From: Chao Yu <chao2.yu@samsung.com>
To: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: linux-f2fs-devel@lists.sourceforge.net, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/3] f2fs: simplify f2fs_map_blocks
Date: Tue, 26 Jan 2016 15:37:38 +0800 [thread overview]
Message-ID: <009201d1580c$86b5faa0$9421efe0$@samsung.com> (raw)
In f2fs_map_blocks, we use duplicated codes to handle first block mapping
and the following blocks mapping, it's unnecessary. This patch simplifies
f2fs_map_blocks to avoid using copied codes.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
---
V2:
- rebase on last dev-test
fs/f2fs/data.c | 101 ++++++++++++++++++---------------------------------------
1 file changed, 32 insertions(+), 69 deletions(-)
diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c
index c85acbc..f570d37 100644
--- a/fs/f2fs/data.c
+++ b/fs/f2fs/data.c
@@ -632,6 +632,7 @@ int f2fs_map_blocks(struct inode *inode, struct f2fs_map_blocks *map,
goto out;
}
+next_dnode:
if (create)
f2fs_lock_op(sbi);
@@ -644,47 +645,57 @@ int f2fs_map_blocks(struct inode *inode, struct f2fs_map_blocks *map,
goto unlock_out;
}
- if (dn.data_blkaddr == NEW_ADDR || dn.data_blkaddr == NULL_ADDR) {
+ end_offset = ADDRS_PER_PAGE(dn.node_page, F2FS_I(inode));
+
+next_block:
+ blkaddr = datablock_addr(dn.node_page, dn.ofs_in_node);
+
+ if (blkaddr == NEW_ADDR || blkaddr == NULL_ADDR) {
if (create) {
if (unlikely(f2fs_cp_error(sbi))) {
err = -EIO;
- goto put_out;
+ goto sync_out;
}
err = __allocate_data_block(&dn);
if (err)
- goto put_out;
+ goto sync_out;
allocated = true;
map->m_flags = F2FS_MAP_NEW;
+ blkaddr = dn.data_blkaddr;
} else {
if (flag != F2FS_GET_BLOCK_FIEMAP ||
- dn.data_blkaddr != NEW_ADDR) {
+ blkaddr != NEW_ADDR) {
if (flag == F2FS_GET_BLOCK_BMAP)
err = -ENOENT;
- goto put_out;
+ goto sync_out;
}
-
- /*
- * preallocated unwritten block should be mapped
- * for fiemap.
- */
- if (dn.data_blkaddr == NEW_ADDR)
- map->m_flags = F2FS_MAP_UNWRITTEN;
}
}
- map->m_flags |= F2FS_MAP_MAPPED;
- map->m_pblk = dn.data_blkaddr;
- map->m_len = 1;
+ if (map->m_len == 0) {
+ /* preallocated unwritten block should be mapped for fiemap. */
+ if (blkaddr == NEW_ADDR)
+ map->m_flags |= F2FS_MAP_UNWRITTEN;
+ map->m_flags |= F2FS_MAP_MAPPED;
+
+ map->m_pblk = blkaddr;
+ map->m_len = 1;
+ } else if ((map->m_pblk != NEW_ADDR &&
+ blkaddr == (map->m_pblk + ofs)) ||
+ (map->m_pblk == NEW_ADDR && blkaddr == NEW_ADDR)) {
+ ofs++;
+ map->m_len++;
+ } else {
+ goto sync_out;
+ }
- end_offset = ADDRS_PER_PAGE(dn.node_page, F2FS_I(inode));
dn.ofs_in_node++;
pgofs++;
-get_next:
- if (map->m_len >= maxblocks)
- goto sync_out;
+ if (map->m_len < maxblocks) {
+ if (dn.ofs_in_node < end_offset)
+ goto next_block;
- if (dn.ofs_in_node >= end_offset) {
if (allocated)
sync_inode_page(&dn);
f2fs_put_dnode(&dn);
@@ -692,62 +703,14 @@ get_next:
if (create) {
f2fs_unlock_op(sbi);
f2fs_balance_fs(sbi, allocated);
- f2fs_lock_op(sbi);
}
allocated = false;
-
- set_new_dnode(&dn, inode, NULL, NULL, 0);
- err = get_dnode_of_data(&dn, pgofs, mode);
- if (err) {
- if (err == -ENOENT)
- err = 0;
- goto unlock_out;
- }
-
- end_offset = ADDRS_PER_PAGE(dn.node_page, F2FS_I(inode));
- }
-
- blkaddr = datablock_addr(dn.node_page, dn.ofs_in_node);
-
- if (blkaddr == NEW_ADDR || blkaddr == NULL_ADDR) {
- if (create) {
- if (unlikely(f2fs_cp_error(sbi))) {
- err = -EIO;
- goto sync_out;
- }
- err = __allocate_data_block(&dn);
- if (err)
- goto sync_out;
- allocated = true;
- map->m_flags |= F2FS_MAP_NEW;
- blkaddr = dn.data_blkaddr;
- } else {
- /*
- * we only merge preallocated unwritten blocks
- * for fiemap.
- */
- if (flag != F2FS_GET_BLOCK_FIEMAP ||
- blkaddr != NEW_ADDR)
- goto sync_out;
- }
- }
-
- /* Give more consecutive addresses for the readahead */
- if ((map->m_pblk != NEW_ADDR &&
- blkaddr == (map->m_pblk + ofs)) ||
- (map->m_pblk == NEW_ADDR &&
- blkaddr == NEW_ADDR)) {
- ofs++;
- dn.ofs_in_node++;
- pgofs++;
- map->m_len++;
- goto get_next;
+ goto next_dnode;
}
sync_out:
if (allocated)
sync_inode_page(&dn);
-put_out:
f2fs_put_dnode(&dn);
unlock_out:
if (create) {
--
2.7.0.2.g1b0b6dd
reply other threads:[~2016-01-26 7:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='009201d1580c$86b5faa0$9421efe0$@samsung.com' \
--to=chao2.yu@samsung.com \
--cc=jaegeuk@kernel.org \
--cc=linux-f2fs-devel@lists.sourceforge.net \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome