Re: Problem with Ramdisk in linux-2.4.1

["Jaswinder Singh" <jaswinder.singh@3disystems.com>]

Dear Mike and others ,

Sometimes i also get :-

incomplete literal tree
OR
incomplete distance tree

along with

invalid compressed format (err=1)
OR
invalid compressed format (err=2)
OR
crc error

And it is very strange because for the same ramdisk , linux2.4.1 shows me
all the error messages .

I am using Ramdisk of 8 MB on compression it becomes around 1.4 MB.

Please help me.

Thanks ,

Best Regards,

 Jaswinder.
 --
 These are my opinions not 3Di.


----- Original Message -----
From: "Jaswinder Singh" <jaswinder.singh@3disystems.com>
To: "Mike Galbraith" <mikeg@wen-online.de>; <linux-kernel@vger.kernel.org>
Cc: "Jaswinder Singh" <jaswinder.singh@3disystems.com>
Sent: Tuesday, February 13, 2001 11:08 AM
Subject: Re: Problem with Ramdisk in linux-2.4.1


> Dear Mike and others ,
>
> I am using compressed ramdisk , i can not turn off cramfs .
>
> my error messages are very strange and irreregular .
>
> i am getting 3 different kind of error messages :-
>
> invalid compressed format (err=1)
> OR
> invalid compressed format (err=2)
> OR
> crc error
>
> I am using gzip 1.2.4 (18 Aug 93)
>
> But when i use same ramdisk with old kernel like 2.2.12 , it works fine .
>
> Please help me.
>
> Thanks ,
>
> Best Regards,
>
> Jaswinder.
> --
> These are my opinions not 3Di.
>
> ----- Original Message -----
> From: "Mike Galbraith" <mikeg@wen-online.de>
> To: "Jaswinder Singh" <jaswinder.singh@3disystems.com>
> Sent: Tuesday, February 13, 2001 12:22 AM
> Subject: Re: Problem with Ramdisk in linux-2.4.1
>
>
> > On Mon, 12 Feb 2001, Jaswinder Singh wrote:
> >
> > > Dear linux-kernel mailing list,
> > >
> > > I am facing this problem in linux-2.4.1 :-
> > >
> > > RAMDISK driver initialized: 16 RAM disks of 8192K size
> > > 1024 blocksize
> > > RAMDISK: Compressed image found at block 0
> > >  incomplete distance tree
> > > invalid compressed format (err=1)Freeing initrd
> > > memory: 4096k freed
> > >
> > > Is any body seen this problem earlier , any hint .
> >
> > Hi,
> >
> > I think I might have seen this problem before.  If this isn't
> > a cramfs initrd, turn off cramfs and I think it'll work right.
> > I once had cramfs on by accident, and I found that my initrd
> > wouldn't load.
> >
> > -Mike
> >
>