From: Kukjin Kim <kgene.kim@samsung.com>
To: "'Denis Kuzmenko'" <linux@solonet.org.ua>,
"'Russell King'" <linux@arm.linux.org.uk>,
"'Ben Dooks'" <ben-linux@fluff.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org
Subject: RE: [PATCH resend2] s3c24xx: cpufreq: Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.
Date: Tue, 06 Dec 2011 20:31:15 +0900 [thread overview]
Message-ID: <02ef01ccb40a$9078f2e0$b16ad8a0$%kim@samsung.com> (raw)
In-Reply-To: <4EDD720B.5040607@solonet.org.ua>
Denis Kuzmenko wrote:
>
> Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.
>
> Signed-off-by: Denis Kuzmenko <linux@solonet.org.ua>
> ---
>
> Patch is against 3.2-rc3.
> CONFIG_S3C2410_IOTIMING wasn't present in Kconfig but was referenced by
> Makefile. Because of this the file s3c2410-iotiming.c was not ever
> compiled
Well, there is 'S3C2410_IOTIMING' at arch/arm/plat-s3c24xx/Kconfig and it
had dependency of 'CONFIG_CPU_FREQ_S3C24XX'...
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
> and enabling CONFIG_CPU_FREQ_S3C24XX_DEBUGFS option caused undefined
> reference to function s3c2410_iotiming_debugfs defined in that file.
>
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 44789ef..81d7025 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -2104,9 +2104,31 @@ config CPU_FREQ_S3C24XX_DEBUG
> help
> Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
> +config S3C2410_IOTIMING
> + bool "CPUfreq iotiming for Samsung S3C2410 series CPUs"
> + depends on ARCH_S3C2410 && CPU_FREQ && CPU_FREQ_S3C24XX &&
> EXPERIMENTAL
> + help
> + This enables the CPUfreq driver for the Samsung S3C24XX to change
> + IO timing according to the CPU frequency.
> +
> + For details, take a look at <file:Documentation/cpu-freq>.
> +
> + If in doubt, say Y.
> +
> +config S3C2412_IOTIMING
> + bool "CPUfreq iotiming for Samsung S3C2412 series CPUs"
> + depends on ARCH_S3C2412 && CPU_FREQ && CPU_FREQ_S3C24XX &&
> EXPERIMENTAL
> + help
> + This enables the CPUfreq driver for the Samsung S3C2412 to change
> + IO timing according to the CPU frequency.
> +
> + For details, take a look at <file:Documentation/cpu-freq>.
> +
> + If in doubt, say Y.
> +
> config CPU_FREQ_S3C24XX_IODEBUG
> bool "Debug CPUfreq Samsung driver IO timing"
> - depends on CPU_FREQ_S3C24XX
> + depends on CPU_FREQ_S3C24XX && (S3C2410_IOTIMING ||
> S3C2412_IOTIMING)
> help
> Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
> diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
> b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
> index dac4760..c465252 100644
> --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
> +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
> @@ -202,13 +202,23 @@ extern int s3c_plltab_register(struct
> cpufreq_frequency_table *plls,
> extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void);
> extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void);
> -extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
> - struct s3c_cpufreq_config *cfg,
> - union s3c_iobank *iob);
> -
> -extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
> - struct s3c_cpufreq_config *cfg,
> - union s3c_iobank *iob);
> +#ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
> + #ifdef CONFIG_S3C2410_IOTIMING
> + extern void s3c2410_iotiming_debugfs(struct seq_file *seq,
> + struct s3c_cpufreq_config *cfg,
> + union s3c_iobank *iob);
> + #else
> + #define s3c2410_iotiming_debugfs NULL
> + #endif
> +
> + #ifdef CONFIG_S3C2412_IOTIMING
> + extern void s3c2412_iotiming_debugfs(struct seq_file *seq,
> + struct s3c_cpufreq_config *cfg,
> + union s3c_iobank *iob);
> + #else
> + #define s3c2412_iotiming_debugfs NULL
> + #endif
> +#endif
> #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUGFS
> #define s3c_cpufreq_debugfs_call(x) x
> @@ -241,10 +251,7 @@ extern void s3c2410_iotiming_set(struct
> s3c_cpufreq_config *cfg,
> #endif /* CONFIG_S3C2410_IOTIMING */
> /* S3C2412 compatible routines */
> -
> -extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
> - struct s3c_iotimings *timings);
> -
> +#ifdef CONFIG_S3C2412_IOTIMING
> extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
> struct s3c_iotimings *timings);
> @@ -253,6 +260,11 @@ extern int s3c2412_iotiming_calc(struct
> s3c_cpufreq_config *cfg,
> extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
> struct s3c_iotimings *iot);
> +#else
> +#define s3c2412_iotiming_calc NULL
> +#define s3c2412_iotiming_get NULL
> +#define s3c2412_iotiming_set NULL
> +#endif
> #ifdef CONFIG_CPU_FREQ_S3C24XX_DEBUG
> #define s3c_freq_dbg(x...) printk(KERN_INFO x)
next prev parent reply other threads:[~2011-12-06 11:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-06 1:38 Denis Kuzmenko
2011-12-06 11:31 ` Kukjin Kim [this message]
2011-12-06 23:26 ` Denis Kuzmenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='02ef01ccb40a$9078f2e0$b16ad8a0$%kim@samsung.com' \
--to=kgene.kim@samsung.com \
--cc=ben-linux@fluff.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=linux@solonet.org.ua \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
Powered by JetHome