atomic_update(struct drm_plane *plane,
> @@ -561,7 +567,8 @@ static void ast_primary_plane_helper_atomic_update(struct drm_plane *plane,
> if (drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE) == 0) {
> drm_atomic_helper_damage_iter_init(&iter, old_plane_state, plane_state);
> drm_atomic_for_each_plane_damage(&iter, &damage) {
> - ast_handle_damage(ast_plane, shadow_plane_state->data, fb, &damage);
> + ast_handle_damage(ast_plane, shadow_plane_state->data, fb, &damage,
> + &shadow_plane_state->fmtcnv_state);
> }
>
> drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Jochen Jaser, Andrew McDonald, Werner Knoblich, (HRB 36809, AG Nürnberg)
next prev parent reply other threads:[~2025-12-15 7:30 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-12 20:05 René Rebe
2025-12-15 7:30 ` Thomas Zimmermann [this message]
2025-12-20 16:31 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=007be221-b28d-49c0-a7c7-0a4ea74d5d75@suse.de \
--to=tzimmermann@suse.de \
--cc=airlied@redhat.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rene@exactco.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®