Re: [PATCH v3] firmware: qcom_scm: Clear download bit during reboot

[Mukesh Ojha <quic_mojha@quicinc.com>]

Hey Robert,

Just remembered this thread again,

is this issue got fixed with

https://lore.kernel.org/lkml/20230816164641.3371878-1-robimarko@gmail.com/


-Mukesh

On 5/26/2023 3:13 AM, Robert Marko wrote:
> On Tue, 23 May 2023 at 11:42, Mukesh Ojha <quic_mojha@quicinc.com> wrote:
>>
>>
>>
>> On 5/22/2023 3:34 PM, Robert Marko wrote:
>>> On Mon, 22 May 2023 at 11:26, Robert Marko <robimarko@gmail.com> wrote:
>>>>
>>>> On Mon, 22 May 2023 at 11:11, Mukesh Ojha <quic_mojha@quicinc.com> wrote:
>>>>>
>>>>>
>>>>>
>>>>> On 5/22/2023 2:29 PM, Robert Marko wrote:
>>>>>> On Mon, 22 May 2023 at 08:11, Mukesh Ojha <quic_mojha@quicinc.com> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 5/18/2023 3:45 PM, Robert Marko wrote:
>>>>>>>>
>>>>>>>> On 16. 03. 2023. 16:14, Mukesh Ojha wrote:
>>>>>>>>> During normal restart of a system download bit should
>>>>>>>>> be cleared irrespective of whether download mode is
>>>>>>>>> set or not.
>>>>>>>>>
>>>>>>>>> Fixes: 8c1b7dc9ba22 ("firmware: qcom: scm: Expose download-mode control")
>>>>>>>>> Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
>>>>>>>>
>>>>>>>> Hi, this has been backported to 5.15.111, however it seems to be
>>>>>>>> breaking reboot
>>>>>>>> on IPQ4019 by causing the board to then hang in SBL with:
>>>>>>>> root@OpenWrt:/# reboot
>>>>>>>> root@OpenWrt:/# [   76.473541] device lan1 left promiscuous mode
>>>>>>>> [   76.474204] br-lan: port 1(lan1) entered disabled state
>>>>>>>> [   76.527975] device lan2 left promiscuous mode
>>>>>>>> [   76.530301] br-lan: port 2(lan2) entered disabled state
>>>>>>>> [   76.579376] device lan3 left promiscuous mode
>>>>>>>> [   76.581698] br-lan: port 3(lan3) entered disabled state
>>>>>>>> [   76.638434] device lan4 left promiscuous mode
>>>>>>>> [   76.638777] br-lan: port 4(lan4) entered disabled state
>>>>>>>> [   76.978489] qca8k-ipq4019 c000000.switch wan: Link is Down
>>>>>>>> [   76.978883] device eth0 left promiscuous mode
>>>>>>>> [   76.987077] ipqess-edma c080000.ethernet eth0: Link is Down
>>>>>>>> [
>>>>>>>> Format: Log Type - Time(microsec) - Message - Optional Info
>>>>>>>> Log Type: B - Since Boot(Power On Reset),  D - Delta,  S - Statistic
>>>>>>>> S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00123
>>>>>>>> S - IMAGE_VARIANT_STRING=DAABANAZA
>>>>>>>> S - OEM_IMAGE_VERSION_STRING=CRM
>>>>>>>> S - Boot Config, 0x00000021
>>>>>>>> S - Reset status Config, 0x00000010
>>>>>>>> S - Core 0 Frequency, 0 MHz
>>>>>>>> B -       261 - PBL, Start
>>>>>>>> B -      1339 - bootable_media_detect_entry, Start
>>>>>>>> B -      1679 - bootable_media_detect_success, Start
>>>>>>>> B -      1693 - elf_loader_entry, Start
>>>>>>>> B -      5076 - auth_hash_seg_entry, Start
>>>>>>>> B -      7223 - auth_hash_seg_exit, Start
>>>>>>>> B -    578349 - elf_segs_hash_verify_entry, Start
>>>>>>>> B -    696356 - PBL, End
>>>>>>>> B -    696380 - SBL1, Start
>>>>>>>> B -    787236 - pm_device_init, Start
>>>>>>>> D -         7 - pm_device_init, Delta
>>>>>>>> B -    788701 - boot_flash_init, Start
>>>>>>>> D -     52782 - boot_flash_init, Delta
>>>>>>>> B -    845625 - boot_config_data_table_init, Start
>>>>>>>> D -      3836 - boot_config_data_table_init, Delta - (419 Bytes)
>>>>>>>> B -    852841 - clock_init, Start
>>>>>>>> D -      7566 - clock_init, Delta
>>>>>>>> B -    864883 - CDT version:2,Platform ID:9,Major ID:0,Minor
>>>>>>>> ID:0,Subtype:64
>>>>>>>> B -    868413 - sbl1_ddr_set_params, Start
>>>>>>>> B -    873402 - cpr_init, Start
>>>>>>>> D -         2 - cpr_init, Delta
>>>>>>>> B -    877842 - Pre_DDR_clock_init, Start
>>>>>>>> D -         4 - Pre_DDR_clock_init, Delta
>>>>>>>> D -     13234 - sbl1_ddr_set_params, Delta
>>>>>>>> B -    891155 - pm_driver_init, Start
>>>>>>>> D -         2 - pm_driver_init, Delta
>>>>>>>> B -    909105 - Image Load, Start
>>>>>>>> B -   1030210 - Boot error ocuured!. Error code: 303d
>>>>>>>>
>>>>>>>> Reverting the commit fixes rebooting.
>>>>>>>
>>>>>>> Hi Robert,
>>>>>>>
>>>>>>> Can you check if disable SDI [1] works with this issue
>>>>>>>
>>>>>>> https://lore.kernel.org/linux-arm-msm/20230518140224.2248782-1-robimarko@gmail.com/
>>>>>>>
>>>>>>> [1]
>>>>>>>
>>>>>>>
>>>>>>> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
>>>>>>> index fde33acd46b7..01496ceb7136 100644
>>>>>>> --- a/drivers/firmware/qcom_scm.c
>>>>>>> +++ b/drivers/firmware/qcom_scm.c
>>>>>>> @@ -1508,6 +1508,7 @@ static int qcom_scm_probe(struct platform_device
>>>>>>> *pdev)
>>>>>>>      static void qcom_scm_shutdown(struct platform_device *pdev)
>>>>>>>      {
>>>>>>>             /* Clean shutdown, disable download mode to allow normal restart */
>>>>>>> +       qcom_scm_disable_sdi();
>>>>>>>             qcom_scm_set_download_mode(false);
>>>>>>>      }
>>>>>>
>>>>>> Hi,
>>>>>> I can confirm reboot works this way as well.
>>>>>
>>>>> That's great, So, i don't need to revert the patch and you can
>>>>> add this in your patch without target specific check ?
>>>>
>>>> Oh, you mean IPQ4019 not rebooting?
>>>> I haven't tested that, give me couple of minutes to try that out.
>>>> Cause, the link was just back to the SDI patchset.
>>>
>>> And, I can confirm that IPQ4019 does not reboot even with SDI disabled if dload
>>> mode was set so it still needs a revert.
>>
>> Ok, So, before we go for revert of the change.
>>
>> - How do you generally collect the ram dump on your device on crash ?
>>     did you check if you get any error when qcom_scm_set_download_mode()
>>     get called.
> 
> Hi,
> Unfortunately, I dont have a way to collect the RAM dump in this case.
> 
> I checked and __qcom_scm_set_dload_mode returns 0 and there are no
> errors.
> 
> Regards,
> Robert
>>
>>
>> -- Mukesh
>>
>>>
>>> Regards,
>>> Robert
>>>>
>>>> Regards,
>>>> Robert
>>>>>
>>>>> -- Mukesh
>>>>>
>>>>>>
>>>>>> Regards,
>>>>>> Robert
>>>>>>>
>>>>>>>
>>>>>>> -- Mukesh
>>>>>>>
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Robert
>>>>>>>>
>>>>>>>>> ---
>>>>>>>>> Changes in v3:
>>>>>>>>>       - Added Fixes tag.
>>>>>>>>>       - Removed it from below patch series, as it makes sense to go this
>>>>>>>>> independently.
>>>>>>>>>
>>>>>>>>> https://lore.kernel.org/lkml/1677664555-30191-1-git-send-email-quic_mojha@quicinc.com/
>>>>>>>>>
>>>>>>>>> Changes in v2:
>>>>>>>>>       - No change.
>>>>>>>>>
>>>>>>>>>      drivers/firmware/qcom_scm.c | 3 +--
>>>>>>>>>      1 file changed, 1 insertion(+), 2 deletions(-)
>>>>>>>>>
>>>>>>>>> diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
>>>>>>>>> index 468d4d5..3e020d1 100644
>>>>>>>>> --- a/drivers/firmware/qcom_scm.c
>>>>>>>>> +++ b/drivers/firmware/qcom_scm.c
>>>>>>>>> @@ -1506,8 +1506,7 @@ static int qcom_scm_probe(struct platform_device
>>>>>>>>> *pdev)
>>>>>>>>>      static void qcom_scm_shutdown(struct platform_device *pdev)
>>>>>>>>>      {
>>>>>>>>>          /* Clean shutdown, disable download mode to allow normal restart */
>>>>>>>>> -    if (download_mode)
>>>>>>>>> -        qcom_scm_set_download_mode(false);
>>>>>>>>> +    qcom_scm_set_download_mode(false);
>>>>>>>>>      }
>>>>>>>>>      static const struct of_device_id qcom_scm_dt_match[] = {