From: Chanho Park <chanho61.park@samsung.com>
To: "'Stephen Warren'" <swarren@nvidia.com>,
linus.walleij@linaro.org, Baohua.Song@csr.com,
linux-kernel@vger.kernel.org
Cc: "'Kyungmin Park'" <kyungmin.park@samsung.com>
Subject: RE: [PATCH] drivers: pinctrl: add a pin_base for sparse gpio-ranges
Date: Wed, 26 Oct 2011 18:39:22 +0900 [thread overview]
Message-ID: <008201cc93c3$24867880$6d936980$%park@samsung.com> (raw)
In-Reply-To: <74CDBE0F657A3D45AFBB94109FB122FF173E1B452D@HQMAIL01.nvidia.com>
> -----Original Message-----
> From: Stephen Warren [mailto:swarren@nvidia.com]
> Sent: Wednesday, October 26, 2011 3:21 PM
> To: Chanho Park; linus.walleij@linaro.org; Baohua.Song@csr.com; linux-
> kernel@vger.kernel.org
> Cc: Kyungmin Park
> Subject: RE: [PATCH] drivers: pinctrl: add a pin_base for sparse gpio-
> ranges
>
> Chanho Park wrote at Tuesday, October 25, 2011 10:22 PM:
> > This patch enables mapping a base offset of gpio ranges with
> > a pin offset even if does'nt matched. A base of pinctrl_gpio_range
> > means a base offset of gpio. However, we cannot convert gpio to pin
> > number for sparse gpio ranges just only using a gpio base offset.
> > We can convert a gpio to real pin number(even if not matched) using
> > a new pin_base which means a base pin offset of requested gpio range.
> ...
> > diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
> ...
> > @@ -289,38 +291,12 @@ So this complex system has one pin controller
> handling two different
> > GPIO chips. Chip a has 16 pins and chip b has 8 pins. They are mapped
> in
> > the global GPIO pin space at:
> >
> > -chip a: [32 .. 47]
> > -chip b: [48 .. 55]
> > -
> > -When GPIO-specific functions in the pin control subsystem are called,
> these
> > -ranges will be used to look up the apropriate pin controller by
> inspecting
> > -and matching the pin to the pin ranges across all controllers. When a
> > -... [ quit a few lines of documentation removed]
> > -(If the GPIO subsystem is ever refactored to use a local per-GPIO
> controller
> > -pin space, this mapping will need to be augmented accordingly.)
> > -
> > +chip a:
> > + gpio-range : [32 .. 47]
> > + pin-range : [32 .. 47]
> > +chip b:
> > + gpio-range : [48 .. 55]
> > + pin-range : [64 .. 71]
>
> I'm all for replacing the example here with something more complete, but
> removing all that text from the documentation doesn't seem right.
OK. I'll modify this part of the documentation.
>
> ...
> > diff --git a/include/linux/pinctrl/pinctrl.h
> b/include/linux/pinctrl/pinctrl.h
> > index 90dd28b..7768e44 100644
> > --- a/include/linux/pinctrl/pinctrl.h
> > +++ b/include/linux/pinctrl/pinctrl.h
> > @@ -127,6 +127,7 @@ struct pinctrl_pin_desc {
> > * @name: a name for the chip in this range
> > * @id: an ID number for the chip in this range
> > * @base: base offset of the GPIO range
> > + * @pin_base: base pin offset of the GPIO range
>
> This may be bike-shedding, but I'd tend to call this "gpio_base", since
> it's the first "gpio" number of this range, not the first "pin" number
> ("pins" are used in the pinctrl subsystem, but "gpios" by the GPIO
> Subsystem)
A "base" means first "gpio" number of the range.
And a "pin_base" means first "pin" number.
Do you want to replace the "base" to the "gpio_base"?
>
> --
> nvpublic
next prev parent reply other threads:[~2011-10-26 9:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-26 4:22 Chanho Park
2011-10-26 6:21 ` Stephen Warren
2011-10-26 9:39 ` Chanho Park [this message]
2011-10-27 16:10 ` Stephen Warren
2011-10-28 19:57 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='008201cc93c3$24867880$6d936980$%park@samsung.com' \
--to=chanho61.park@samsung.com \
--cc=Baohua.Song@csr.com \
--cc=kyungmin.park@samsung.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=swarren@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®