From: Juergen Gross <jgross@suse.com>
To: Stefano Stabellini <sstabellini@kernel.org>, xen-devel@lists.xen.org
Cc: linux-kernel@vger.kernel.org, boris.ostrovsky@oracle.com,
Stefano Stabellini <stefano@aporeto.com>
Subject: Re: [PATCH v6 09/18] xen/pvcalls: implement bind command
Date: Tue, 4 Jul 2017 09:24:17 +0200 [thread overview]
Message-ID: <00f2b9d3-9640-426a-a8ee-41479e47e88d@suse.com> (raw)
In-Reply-To: <1499116119-15638-9-git-send-email-sstabellini@kernel.org>
On 03/07/17 23:08, Stefano Stabellini wrote:
> Allocate a socket. Track the allocated passive sockets with a new data
> structure named sockpass_mapping. It contains an unbound workqueue to
> schedule delayed work for the accept and poll commands. It also has a
> reqcopy field to be used to store a copy of a request for delayed work.
> Reads/writes to it are protected by a lock (the "copy_lock" spinlock).
> Initialize the workqueue in pvcalls_back_bind.
>
> Implement the bind command with inet_bind.
>
> The pass_sk_data_ready event handler will be added later.
>
> Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> CC: boris.ostrovsky@oracle.com
> CC: jgross@suse.com
> ---
> drivers/xen/pvcalls-back.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 87 insertions(+)
>
> diff --git a/drivers/xen/pvcalls-back.c b/drivers/xen/pvcalls-back.c
> index 1bc2620..dae91fb 100644
> --- a/drivers/xen/pvcalls-back.c
> +++ b/drivers/xen/pvcalls-back.c
> @@ -78,6 +78,18 @@ struct sock_mapping {
> struct pvcalls_ioworker ioworker;
> };
>
> +struct sockpass_mapping {
> + struct list_head list;
> + struct pvcalls_fedata *fedata;
> + struct socket *sock;
> + uint64_t id;
> + struct xen_pvcalls_request reqcopy;
> + spinlock_t copy_lock;
> + struct workqueue_struct *wq;
> + struct work_struct register_work;
> + void (*saved_data_ready)(struct sock *sk);
> +};
> +
> static irqreturn_t pvcalls_back_conn_event(int irq, void *sock_map);
> static int pvcalls_back_release_active(struct xenbus_device *dev,
> struct pvcalls_fedata *fedata,
> @@ -263,9 +275,84 @@ static int pvcalls_back_release(struct xenbus_device *dev,
> return 0;
> }
>
> +static void __pvcalls_back_accept(struct work_struct *work)
> +{
> +}
> +
> +static void pvcalls_pass_sk_data_ready(struct sock *sock)
> +{
> +}
> +
> static int pvcalls_back_bind(struct xenbus_device *dev,
> struct xen_pvcalls_request *req)
> {
> + struct pvcalls_fedata *fedata;
> + int ret, err;
> + struct socket *sock;
Get rid of sock, ...
> + struct sockpass_mapping *map;
> + struct xen_pvcalls_response *rsp;
> +
> + fedata = dev_get_drvdata(&dev->dev);
> +
> + map = kzalloc(sizeof(*map), GFP_KERNEL);
> + if (map == NULL) {
> + ret = -ENOMEM;
> + goto out;
> + }
> +
> + INIT_WORK(&map->register_work, __pvcalls_back_accept);
> + spin_lock_init(&map->copy_lock);
> + map->wq = alloc_workqueue("pvcalls_wq", WQ_UNBOUND, 1);
> + if (!map->wq) {
> + ret = -ENOMEM;
> + kfree(map);
Move kfree(map) to the exit path, ...
> + goto out;
> + }
> +
> + ret = sock_create(AF_INET, SOCK_STREAM, 0, &sock);
use &map->sock here, ...
> + if (ret < 0) {
> + destroy_workqueue(map->wq);
move destory_workqueue() to the exit path, ...
> + kfree(map);
> + goto out;
> + }
> +
> + ret = inet_bind(sock, (struct sockaddr *)&req->u.bind.addr,
> + req->u.bind.len);
> + if (ret < 0) {
> + sock_release(sock);
and sock_release, too, ...
> + destroy_workqueue(map->wq);
> + kfree(map);
> + goto out;
> + }
> +
> + map->fedata = fedata;
> + map->sock = sock;
> + map->id = req->u.bind.id;
> +
> + down(&fedata->socket_lock);
> + err = radix_tree_insert(&fedata->socketpass_mappings, map->id,
> + map);
User ret instead of err?
> + up(&fedata->socket_lock);
> + if (err) {
> + ret = err;
> + sock_release(sock);
> + destroy_workqueue(map->wq);
> + kfree(map);
> + goto out;
> + }
> +
> + write_lock_bh(&sock->sk->sk_callback_lock);
> + map->saved_data_ready = sock->sk->sk_data_ready;
> + sock->sk->sk_user_data = map;
> + sock->sk->sk_data_ready = pvcalls_pass_sk_data_ready;
> + write_unlock_bh(&sock->sk->sk_callback_lock);
> +
> +out:
> + rsp = RING_GET_RESPONSE(&fedata->ring, fedata->ring.rsp_prod_pvt++);
> + rsp->req_id = req->req_id;
> + rsp->cmd = req->cmd;
> + rsp->u.bind.id = req->u.bind.id;
> + rsp->ret = ret;
... have a common error exit handling:
+ if (ret) {
+ if (map && map->sock)
+ sock_release(map->sock);
+ if (map && map->wq)
+ destroy_workqueue(map->wq);
+ kfree(map);
+ }
Juergen
next prev parent reply other threads:[~2017-07-04 7:24 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-03 21:08 [PATCH v6 00/18] introduce the Xen PV Calls backend Stefano Stabellini
2017-07-03 21:08 ` [PATCH v6 01/18] xen: introduce the pvcalls interface header Stefano Stabellini
2017-07-03 21:08 ` [PATCH v6 02/18] xen/pvcalls: introduce the pvcalls xenbus backend Stefano Stabellini
2017-07-04 8:04 ` Juergen Gross
2017-07-03 21:08 ` [PATCH v6 03/18] xen/pvcalls: initialize the module and register the " Stefano Stabellini
2017-07-04 8:04 ` Juergen Gross
2017-07-03 21:08 ` [PATCH v6 04/18] xen/pvcalls: xenbus state handling Stefano Stabellini
2017-07-04 8:03 ` Juergen Gross
2017-07-05 20:24 ` Stefano Stabellini
2017-07-03 21:08 ` [PATCH v6 05/18] xen/pvcalls: connect to a frontend Stefano Stabellini
2017-07-04 6:59 ` Juergen Gross
2017-07-05 20:29 ` Stefano Stabellini
2017-07-03 21:08 ` [PATCH v6 06/18] xen/pvcalls: handle commands from the frontend Stefano Stabellini
2017-07-04 6:57 ` Juergen Gross
2017-07-05 20:43 ` Stefano Stabellini
2017-07-03 21:08 ` [PATCH v6 07/18] xen/pvcalls: implement socket command Stefano Stabellini
2017-07-04 7:52 ` Juergen Gross
2017-07-03 21:08 ` [PATCH v6 08/18] xen/pvcalls: implement connect command Stefano Stabellini
2017-07-04 7:14 ` Juergen Gross
2017-07-05 21:09 ` Stefano Stabellini
2017-07-03 21:08 ` [PATCH v6 09/18] xen/pvcalls: implement bind command Stefano Stabellini
2017-07-04 7:24 ` Juergen Gross [this message]
2017-07-05 21:18 ` Stefano Stabellini
2017-07-03 21:08 ` [PATCH v6 10/18] xen/pvcalls: implement listen command Stefano Stabellini
2017-07-04 7:51 ` Juergen Gross
2017-07-03 21:08 ` [PATCH v6 11/18] xen/pvcalls: implement accept command Stefano Stabellini
2017-07-04 7:26 ` Juergen Gross
2017-07-03 21:08 ` [PATCH v6 12/18] xen/pvcalls: implement poll command Stefano Stabellini
2017-07-04 7:28 ` Juergen Gross
2017-07-03 21:08 ` [PATCH v6 13/18] xen/pvcalls: implement release command Stefano Stabellini
2017-07-04 7:30 ` Juergen Gross
2017-07-03 21:08 ` [PATCH v6 14/18] xen/pvcalls: disconnect and module_exit Stefano Stabellini
2017-07-04 7:32 ` Juergen Gross
2017-07-05 21:22 ` Stefano Stabellini
2017-07-03 21:08 ` [PATCH v6 15/18] xen/pvcalls: implement the ioworker functions Stefano Stabellini
2017-07-04 7:48 ` Juergen Gross
2017-07-05 21:26 ` Stefano Stabellini
2017-07-03 21:08 ` [PATCH v6 16/18] xen/pvcalls: implement read Stefano Stabellini
2017-07-04 7:36 ` Juergen Gross
2017-07-03 21:08 ` [PATCH v6 17/18] xen/pvcalls: implement write Stefano Stabellini
2017-07-04 7:49 ` Juergen Gross
2017-07-03 21:08 ` [PATCH v6 18/18] xen: introduce a Kconfig option to enable the pvcalls backend Stefano Stabellini
2017-07-04 7:50 ` Juergen Gross
2017-07-04 8:05 ` [PATCH v6 01/18] xen: introduce the pvcalls interface header Juergen Gross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00f2b9d3-9640-426a-a8ee-41479e47e88d@suse.com \
--to=jgross@suse.com \
--cc=boris.ostrovsky@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sstabellini@kernel.org \
--cc=stefano@aporeto.com \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®