From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
To: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
Cc: dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-media@vger.kernel.org,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Michal Simek <michal.simek@amd.com>,
Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>, Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>
Subject: Re: [PATCH v3 4/9] drm: xlnx: zynqmp_dpsub: Anounce supported input formats
Date: Fri, 5 Apr 2024 15:39:22 +0300 [thread overview]
Message-ID: <0179c94f-88c1-4b54-8a61-2834f35325ec@ideasonboard.com> (raw)
In-Reply-To: <20240321-dp-live-fmt-v3-4-d5090d796b7e@amd.com>
On 21/03/2024 22:43, Anatoliy Klymenko wrote:
> DPSUB in bridge mode supports multiple input media bus formats.
>
> Announce the list of supported input media bus formats via
> drm_bridge.atomic_get_input_bus_fmts callback.
> Introduce a set of live input formats, supported by DPSUB.
> Rename zynqmp_disp_layer_drm_formats() to zynqmp_disp_layer_formats() to
> reflect semantics for both live and non-live layer format lists.
>
> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Signed-off-by: Anatoliy Klymenko <anatoliy.klymenko@amd.com>
> ---
> drivers/gpu/drm/xlnx/zynqmp_disp.c | 76 +++++++++++++++++++++++++++++++++-----
> drivers/gpu/drm/xlnx/zynqmp_disp.h | 4 +-
> drivers/gpu/drm/xlnx/zynqmp_dp.c | 31 ++++++++++++++++
> drivers/gpu/drm/xlnx/zynqmp_kms.c | 2 +-
> 4 files changed, 101 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.c b/drivers/gpu/drm/xlnx/zynqmp_disp.c
> index e6d26ef60e89..abdc3971b193 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_disp.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_disp.c
> @@ -18,6 +18,7 @@
> #include <linux/dma/xilinx_dpdma.h>
> #include <linux/dma-mapping.h>
> #include <linux/dmaengine.h>
> +#include <linux/media-bus-format.h>
> #include <linux/module.h>
> #include <linux/of.h>
> #include <linux/platform_device.h>
> @@ -77,12 +78,14 @@ enum zynqmp_dpsub_layer_mode {
> /**
> * struct zynqmp_disp_format - Display subsystem format information
> * @drm_fmt: DRM format (4CC)
> + * @bus_fmt: Media bus format
> * @buf_fmt: AV buffer format
> * @swap: Flag to swap R & B for RGB formats, and U & V for YUV formats
> * @sf: Scaling factors for color components
> */
> struct zynqmp_disp_format {
> u32 drm_fmt;
> + u32 bus_fmt;
> u32 buf_fmt;
> bool swap;
> const u32 *sf;
> @@ -182,6 +185,12 @@ static const u32 scaling_factors_565[] = {
> ZYNQMP_DISP_AV_BUF_5BIT_SF,
> };
>
> +static const u32 scaling_factors_666[] = {
> + ZYNQMP_DISP_AV_BUF_6BIT_SF,
> + ZYNQMP_DISP_AV_BUF_6BIT_SF,
> + ZYNQMP_DISP_AV_BUF_6BIT_SF,
> +};
> +
> static const u32 scaling_factors_888[] = {
> ZYNQMP_DISP_AV_BUF_8BIT_SF,
> ZYNQMP_DISP_AV_BUF_8BIT_SF,
> @@ -364,6 +373,41 @@ static const struct zynqmp_disp_format avbuf_gfx_fmts[] = {
> },
> };
>
> +/* List of live video layer formats */
> +static const struct zynqmp_disp_format avbuf_live_fmts[] = {
> + {
> + .drm_fmt = DRM_FORMAT_RGB565,
> + .bus_fmt = MEDIA_BUS_FMT_RGB666_1X18,
> + .buf_fmt = ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_BPC_6 |
> + ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_FMT_RGB,
> + .sf = scaling_factors_666,
> + }, {
> + .drm_fmt = DRM_FORMAT_RGB888,
> + .bus_fmt = MEDIA_BUS_FMT_RGB888_1X24,
> + .buf_fmt = ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_BPC_8 |
> + ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_FMT_RGB,
> + .sf = scaling_factors_888,
> + }, {
> + .drm_fmt = DRM_FORMAT_YUV422,
> + .bus_fmt = MEDIA_BUS_FMT_UYVY8_1X16,
> + .buf_fmt = ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_BPC_8 |
> + ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_FMT_YUV422,
> + .sf = scaling_factors_888,
> + }, {
> + .drm_fmt = DRM_FORMAT_YUV444,
> + .bus_fmt = MEDIA_BUS_FMT_VUY8_1X24,
> + .buf_fmt = ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_BPC_8 |
> + ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_FMT_YUV444,
> + .sf = scaling_factors_888,
> + }, {
> + .drm_fmt = DRM_FORMAT_P210,
> + .bus_fmt = MEDIA_BUS_FMT_UYVY10_1X20,
> + .buf_fmt = ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_BPC_10 |
> + ZYNQMP_DISP_AV_BUF_LIVE_CONFIG_FMT_YUV422,
> + .sf = scaling_factors_101010,
> + },
> +};
> +
> static u32 zynqmp_disp_avbuf_read(struct zynqmp_disp *disp, int reg)
> {
> return readl(disp->avbuf.base + reg);
> @@ -883,16 +927,17 @@ zynqmp_disp_layer_find_format(struct zynqmp_disp_layer *layer,
> }
>
> /**
> - * zynqmp_disp_layer_drm_formats - Return the DRM formats supported by the layer
> + * zynqmp_disp_layer_formats - Return DRM or media bus formats supported by
> + * the layer
> * @layer: The layer
> * @num_formats: Pointer to the returned number of formats
> *
> - * Return: A newly allocated u32 array that stores all the DRM formats
> + * Return: A newly allocated u32 array that stores all DRM or media bus formats
> * supported by the layer. The number of formats in the array is returned
> * through the num_formats argument.
> */
> -u32 *zynqmp_disp_layer_drm_formats(struct zynqmp_disp_layer *layer,
> - unsigned int *num_formats)
> +u32 *zynqmp_disp_layer_formats(struct zynqmp_disp_layer *layer,
> + unsigned int *num_formats)
> {
> unsigned int i;
> u32 *formats;
> @@ -903,7 +948,9 @@ u32 *zynqmp_disp_layer_drm_formats(struct zynqmp_disp_layer *layer,
> return NULL;
>
> for (i = 0; i < layer->info->num_formats; ++i)
> - formats[i] = layer->info->formats[i].drm_fmt;
> + formats[i] = layer->mode == ZYNQMP_DPSUB_LAYER_NONLIVE
> + ? layer->info->formats[i].drm_fmt
> + : layer->info->formats[i].bus_fmt;
I find this quite confusing. Depending on the layer mode, you return
different format types. I think it's quite easy to use this kind of
function the wrong way.
Why not just make two separate functions?
Tomi
> *num_formats = layer->info->num_formats;
> return formats;
> @@ -1131,6 +1178,11 @@ static int zynqmp_disp_create_layers(struct zynqmp_disp *disp)
> .num_channels = 1,
> },
> };
> + static const struct zynqmp_disp_layer_info live_layer_info = {
> + .formats = avbuf_live_fmts,
> + .num_formats = ARRAY_SIZE(avbuf_live_fmts),
> + .num_channels = 0,
> + };
>
> unsigned int i;
> int ret;
> @@ -1140,12 +1192,18 @@ static int zynqmp_disp_create_layers(struct zynqmp_disp *disp)
>
> layer->id = i;
> layer->disp = disp;
> - layer->info = &layer_info[i];
> - /* For now assume dpsub works in either live or non-live mode for both layers.
> +
> + /*
> + * For now assume dpsub works in either live or non-live mode for both layers.
> * Hybrid mode is not supported yet.
> */
> - layer->mode = disp->dpsub->dma_enabled ? ZYNQMP_DPSUB_LAYER_NONLIVE
> - : ZYNQMP_DPSUB_LAYER_LIVE;
> + if (disp->dpsub->dma_enabled) {
> + layer->mode = ZYNQMP_DPSUB_LAYER_NONLIVE;
> + layer->info = &layer_info[i];
> + } else {
> + layer->mode = ZYNQMP_DPSUB_LAYER_LIVE;
> + layer->info = &live_layer_info;
> + }
>
> ret = zynqmp_disp_layer_request_dma(disp, layer);
> if (ret)
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_disp.h b/drivers/gpu/drm/xlnx/zynqmp_disp.h
> index 9b8b202224d9..88c285a12e23 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_disp.h
> +++ b/drivers/gpu/drm/xlnx/zynqmp_disp.h
> @@ -50,8 +50,8 @@ int zynqmp_disp_setup_clock(struct zynqmp_disp *disp,
> void zynqmp_disp_blend_set_global_alpha(struct zynqmp_disp *disp,
> bool enable, u32 alpha);
>
> -u32 *zynqmp_disp_layer_drm_formats(struct zynqmp_disp_layer *layer,
> - unsigned int *num_formats);
> +u32 *zynqmp_disp_layer_formats(struct zynqmp_disp_layer *layer,
> + unsigned int *num_formats);
> void zynqmp_disp_layer_enable(struct zynqmp_disp_layer *layer);
> void zynqmp_disp_layer_disable(struct zynqmp_disp_layer *layer);
> void zynqmp_disp_layer_set_format(struct zynqmp_disp_layer *layer,
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_dp.c b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> index 4faafdd76798..e3b9eb3d9273 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_dp.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_dp.c
> @@ -22,6 +22,7 @@
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/io.h>
> +#include <linux/media-bus-format.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> @@ -1577,6 +1578,35 @@ static const struct drm_edid *zynqmp_dp_bridge_edid_read(struct drm_bridge *brid
> return drm_edid_read_ddc(connector, &dp->aux.ddc);
> }
>
> +static u32 *zynqmp_dp_bridge_default_bus_fmts(unsigned int *num_input_fmts)
> +{
> + u32 *formats = kzalloc(sizeof(*formats), GFP_KERNEL);
> +
> + if (formats)
> + *formats = MEDIA_BUS_FMT_FIXED;
> + *num_input_fmts = !!formats;
> +
> + return formats;
> +}
> +
> +static u32 *
> +zynqmp_dp_bridge_get_input_bus_fmts(struct drm_bridge *bridge,
> + struct drm_bridge_state *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state *conn_state,
> + u32 output_fmt,
> + unsigned int *num_input_fmts)
> +{
> + struct zynqmp_dp *dp = bridge_to_dp(bridge);
> + struct zynqmp_disp_layer *layer;
> +
> + layer = zynqmp_dp_disp_connected_live_layer(dp);
> + if (layer)
> + return zynqmp_disp_layer_formats(layer, num_input_fmts);
> + else
> + return zynqmp_dp_bridge_default_bus_fmts(num_input_fmts);
> +}
> +
> static const struct drm_bridge_funcs zynqmp_dp_bridge_funcs = {
> .attach = zynqmp_dp_bridge_attach,
> .detach = zynqmp_dp_bridge_detach,
> @@ -1589,6 +1619,7 @@ static const struct drm_bridge_funcs zynqmp_dp_bridge_funcs = {
> .atomic_check = zynqmp_dp_bridge_atomic_check,
> .detect = zynqmp_dp_bridge_detect,
> .edid_read = zynqmp_dp_bridge_edid_read,
> + .atomic_get_input_bus_fmts = zynqmp_dp_bridge_get_input_bus_fmts,
> };
>
> /* -----------------------------------------------------------------------------
> diff --git a/drivers/gpu/drm/xlnx/zynqmp_kms.c b/drivers/gpu/drm/xlnx/zynqmp_kms.c
> index 43bf416b33d5..bf9fba01df0e 100644
> --- a/drivers/gpu/drm/xlnx/zynqmp_kms.c
> +++ b/drivers/gpu/drm/xlnx/zynqmp_kms.c
> @@ -152,7 +152,7 @@ static int zynqmp_dpsub_create_planes(struct zynqmp_dpsub *dpsub)
> unsigned int num_formats;
> u32 *formats;
>
> - formats = zynqmp_disp_layer_drm_formats(layer, &num_formats);
> + formats = zynqmp_disp_layer_formats(layer, &num_formats);
> if (!formats)
> return -ENOMEM;
>
>
next prev parent reply other threads:[~2024-04-05 12:39 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-21 20:43 [PATCH v3 0/9] Setting live video input format for ZynqMP DPSUB Anatoliy Klymenko
2024-03-21 20:43 ` [PATCH v3 1/9] drm: xlnx: zynqmp_dpsub: Set layer mode during creation Anatoliy Klymenko
2024-04-05 12:06 ` Tomi Valkeinen
2024-04-05 12:31 ` Tomi Valkeinen
2024-04-08 18:21 ` Klymenko, Anatoliy
2024-03-21 20:43 ` [PATCH v3 2/9] drm: xlnx: zynqmp_dpsub: Update live format defines Anatoliy Klymenko
2024-04-05 12:10 ` Tomi Valkeinen
2024-04-08 18:17 ` Klymenko, Anatoliy
2024-03-21 20:43 ` [PATCH v3 3/9] drm: xlnx: zynqmp_dpsub: Add connected live layer helper Anatoliy Klymenko
2024-04-05 12:12 ` Tomi Valkeinen
2024-03-21 20:43 ` [PATCH v3 4/9] drm: xlnx: zynqmp_dpsub: Anounce supported input formats Anatoliy Klymenko
2024-04-05 12:39 ` Tomi Valkeinen [this message]
2024-03-21 20:43 ` [PATCH v3 5/9] drm: xlnx: zynqmp_dpsub: Minimize usage of global flag Anatoliy Klymenko
2024-04-05 12:42 ` Tomi Valkeinen
2024-03-21 20:43 ` [PATCH v3 6/9] drm: xlnx: zynqmp_dpsub: Set input live format Anatoliy Klymenko
2024-04-05 12:56 ` Tomi Valkeinen
2024-03-21 20:43 ` [PATCH v3 7/9] drm/atomic-helper: Add select_output_bus_format callback Anatoliy Klymenko
2024-03-22 9:44 ` Maxime Ripard
2024-03-22 19:15 ` Klymenko, Anatoliy
2024-03-21 20:43 ` [PATCH v3 8/9] dt-bindings: xlnx: Add VTC and TPG bindings Anatoliy Klymenko
2024-03-21 22:25 ` Rob Herring
2024-03-22 5:57 ` Krzysztof Kozlowski
2024-03-22 5:59 ` Krzysztof Kozlowski
2024-03-22 18:05 ` Conor Dooley
2024-03-23 10:22 ` Krzysztof Kozlowski
2024-03-23 19:08 ` Conor Dooley
2024-03-22 19:12 ` Klymenko, Anatoliy
2024-03-23 10:20 ` Krzysztof Kozlowski
2024-03-29 0:38 ` Klymenko, Anatoliy
2024-03-29 15:46 ` Conor Dooley
2024-03-30 2:02 ` Klymenko, Anatoliy
2024-03-30 9:27 ` Krzysztof Kozlowski
2024-03-21 20:43 ` [PATCH v3 9/9] drm: xlnx: Intoduce TPG CRTC driver Anatoliy Klymenko
2024-03-23 10:19 ` [PATCH v3 0/9] Setting live video input format for ZynqMP DPSUB Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0179c94f-88c1-4b54-8a61-2834f35325ec@ideasonboard.com \
--to=tomi.valkeinen@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=anatoliy.klymenko@amd.com \
--cc=andrzej.hajda@intel.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mchehab@kernel.org \
--cc=michal.simek@amd.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=robh+dt@kernel.org \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®