Re: [PATCH v4 2/3] hwmon: (adt7475) temperature smoothing

[Guenter Roeck <linux@roeck-us.net>]

On 05/14/2017 06:30 PM, Chris Packham wrote:
> When enabled temperature smoothing allows ramping the fan speed over a
> configurable period of time instead of jumping to the new speed
> instantaneously.
>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>

Applied to -next.

> ---
> Changes in v2:
> - use a single tempN_smoothing attribute
> Changes in v3:
> - change enh_acou to enh_acoustics
> - simplify show_temp_st()
> Changes in v4:
> - removed dead code.
> - Make the order of the smoothing attributes match the other temperature
>   attributes.
>
> Guenter,
>
> We'd previously discussed making the smoothing values set CONFIG6[SLOW] to
> expose the other set of potential values. I wasn't sure where you wanted to go
> on that one.
>
> Personally I was on the fence since the difference would only be noticeable for
> the higher values. If we do want to add support for the other values it could
> be done as a subsequent patch (or a v5 if you want it).
>
It can be added later if anyone cares.

Thanks,
Guenter

>  Documentation/hwmon/adt7475 |  4 ++
>  drivers/hwmon/adt7475.c     | 91 +++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 95 insertions(+)
>
> diff --git a/Documentation/hwmon/adt7475 b/Documentation/hwmon/adt7475
> index dc0b55794c47..09d73a10644c 100644
> --- a/Documentation/hwmon/adt7475
> +++ b/Documentation/hwmon/adt7475
> @@ -114,6 +114,10 @@ minimum (i.e. auto_point1_pwm). This behaviour can be configured using the
>  pwm[1-*]_stall_disable sysfs attribute. A value of 0 means the fans will shut
>  off. A value of 1 means the fans will run at auto_point1_pwm.
>
> +The responsiveness of the ADT747x to temperature changes can be configured.
> +This allows smoothing of the fan speed transition. To set the transition time
> +set the value in ms in the temp[1-*]_smoothing sysfs attribute.
> +
>  Notes
>  -----
>
> diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c
> index 3eb8c5c2f8af..3056076fae27 100644
> --- a/drivers/hwmon/adt7475.c
> +++ b/drivers/hwmon/adt7475.c
> @@ -526,6 +526,88 @@ static ssize_t set_temp(struct device *dev, struct device_attribute *attr,
>  	return count;
>  }
>
> +/* Assuming CONFIG6[SLOW] is 0 */
> +static const int ad7475_st_map[] = {
> +	37500, 18800, 12500, 7500, 4700, 3100, 1600, 800,
> +};
> +
> +static ssize_t show_temp_st(struct device *dev, struct device_attribute *attr,
> +				  char *buf)
> +{
> +	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct adt7475_data *data = i2c_get_clientdata(client);
> +	long val;
> +
> +	switch (sattr->index) {
> +	case 0:
> +		val = data->enh_acoustics[0] & 0xf;
> +		break;
> +	case 1:
> +		val = (data->enh_acoustics[1] >> 4) & 0xf;
> +		break;
> +	case 2:
> +	default:
> +		val = data->enh_acoustics[1] & 0xf;
> +		break;
> +	}
> +
> +	if (val & 0x8)
> +		return sprintf(buf, "%d\n", ad7475_st_map[val & 0x7]);
> +	else
> +		return sprintf(buf, "0\n");
> +}
> +
> +static ssize_t set_temp_st(struct device *dev, struct device_attribute *attr,
> +				 const char *buf, size_t count)
> +{
> +	struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
> +	struct i2c_client *client = to_i2c_client(dev);
> +	struct adt7475_data *data = i2c_get_clientdata(client);
> +	unsigned char reg;
> +	int shift, idx;
> +	ulong val;
> +
> +	if (kstrtoul(buf, 10, &val))
> +		return -EINVAL;
> +
> +	switch (sattr->index) {
> +	case 0:
> +		reg = REG_ENHANCE_ACOUSTICS1;
> +		shift = 0;
> +		idx = 0;
> +		break;
> +	case 1:
> +		reg = REG_ENHANCE_ACOUSTICS2;
> +		shift = 0;
> +		idx = 1;
> +		break;
> +	case 2:
> +	default:
> +		reg = REG_ENHANCE_ACOUSTICS2;
> +		shift = 4;
> +		idx = 1;
> +		break;
> +	}
> +
> +	if (val > 0) {
> +		val = find_closest_descending(val, ad7475_st_map,
> +					      ARRAY_SIZE(ad7475_st_map));
> +		val |= 0x8;
> +	}
> +
> +	mutex_lock(&data->lock);
> +
> +	data->enh_acoustics[idx] &= ~(0xf << shift);
> +	data->enh_acoustics[idx] |= (val << shift);
> +
> +	i2c_smbus_write_byte_data(client, reg, data->enh_acoustics[idx]);
> +
> +	mutex_unlock(&data->lock);
> +
> +	return count;
> +}
> +
>  /*
>   * Table of autorange values - the user will write the value in millidegrees,
>   * and we'll convert it
> @@ -1008,6 +1090,8 @@ static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>  			    THERM, 0);
>  static SENSOR_DEVICE_ATTR_2(temp1_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>  			    set_temp, HYSTERSIS, 0);
> +static SENSOR_DEVICE_ATTR_2(temp1_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
> +			    set_temp_st, 0, 0);
>  static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, INPUT, 1);
>  static SENSOR_DEVICE_ATTR_2(temp2_alarm, S_IRUGO, show_temp, NULL, ALARM, 1);
>  static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp, set_temp,
> @@ -1024,6 +1108,8 @@ static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>  			    THERM, 1);
>  static SENSOR_DEVICE_ATTR_2(temp2_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>  			    set_temp, HYSTERSIS, 1);
> +static SENSOR_DEVICE_ATTR_2(temp2_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
> +			    set_temp_st, 0, 1);
>  static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, INPUT, 2);
>  static SENSOR_DEVICE_ATTR_2(temp3_alarm, S_IRUGO, show_temp, NULL, ALARM, 2);
>  static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_temp, NULL, FAULT, 2);
> @@ -1041,6 +1127,8 @@ static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp, set_temp,
>  			    THERM, 2);
>  static SENSOR_DEVICE_ATTR_2(temp3_crit_hyst, S_IRUGO | S_IWUSR, show_temp,
>  			    set_temp, HYSTERSIS, 2);
> +static SENSOR_DEVICE_ATTR_2(temp3_smoothing, S_IRUGO | S_IWUSR, show_temp_st,
> +			    set_temp_st, 0, 2);
>  static SENSOR_DEVICE_ATTR_2(fan1_input, S_IRUGO, show_tach, NULL, INPUT, 0);
>  static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_tach, set_tach,
>  			    MIN, 0);
> @@ -1125,6 +1213,7 @@ static struct attribute *adt7475_attrs[] = {
>  	&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
>  	&sensor_dev_attr_temp1_crit.dev_attr.attr,
>  	&sensor_dev_attr_temp1_crit_hyst.dev_attr.attr,
> +	&sensor_dev_attr_temp1_smoothing.dev_attr.attr,
>  	&sensor_dev_attr_temp2_input.dev_attr.attr,
>  	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
>  	&sensor_dev_attr_temp2_max.dev_attr.attr,
> @@ -1134,6 +1223,7 @@ static struct attribute *adt7475_attrs[] = {
>  	&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
>  	&sensor_dev_attr_temp2_crit.dev_attr.attr,
>  	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
> +	&sensor_dev_attr_temp2_smoothing.dev_attr.attr,
>  	&sensor_dev_attr_temp3_input.dev_attr.attr,
>  	&sensor_dev_attr_temp3_fault.dev_attr.attr,
>  	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
> @@ -1144,6 +1234,7 @@ static struct attribute *adt7475_attrs[] = {
>  	&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
>  	&sensor_dev_attr_temp3_crit.dev_attr.attr,
>  	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
> +	&sensor_dev_attr_temp3_smoothing.dev_attr.attr,
>  	&sensor_dev_attr_fan1_input.dev_attr.attr,
>  	&sensor_dev_attr_fan1_min.dev_attr.attr,
>  	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
>