From: "Curt" <cfiene@cybermetrix.com>
To: <linux-kernel@vger.kernel.org>
Subject: PROBLEM: handling 4G+ files
Date: Mon, 22 Mar 2004 14:44:07 -0500 [thread overview]
Message-ID: <01bb01c41046$0a1f8710$1c30d0ce@cybermetrix.com> (raw)
I received the following kernel error while copying a file a little than 4G
from one system to another (using scp). This happened last week after the
kernel upgrade, but a re-try was successful.
Mar 22 13:18:28 tapesys kernel: ------------[ cut here ]------------
Mar 22 13:18:28 tapesys kernel: kernel BUG at filemap.c:3264!
Mar 22 13:18:28 tapesys kernel: invalid operand: 0000
Mar 22 13:18:28 tapesys kernel: nfs lockd sunrpc iptable_filter ip_tables
via-rhine mii st keybdev mousedev hid input usb-uhci usbcore aic7xxx sd_mod
scsi_mod
Mar 22 13:18:28 tapesys kernel: CPU: 0
Mar 22 13:18:28 tapesys kernel: EIP: 0060:[<c013130d>] Not tainted
Mar 22 13:18:28 tapesys kernel: EFLAGS: 00010246
Mar 22 13:18:28 tapesys kernel:
Mar 22 13:18:28 tapesys kernel: EIP is at generic_file_write [kernel] 0x3bd
(2.4.20-30.9)
Mar 22 13:18:28 tapesys kernel: eax: 00000000 ebx: 00001000 ecx:
c1029930 edx: c1029914
Mar 22 13:18:28 tapesys kernel: esi: c1029914 edi: c1029914 ebp:
08050c40 esp: c3009f48
Mar 22 13:18:28 tapesys kernel: ds: 0068 es: 0068 ss: 0068
Mar 22 13:18:28 tapesys kernel: Process scp (pid: 24008, stackpage=c3009000)
Mar 22 13:18:28 tapesys kernel: Stack: ffffffff c3008000 00000000 c1275190
c1029914 00000001 00000000 c1be44cc
Mar 22 13:18:28 tapesys kernel: 00001000 fffffff4 00000000 08162000
00000000 c1be4460 c1be4508 00000000
Mar 22 13:18:28 tapesys kernel: f1001000 08050c40 c3ac6740 ffffffea
00001000 c0140375 c3ac6740 08050c40
Mar 22 13:18:28 tapesys kernel: Call Trace: [<c0140375>] sys_write
[kernel] 0x85 (0xc3009f9c))
Mar 22 13:18:28 tapesys kernel: [<c0109103>] system_call [kernel] 0x33
(0xc3009fc0))
Mar 22 13:18:28 tapesys kernel:
Mar 22 13:18:28 tapesys kernel:
Mar 22 13:18:28 tapesys kernel: Code: 0f 0b c0 0c 52 1c 24 c0 8b 4c 24 10 31
c0 8b 7c 24 20 8a 41
/proc/version
Linux version 2.4.20-30.9 (bhcompile@daffy.perf.redhat.com) (gcc version
3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Wed Feb 4 20:45:57 EST 2004
/proc/cpuinfo
processor : 0
vendor_id : CyrixInstead
cpu family : 5
model : 4
model name : 6x86L 2x Core/Bus Clock
stepping : 2
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : yes
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu de cx8 cyrix_arr
bogomips : 149.91
lsmod
Module Size Used by Not tainted
nfs 74424 1 (autoclean)
lockd 53968 1 (autoclean) [nfs]
sunrpc 77084 1 (autoclean) [nfs lockd]
via-rhine 15344 1
mii 3720 0 [via-rhine]
st 29932 0 (unused)
keybdev 2752 0 (unused)
mousedev 5236 0 (unused)
hid 20868 0 (unused)
input 5632 0 [keybdev mousedev hid]
usb-uhci 24684 0 (unused)
usbcore 73280 1 [hid usb-uhci]
aic7xxx 130932 0 (unused)
sd_mod 13004 0 (unused)
scsi_mod 102968 3 [st aic7xxx sd_mod]
/proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0cf8-0cff : PCI conf1
4000-403f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
5000-501f : Intel Corp. 82371AB/EB/MB PIIX4 ACPI
6400-64ff : Adaptec AIC-7861
6800-687f : VIA Technologies, Inc. VT86C100A [Rhine]
6800-687f : via-rhine
6900-691f : Intel Corp. 82371AB/EB/MB PIIX4 USB
6900-691f : usb-uhci
f000-f00f : Intel Corp. 82371AB/EB/MB PIIX4 IDE
f000-f007 : ide0
f008-f00f : ide1
/proc/iomem
00000000-0009ffff : System RAM
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000c87ff : Extension ROM
000f0000-000fffff : System ROM
00100000-03ffffff : System RAM
00100000-00233f7b : Kernel code
00233f7c-0032d9a3 : Kernel data
e0000000-e07fffff : S3 Inc. 86c764/765 [Trio32/64/64V+]
e0800000-e080007f : VIA Technologies, Inc. VT86C100A [Rhine]
e0800000-e080007f : via-rhine
e0801000-e0801fff : Adaptec AIC-7861
e0801000-e0801fff : aic7xxx
ffff0000-ffffffff : reserved
lspci -vvv
00:00.0 Host bridge: Intel Corp. 430TX - 82439TX MTXC (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 32
00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if
80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Region 4: I/O ports at f000 [size=16]
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at 6900 [size=32]
00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:09.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+]
(prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0b.0 Ethernet controller: VIA Technologies, Inc. VT86C100A [Rhine] (rev
06)
Subsystem: D-Link System Inc DFE-530TX rev A
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (29500ns min, 38000ns max), cache line size 08
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at 6800 [size=128]
Region 1: Memory at e0800000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=64K]
00:0f.0 SCSI storage controller: Adaptec AIC-7861 (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (1000ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 6400 [disabled] [size=256]
Region 1: Memory at e0801000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: HP Model: C1537A Rev: L111
Type: Sequential-Access ANSI SCSI revision: 02
reply other threads:[~2004-03-22 19:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='01bb01c41046$0a1f8710$1c30d0ce@cybermetrix.com' \
--to=cfiene@cybermetrix.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome