From: Jingoo Han <jg1.han@samsung.com>
To: "'Grant Likely'" <grant.likely@secretlab.ca>,
"'Linus Walleij'" <linus.walleij@linaro.org>
Cc: "'Kukjin Kim'" <kgene.kim@samsung.com>,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
"'Ryan Mallon'" <rmallon@gmail.com>,
"'Jingoo Han'" <jg1.han@samsung.com>
Subject: [PATCH V4] gpio: samsung: use pr_* instead of printk
Date: Mon, 22 Oct 2012 10:10:45 +0900 [thread overview]
Message-ID: <00a301cdaff2$10723900$3156ab00$%han@samsung.com> (raw)
This patch uses pr_* instead of printk. Also, gpio_dbg
is replaced with pr_debug.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
Change since v3:
- remove Linus Walleij's Reviewed-by
Change since v2:
- remove Ryan Mallon's Signed-off-by
drivers/gpio/gpio-samsung.c | 18 ++++++------------
1 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index a006f0d..5c5ccdf 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -42,12 +42,6 @@
#include <plat/gpio-fns.h>
#include <plat/pm.h>
-#ifndef DEBUG_GPIO
-#define gpio_dbg(x...) do { } while (0)
-#else
-#define gpio_dbg(x...) printk(KERN_DEBUG x)
-#endif
-
int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
unsigned int off, samsung_gpio_pull_t pull)
{
@@ -599,7 +593,7 @@ static int samsung_gpiolib_4bit_input(struct gpio_chip *chip,
con &= ~(0xf << con_4bit_shift(offset));
__raw_writel(con, base + GPIOCON_OFF);
- gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+ pr_debug("%s: %p: CON now %08lx\n", __func__, base, con);
return 0;
}
@@ -627,7 +621,7 @@ static int samsung_gpiolib_4bit_output(struct gpio_chip *chip,
__raw_writel(con, base + GPIOCON_OFF);
__raw_writel(dat, base + GPIODAT_OFF);
- gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+ pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
return 0;
}
@@ -671,7 +665,7 @@ static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip,
con &= ~(0xf << con_4bit_shift(offset));
__raw_writel(con, regcon);
- gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con);
+ pr_debug("%s: %p: CON %08lx\n", __func__, base, con);
return 0;
}
@@ -706,7 +700,7 @@ static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip,
__raw_writel(con, regcon);
__raw_writel(dat, base + GPIODAT_OFF);
- gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+ pr_debug("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
return 0;
}
@@ -926,10 +920,10 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
#ifdef CONFIG_PM
if (chip->pm != NULL) {
if (!chip->pm->save || !chip->pm->resume)
- printk(KERN_ERR "gpio: %s has missing PM functions\n",
+ pr_err("gpio: %s has missing PM functions\n",
gc->label);
} else
- printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+ pr_err("gpio: %s has no PM function\n", gc->label);
#endif
/* gpiochip_add() prints own failure message on error. */
--
1.7.1
reply other threads:[~2012-10-22 1:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='00a301cdaff2$10723900$3156ab00$%han@samsung.com' \
--to=jg1.han@samsung.com \
--cc=grant.likely@secretlab.ca \
--cc=kgene.kim@samsung.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=rmallon@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome