mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Rishikesh Donadkar <r-donadkar@ti.com>
To: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: <y-abhilashchandra@ti.com>, <devarsht@ti.com>, <s-jain1@ti.com>,
	<vigneshr@ti.com>, <mchehab@kernel.org>, <robh@kernel.org>,
	<krzk+dt@kernel.org>, <p.zabel@pengutronix.de>,
	<conor+dt@kernel.org>, <sakari.ailus@linux.intel.com>,
	<hverkuil-cisco@xs4all.nl>, <jai.luthra@ideasonboard.com>,
	<changhuang.liang@starfivetech.com>, <jack.zhu@starfivetech.com>,
	<sjoerd@collabora.com>, <dan.carpenter@linaro.org>,
	<hverkuil+cisco@kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<jai.luthra@linux.dev>, <laurent.pinchart@ideasonboard.com>,
	<mripard@kernel.org>
Subject: Re: [PATCH v9 06/19] media: ti: j721e-csi2rx: add a subdev for the core device
Date: Wed, 21 Jan 2026 14:40:01 +0530	[thread overview]
Message-ID: <0380bf01-a4c8-4a98-b2e0-4fe5bace45ae@ti.com> (raw)
In-Reply-To: <ee8152c0-daf5-48dd-a2d1-2fafcfeca797@ideasonboard.com>


On 14/01/26 20:51, Tomi Valkeinen wrote:
> Hi,

Hi Tomi,

Thank you for the review !

>
> On 30/12/2025 10:32, Rishikesh Donadkar wrote:
>> From: Jai Luthra <j-luthra@ti.com>
>>
>> With single stream capture, it was simpler to use the video device as
>> the media entity representing the main TI CSI2RX device. Now with multi
>> stream capture coming into the picture, the model has shifted to each
>> video device having a link to the main device's subdev. The routing
>> would then be set on this subdev.
>>
>> Add this subdev, link each context to this subdev's entity and link the
>> subdev's entity to the source. Also add an array of media pads. It will
>> have one sink pad and source pads equal to the number of contexts.
>>
>> Support the new enable_stream()/disable_stream() APIs in the subdev
>> instead of s_stream() hook.
>>
>> Reviewed-by: Yemike Abhilash Chandra <y-abhilashchandra@ti.com>
>> Co-developed-by: Pratyush Yadav <p.yadav@ti.com>
>> Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
>> Signed-off-by: Jai Luthra <j-luthra@ti.com>
>> Signed-off-by: Rishikesh Donadkar <r-donadkar@ti.com>
>> ---
>>   .../platform/ti/j721e-csi2rx/j721e-csi2rx.c   | 292 +++++++++++++++---
>>   1 file changed, 248 insertions(+), 44 deletions(-)
>>
>> diff --git a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
>> index f66d68edcd57a..8f49ea2638585 100644
>> --- a/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
>> +++ b/drivers/media/platform/ti/j721e-csi2rx/j721e-csi2rx.c
>> @@ -54,6 +54,11 @@
>>   #define MAX_WIDTH_BYTES			SZ_16K
>>   #define MAX_HEIGHT_LINES		SZ_16K
>>   
>> +#define TI_CSI2RX_PAD_SINK		0
>> +#define TI_CSI2RX_PAD_FIRST_SOURCE	1
>> +#define TI_CSI2RX_NUM_SOURCE_PADS	1
>> +#define TI_CSI2RX_NUM_PADS		(1 + TI_CSI2RX_NUM_SOURCE_PADS)
>> +
>>   #define DRAIN_TIMEOUT_MS		50
>>   #define DRAIN_BUFFER_SIZE		SZ_32K
>>   
>> @@ -102,6 +107,7 @@ struct ti_csi2rx_ctx {
>>   	struct mutex			mutex; /* To serialize ioctls. */
>>   	struct v4l2_format		v_fmt;
>>   	struct ti_csi2rx_dma		dma;
>> +	struct media_pad		pad;
>>   	u32				sequence;
>>   	u32				idx;
>>   };
>> @@ -109,12 +115,15 @@ struct ti_csi2rx_ctx {
>>   struct ti_csi2rx_dev {
>>   	struct device			*dev;
>>   	void __iomem			*shim;
>> +	struct mutex			mutex; /* To serialize ioctls. */
> The mutex is not used (in this patch at least).


Yes, now since in the later patches that add multi stream support, we 
access all the shared variables in the enable/disable_streams call which 
are serialized by the framework, I think this mutex is note required. I 
will remove it entirely.

Rishikesh

>
>> +	unsigned int			enable_count;
>>   	struct v4l2_device		v4l2_dev;
>>   	struct media_device		mdev;
>>   	struct media_pipeline		pipe;
>> -	struct media_pad		pad;
>> +	struct media_pad		pads[TI_CSI2RX_NUM_PADS];
>>   	struct v4l2_async_notifier	notifier;
>>   	struct v4l2_subdev		*source;
>> +	struct v4l2_subdev		subdev;
>>   	struct ti_csi2rx_ctx		ctx[TI_CSI2RX_NUM_CTX];
>>   	u8				pix_per_clk;
>>   	/* Buffer to drain stale data from PSI-L endpoint */
>> @@ -125,6 +134,22 @@ struct ti_csi2rx_dev {
>>   	} drain;
>>   };
>>   
>> +static inline struct ti_csi2rx_dev *to_csi2rx_dev(struct v4l2_subdev *sd)
>> +{
>> +	return container_of(sd, struct ti_csi2rx_dev, subdev);
>> +}
>> +
>> +static const struct v4l2_mbus_framefmt ti_csi2rx_default_fmt = {
>> +	.width = 640,
>> +	.height = 480,
>> +	.code = MEDIA_BUS_FMT_UYVY8_1X16,
>> +	.field = V4L2_FIELD_NONE,
>> +	.colorspace = V4L2_COLORSPACE_SRGB,
>> +	.ycbcr_enc = V4L2_YCBCR_ENC_601,
>> +	.quantization = V4L2_QUANTIZATION_LIM_RANGE,
>> +	.xfer_func = V4L2_XFER_FUNC_SRGB,
>> +};
>> +
>>   static const struct ti_csi2rx_fmt ti_csi2rx_formats[] = {
>>   	{
>>   		.fourcc			= V4L2_PIX_FMT_YUYV,
>> @@ -422,6 +447,18 @@ static int csi_async_notifier_complete(struct v4l2_async_notifier *notifier)
>>   	struct ti_csi2rx_dev *csi = dev_get_drvdata(notifier->v4l2_dev->dev);
>>   	int ret, i;
>>   
>> +	/* Create link from source to subdev */
>> +	ret = media_create_pad_link(&csi->source->entity,
>> +				    CSI2RX_BRIDGE_SOURCE_PAD,
>> +				    &csi->subdev.entity,
>> +				    TI_CSI2RX_PAD_SINK,
>> +				    MEDIA_LNK_FL_IMMUTABLE |
>> +				    MEDIA_LNK_FL_ENABLED);
>> +
>> +	if (ret)
>> +		return ret;
>> +
>> +	/* Create and link video nodes for all DMA contexts */
>>   	for (i = 0; i < TI_CSI2RX_NUM_CTX; i++) {
>>   		struct ti_csi2rx_ctx *ctx = &csi->ctx[i];
>>   		struct video_device *vdev = &ctx->vdev;
>> @@ -429,15 +466,17 @@ static int csi_async_notifier_complete(struct v4l2_async_notifier *notifier)
>>   		ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
>>   		if (ret)
>>   			goto unregister_dev;
>> -	}
>>   
>> -	ret = media_create_pad_link(&csi->source->entity,
>> -				    CSI2RX_BRIDGE_SOURCE_PAD,
>> -				    &csi->ctx[0].vdev.entity, csi->pad.index,
>> -				    MEDIA_LNK_FL_IMMUTABLE |
>> -				    MEDIA_LNK_FL_ENABLED);
>> -	if (ret)
>> -		goto unregister_dev;
>> +		ret = media_create_pad_link(&csi->subdev.entity,
>> +					    TI_CSI2RX_PAD_FIRST_SOURCE + ctx->idx,
>> +					    &vdev->entity, 0,
>> +					    MEDIA_LNK_FL_IMMUTABLE |
>> +					    MEDIA_LNK_FL_ENABLED);
>> +		if (ret) {
>> +			video_unregister_device(vdev);
>> +			goto unregister_dev;
>> +		}
>> +	}
>>   
>>   	ret = v4l2_device_register_subdev_nodes(&csi->v4l2_dev);
>>   	if (ret)
>> @@ -447,8 +486,10 @@ static int csi_async_notifier_complete(struct v4l2_async_notifier *notifier)
>>   
>>   unregister_dev:
>>   	i--;
>> -	for (; i >= 0; i--)
>> +	for (; i >= 0; i--) {
>> +		media_entity_remove_links(&csi->ctx[i].vdev.entity);
>>   		video_unregister_device(&csi->ctx[i].vdev);
>> +	}
>>   	return ret;
>>   }
>>   
>> @@ -493,14 +534,13 @@ static int ti_csi2rx_notifier_register(struct ti_csi2rx_dev *csi)
>>   }
>>   
>>   /* Request maximum possible pixels per clock from the bridge */
>> -static void ti_csi2rx_request_max_ppc(struct ti_csi2rx_ctx *ctx)
>> +static void ti_csi2rx_request_max_ppc(struct ti_csi2rx_dev *csi)
>>   {
>> -	struct ti_csi2rx_dev *csi = ctx->csi;
>>   	u8 ppc = TI_CSI2RX_MAX_PIX_PER_CLK;
>>   	struct media_pad *pad;
>>   	int ret;
>>   
>> -	pad = media_entity_remote_source_pad_unique(&ctx->vdev.entity);
>> +	pad = media_entity_remote_source_pad_unique(&csi->subdev.entity);
>>   	if (IS_ERR(pad))
>>   		return;
>>   
>> @@ -526,7 +566,7 @@ static void ti_csi2rx_setup_shim(struct ti_csi2rx_ctx *ctx)
>>   	writel(reg, csi->shim + SHIM_CNTL);
>>   
>>   	/* Negotiate pixel count from the source */
>> -	ti_csi2rx_request_max_ppc(ctx);
>> +	ti_csi2rx_request_max_ppc(csi);
>>   
>>   	reg = SHIM_DMACNTX_EN;
>>   	reg |= FIELD_PREP(SHIM_DMACNTX_FMT, fmt->csi_dt);
>> @@ -881,7 +921,9 @@ static int ti_csi2rx_start_streaming(struct vb2_queue *vq, unsigned int count)
>>   	dma->state = TI_CSI2RX_DMA_ACTIVE;
>>   	spin_unlock_irqrestore(&dma->lock, flags);
>>   
>> -	ret = v4l2_subdev_call(csi->source, video, s_stream, 1);
>> +	ret = v4l2_subdev_enable_streams(&csi->subdev,
>> +					 TI_CSI2RX_PAD_FIRST_SOURCE,
>> +					 BIT_U64(0));
>>   	if (ret)
>>   		goto err_dma;
>>   
>> @@ -909,7 +951,9 @@ static void ti_csi2rx_stop_streaming(struct vb2_queue *vq)
>>   	writel(0, csi->shim + SHIM_CNTL);
>>   	writel(0, csi->shim + SHIM_DMACNTX(ctx->idx));
>>   
>> -	ret = v4l2_subdev_call(csi->source, video, s_stream, 0);
>> +	ret = v4l2_subdev_disable_streams(&csi->subdev,
>> +					  TI_CSI2RX_PAD_FIRST_SOURCE,
>> +					  BIT_U64(0));
>>   	if (ret)
>>   		dev_err(csi->dev, "Failed to stop subdev stream\n");
>>   
>> @@ -925,8 +969,121 @@ static const struct vb2_ops csi_vb2_qops = {
>>   	.stop_streaming = ti_csi2rx_stop_streaming,
>>   };
>>   
>> +static int ti_csi2rx_enum_mbus_code(struct v4l2_subdev *subdev,
>> +				    struct v4l2_subdev_state *state,
>> +				    struct v4l2_subdev_mbus_code_enum *code_enum)
>> +{
>> +	if (code_enum->index >= ARRAY_SIZE(ti_csi2rx_formats))
>> +		return -EINVAL;
>> +
>> +	code_enum->code = ti_csi2rx_formats[code_enum->index].code;
>> +
>> +	return 0;
>> +}
>> +
>> +static int ti_csi2rx_sd_set_fmt(struct v4l2_subdev *sd,
>> +				struct v4l2_subdev_state *state,
>> +				struct v4l2_subdev_format *format)
>> +{
>> +	struct v4l2_mbus_framefmt *fmt;
>> +
>> +	/* No transcoding, don't allow setting source fmt */
>> +	if (format->pad > TI_CSI2RX_PAD_SINK)
>> +		return v4l2_subdev_get_fmt(sd, state, format);
>> +
>> +	if (!find_format_by_code(format->format.code))
>> +		format->format.code = ti_csi2rx_formats[0].code;
>> +
>> +	format->format.field = V4L2_FIELD_NONE;
>> +
>> +	fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
>> +	*fmt = format->format;
>> +
>> +	fmt = v4l2_subdev_state_get_format(state, TI_CSI2RX_PAD_FIRST_SOURCE,
>> +					   format->stream);
>> +	*fmt = format->format;
>> +
>> +	return 0;
>> +}
>> +
>> +static int ti_csi2rx_sd_init_state(struct v4l2_subdev *sd,
>> +				   struct v4l2_subdev_state *state)
>> +{
>> +	struct v4l2_mbus_framefmt *fmt;
>> +
>> +	fmt = v4l2_subdev_state_get_format(state, TI_CSI2RX_PAD_SINK);
>> +	*fmt = ti_csi2rx_default_fmt;
>> +
>> +	fmt = v4l2_subdev_state_get_format(state, TI_CSI2RX_PAD_FIRST_SOURCE);
>> +	*fmt = ti_csi2rx_default_fmt;
>> +
>> +	return 0;
>> +}
>> +
>> +static int ti_csi2rx_sd_enable_streams(struct v4l2_subdev *sd,
>> +				       struct v4l2_subdev_state *state,
>> +				       u32 pad, u64 streams_mask)
>> +{
>> +	struct ti_csi2rx_dev *csi = to_csi2rx_dev(sd);
>> +	struct media_pad *remote_pad;
>> +	int ret = 0;
>> +
>> +	remote_pad = media_entity_remote_source_pad_unique(&csi->subdev.entity);
>> +	if (!remote_pad)
>> +		return -ENODEV;
>> +
>> +	ret = v4l2_subdev_enable_streams(csi->source, remote_pad->index,
>> +					 BIT_U64(0));
>> +	if (ret)
>> +		return ret;
>> +
>> +	csi->enable_count++;
>> +
>> +	return 0;
>> +}
>> +
>> +static int ti_csi2rx_sd_disable_streams(struct v4l2_subdev *sd,
>> +					struct v4l2_subdev_state *state,
>> +					u32 pad, u64 streams_mask)
>> +{
>> +	struct ti_csi2rx_dev *csi = to_csi2rx_dev(sd);
>> +	struct media_pad *remote_pad;
>> +	int ret = 0;
>> +
>> +	remote_pad = media_entity_remote_source_pad_unique(&csi->subdev.entity);
>> +	if (!remote_pad)
>> +		return -ENODEV;
>> +
>> +	if (csi->enable_count == 0)
>> +		return -EINVAL;
>> +
>> +	ret = v4l2_subdev_disable_streams(csi->source, remote_pad->index,
>> +					  BIT_U64(0));
>> +	if (!ret)
>> +		--csi->enable_count;
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct v4l2_subdev_pad_ops ti_csi2rx_subdev_pad_ops = {
>> +	.enum_mbus_code	= ti_csi2rx_enum_mbus_code,
>> +	.get_fmt = v4l2_subdev_get_fmt,
>> +	.set_fmt = ti_csi2rx_sd_set_fmt,
>> +	.enable_streams = ti_csi2rx_sd_enable_streams,
>> +	.disable_streams = ti_csi2rx_sd_disable_streams,
>> +};
>> +
>> +static const struct v4l2_subdev_ops ti_csi2rx_subdev_ops = {
>> +	.pad = &ti_csi2rx_subdev_pad_ops,
>> +};
>> +
>> +static const struct v4l2_subdev_internal_ops ti_csi2rx_internal_ops = {
>> +	.init_state = ti_csi2rx_sd_init_state,
>> +};
>> +
>>   static void ti_csi2rx_cleanup_v4l2(struct ti_csi2rx_dev *csi)
>>   {
>> +	v4l2_subdev_cleanup(&csi->subdev);
>>   	media_device_unregister(&csi->mdev);
>>   	v4l2_device_unregister(&csi->v4l2_dev);
>>   	media_device_cleanup(&csi->mdev);
>> @@ -981,48 +1138,52 @@ static int ti_csi2rx_link_validate(struct media_link *link)
>>   	struct ti_csi2rx_ctx *ctx = container_of(vdev, struct ti_csi2rx_ctx, vdev);
>>   	struct ti_csi2rx_dev *csi = ctx->csi;
>>   	struct v4l2_pix_format *csi_fmt = &ctx->v_fmt.fmt.pix;
>> -	struct v4l2_subdev_format source_fmt = {
>> -		.which	= V4L2_SUBDEV_FORMAT_ACTIVE,
>> -		.pad	= link->source->index,
>> -	};
>> +	struct v4l2_mbus_framefmt *format;
>> +	struct v4l2_subdev_state *state;
>>   	const struct ti_csi2rx_fmt *ti_fmt;
>> -	int ret;
>>   
>> -	ret = v4l2_subdev_call_state_active(csi->source, pad,
>> -					    get_fmt, &source_fmt);
>> -	if (ret)
>> -		return ret;
>> +	state = v4l2_subdev_lock_and_get_active_state(&csi->subdev);
>> +	format = v4l2_subdev_state_get_format(state, link->source->index, 0);
>> +	v4l2_subdev_unlock_state(state);
>>   
>> -	if (source_fmt.format.width != csi_fmt->width) {
>> +	if (!format) {
>> +		dev_dbg(csi->dev,
>> +			"Skipping validation as no format present on \"%s\":%u:0\n",
>> +			link->source->entity->name, link->source->index);
>> +		return 0;
> Isn't this an error?
>
>   Tomi
>
>
>> +	}
>> +
>> +	if (format->width != csi_fmt->width) {
>>   		dev_dbg(csi->dev, "Width does not match (source %u, sink %u)\n",
>> -			source_fmt.format.width, csi_fmt->width);
>> +			format->width, csi_fmt->width);
>>   		return -EPIPE;
>>   	}
>>   
>> -	if (source_fmt.format.height != csi_fmt->height) {
>> +	if (format->height != csi_fmt->height) {
>>   		dev_dbg(csi->dev, "Height does not match (source %u, sink %u)\n",
>> -			source_fmt.format.height, csi_fmt->height);
>> +			format->height, csi_fmt->height);
>>   		return -EPIPE;
>>   	}
>>   
>> -	if (source_fmt.format.field != csi_fmt->field &&
>> +	if (format->field != csi_fmt->field &&
>>   	    csi_fmt->field != V4L2_FIELD_NONE) {
>>   		dev_dbg(csi->dev, "Field does not match (source %u, sink %u)\n",
>> -			source_fmt.format.field, csi_fmt->field);
>> +			format->field, csi_fmt->field);
>>   		return -EPIPE;
>>   	}
>>   
>> -	ti_fmt = find_format_by_code(source_fmt.format.code);
>> +	ti_fmt = find_format_by_code(format->code);
>>   	if (!ti_fmt) {
>>   		dev_dbg(csi->dev, "Media bus format 0x%x not supported\n",
>> -			source_fmt.format.code);
>> +			format->code);
>>   		return -EPIPE;
>>   	}
>>   
>>   	if (ti_fmt->fourcc != csi_fmt->pixelformat) {
>>   		dev_dbg(csi->dev,
>> -			"Cannot transform source fmt 0x%x to sink fmt 0x%x\n",
>> -			ti_fmt->fourcc, csi_fmt->pixelformat);
>> +			"Cannot transform \"%s\":%u format %p4cc to %p4cc\n",
>> +			link->source->entity->name, link->source->index,
>> +			&ti_fmt->fourcc, &csi_fmt->pixelformat);
>>   		return -EPIPE;
>>   	}
>>   
>> @@ -1033,6 +1194,10 @@ static const struct media_entity_operations ti_csi2rx_video_entity_ops = {
>>   	.link_validate = ti_csi2rx_link_validate,
>>   };
>>   
>> +static const struct media_entity_operations ti_csi2rx_subdev_entity_ops = {
>> +	.link_validate = v4l2_subdev_link_validate,
>> +};
>> +
>>   static int ti_csi2rx_init_dma(struct ti_csi2rx_ctx *ctx)
>>   {
>>   	struct dma_slave_config cfg = {
>> @@ -1058,6 +1223,7 @@ static int ti_csi2rx_init_dma(struct ti_csi2rx_ctx *ctx)
>>   static int ti_csi2rx_v4l2_init(struct ti_csi2rx_dev *csi)
>>   {
>>   	struct media_device *mdev = &csi->mdev;
>> +	struct v4l2_subdev *sd = &csi->subdev;
>>   	int ret;
>>   
>>   	mdev->dev = csi->dev;
>> @@ -1070,16 +1236,51 @@ static int ti_csi2rx_v4l2_init(struct ti_csi2rx_dev *csi)
>>   
>>   	ret = v4l2_device_register(csi->dev, &csi->v4l2_dev);
>>   	if (ret)
>> -		return ret;
>> +		goto cleanup_media;
>>   
>>   	ret = media_device_register(mdev);
>> -	if (ret) {
>> -		v4l2_device_unregister(&csi->v4l2_dev);
>> -		media_device_cleanup(mdev);
>> -		return ret;
>> -	}
>> +	if (ret)
>> +		goto unregister_v4l2;
>> +
>> +	v4l2_subdev_init(sd, &ti_csi2rx_subdev_ops);
>> +	sd->internal_ops = &ti_csi2rx_internal_ops;
>> +	sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE;
>> +	sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
>> +	strscpy(sd->name, dev_name(csi->dev), sizeof(sd->name));
>> +	sd->dev = csi->dev;
>> +	sd->entity.ops = &ti_csi2rx_subdev_entity_ops;
>> +
>> +	csi->pads[TI_CSI2RX_PAD_SINK].flags = MEDIA_PAD_FL_SINK;
>> +
>> +	for (unsigned int i = TI_CSI2RX_PAD_FIRST_SOURCE;
>> +	     i < TI_CSI2RX_NUM_PADS; i++)
>> +		csi->pads[i].flags = MEDIA_PAD_FL_SOURCE;
>> +
>> +	ret = media_entity_pads_init(&sd->entity, ARRAY_SIZE(csi->pads),
>> +				     csi->pads);
>> +	if (ret)
>> +		goto unregister_media;
>> +
>> +	ret = v4l2_subdev_init_finalize(sd);
>> +	if (ret)
>> +		goto unregister_media;
>> +
>> +	ret = v4l2_device_register_subdev(&csi->v4l2_dev, sd);
>> +	if (ret)
>> +		goto cleanup_subdev;
>>   
>>   	return 0;
>> +
>> +cleanup_subdev:
>> +	v4l2_subdev_cleanup(sd);
>> +unregister_media:
>> +	media_device_unregister(mdev);
>> +unregister_v4l2:
>> +	v4l2_device_unregister(&csi->v4l2_dev);
>> +cleanup_media:
>> +	media_device_cleanup(mdev);
>> +
>> +	return ret;
>>   }
>>   
>>   static int ti_csi2rx_init_ctx(struct ti_csi2rx_ctx *ctx)
>> @@ -1106,9 +1307,9 @@ static int ti_csi2rx_init_ctx(struct ti_csi2rx_ctx *ctx)
>>   
>>   	ti_csi2rx_fill_fmt(fmt, &ctx->v_fmt);
>>   
>> -	csi->pad.flags = MEDIA_PAD_FL_SINK;
>> +	ctx->pad.flags = MEDIA_PAD_FL_SINK;
>>   	vdev->entity.ops = &ti_csi2rx_video_entity_ops;
>> -	ret = media_entity_pads_init(&ctx->vdev.entity, 1, &csi->pad);
>> +	ret = media_entity_pads_init(&ctx->vdev.entity, 1, &ctx->pad);
>>   	if (ret)
>>   		return ret;
>>   
>> @@ -1169,6 +1370,8 @@ static int ti_csi2rx_probe(struct platform_device *pdev)
>>   	if (!csi->drain.vaddr)
>>   		return -ENOMEM;
>>   
>> +	mutex_init(&csi->mutex);
>> +
>>   	ret = ti_csi2rx_v4l2_init(csi);
>>   	if (ret)
>>   		goto err_v4l2;
>> @@ -1201,6 +1404,7 @@ static int ti_csi2rx_probe(struct platform_device *pdev)
>>   		ti_csi2rx_cleanup_ctx(&csi->ctx[i]);
>>   	ti_csi2rx_cleanup_v4l2(csi);
>>   err_v4l2:
>> +	mutex_destroy(&csi->mutex);
>>   	dma_free_coherent(csi->dev, csi->drain.len, csi->drain.vaddr,
>>   			  csi->drain.paddr);
>>   	return ret;
>> @@ -1216,7 +1420,7 @@ static void ti_csi2rx_remove(struct platform_device *pdev)
>>   
>>   	ti_csi2rx_cleanup_notifier(csi);
>>   	ti_csi2rx_cleanup_v4l2(csi);
>> -
>> +	mutex_destroy(&csi->mutex);
>>   	dma_free_coherent(csi->dev, csi->drain.len, csi->drain.vaddr,
>>   			  csi->drain.paddr);
>>   }
>

  parent reply	other threads:[~2026-01-21  9:10 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-12-30  8:32 [PATCH v9 00/19] media: cadence,ti: CSI2RX Multistream Support Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 01/19] media: ti: j721e-csi2rx: Remove word size alignment on frame width Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 02/19] dt-bindings: media: ti,j721e-csi2rx-shim: Support 32 dma chans Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 03/19] media: ti: j721e-csi2rx: separate out device and context Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 04/19] media: ti: j721e-csi2rx: prepare SHIM code for multiple contexts Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 05/19] media: ti: j721e-csi2rx: allocate DMA channel based on context index Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 06/19] media: ti: j721e-csi2rx: add a subdev for the core device Rishikesh Donadkar
2026-01-14 15:21   ` Tomi Valkeinen
2026-01-15  6:36     ` Jai Luthra
2026-01-15 12:56       ` Tomi Valkeinen
2026-01-20 23:25         ` Laurent Pinchart
2026-01-21  7:38           ` Tomi Valkeinen
2026-01-21 10:52             ` Laurent Pinchart
2026-01-22  6:53               ` Jai Luthra
2026-01-22  9:53                 ` Laurent Pinchart
2026-02-28 17:49                   ` Jai Luthra
2026-01-21  9:10     ` Rishikesh Donadkar [this message]
2025-12-30  8:32 ` [PATCH v9 07/19] media: cadence: csi2rx: Move to .enable/disable_streams API Rishikesh Donadkar
2026-01-14 15:25   ` Tomi Valkeinen
2025-12-30  8:32 ` [PATCH v9 08/19] media: staging: starfive: Move to enabel-disable streams in starfive drivers Rishikesh Donadkar
2026-01-14 12:51   ` Jai Luthra
2026-01-14 13:05     ` Laurent Pinchart
2025-12-30  8:32 ` [PATCH v9 09/19] media: ti: j721e-csi2rx: get number of contexts from device tree Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 10/19] media: cadence: csi2rx: add get_frame_desc wrapper Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 11/19] media: ti: j721e-csi2rx: add support for processing virtual channels Rishikesh Donadkar
2026-01-14 15:31   ` Tomi Valkeinen
2026-01-16 10:28     ` Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 12/19] media: cadence: csi2rx: add multistream support Rishikesh Donadkar
2026-01-15 12:01   ` Tomi Valkeinen
2026-01-16 11:04     ` Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 13/19] media: ti: j721e-csi2rx: " Rishikesh Donadkar
2026-01-15 12:27   ` Tomi Valkeinen
2026-01-20  8:48     ` Rishikesh Donadkar
2026-01-15 12:28   ` Tomi Valkeinen
2026-01-20  8:52     ` Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 14/19] media: ti: j721e-csi2rx: Submit all available buffers Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 15/19] media: ti: j721e-csi2rx: Change the drain architecture for multistream Rishikesh Donadkar
2026-01-15 12:37   ` Tomi Valkeinen
2026-01-15 16:02     ` Jai Luthra
2026-01-16 10:11       ` Vignesh Raghavendra
2026-01-19  5:08       ` Rishikesh Donadkar
2026-01-19  5:04     ` Rishikesh Donadkar
2025-12-30  8:32 ` [PATCH v9 16/19] media: ti: j721e-csi2rx: Return the partial frame as error Rishikesh Donadkar
2026-01-06 11:15   ` Jai Luthra
2026-01-08  5:37     ` Rishikesh Donadkar
2026-01-15 12:39   ` Tomi Valkeinen
2025-12-30  8:32 ` [PATCH v9 17/19] media: cadence: csi2rx: Support runtime PM Rishikesh Donadkar
2026-01-14 17:04   ` Tomi Valkeinen
2025-12-30  8:32 ` [PATCH v9 18/19] media: ti: j721e-csi2rx: Support runtime suspend Rishikesh Donadkar
2026-01-15 12:46   ` Tomi Valkeinen
2026-01-19  6:04     ` Jai Luthra
2025-12-30  8:32 ` [PATCH v9 19/19] media: ti: j721e-csi2rx: Support system suspend using pm_notifier Rishikesh Donadkar
2026-01-15 12:50   ` Tomi Valkeinen
2026-01-19  5:25     ` Rishikesh Donadkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0380bf01-a4c8-4a98-b2e0-4fe5bace45ae@ti.com \
    --to=r-donadkar@ti.com \
    --cc=changhuang.liang@starfivetech.com \
    --cc=conor+dt@kernel.org \
    --cc=dan.carpenter@linaro.org \
    --cc=devarsht@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hverkuil+cisco@kernel.org \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jack.zhu@starfivetech.com \
    --cc=jai.luthra@ideasonboard.com \
    --cc=jai.luthra@linux.dev \
    --cc=krzk+dt@kernel.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=s-jain1@ti.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=sjoerd@collabora.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=vigneshr@ti.com \
    --cc=y-abhilashchandra@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®