From: Sebastian Gottschall <s.gottschall@dd-wrt.com>
To: Willy Tarreau <w@1wt.eu>
Cc: Harsh Shandilya <msfjarvis@gmail.com>,
linux-kernel@vger.kernel.org, stable@vger.kernel.org
Subject: Re: Linux 3.10.108 (EOL)
Date: Wed, 15 Nov 2017 09:09:34 +0100 [thread overview]
Message-ID: <03a3f3bc-eb2a-ab83-1016-a45ed9169648@dd-wrt.com> (raw)
In-Reply-To: <20171115043202.GA4315@1wt.eu>
Am 15.11.2017 um 05:32 schrieb Willy Tarreau:
> On Tue, Nov 14, 2017 at 11:40:31PM +0100, Sebastian Gottschall wrote:
>>> And anyway the end of life has been indicated on kernel.org for 18 months
>>> and in every announce in 2017, so it cannot be a surprize anymore :-) At
>>> least nobody seemed to complain for all this time!
>> itsn no surprise for sure, but that also means i have to stay on the old
>> kernel for these special devices and your argument about disable certain
>> parts which simply turned bigger over time is no option
>>
>> since it would remove features which existed before. its not that i enable
>> all features of the kernel. i use every kernel with the same options (some
>> are adjusted since they are renamed or moved)
> Then I have a few questions :
> - how did you choose this kernel ? Or did you choose the hardware based
> on the kernel size ?
i did not choose it. i port regular all kernels to the platforms i use
including 4.4 and 4.9
but a few of these which are already ported to 4.4 and 4.9 will still
run 3.10 for resource problems.
> - what would have you done if 3.10 had not been LTS ?
using another LTS at that point :-)
> - have you at least tried other kernels before claiming they are much
> larger ? Following your principle, 3.2 should be smaller and 3.16 not
> much larger. The former offers you about 6 extra months of maintenance,
> the latter 3.5 years (https://www.kernel.org/category/releases.html).
i also used 3.2 before. sure
dont get me wrong i work with all kernels, also with latests. i do also
not complain that 3.10 is now EOL
i just wanted to throw some stones on the bloated kernel problem which
is increasing
>
>> but even then the kernel is turning into a ram and space eating monster if i
>> look on devices with 16 mb ram and 4 mb flash. this is mainly for
>> maintaining older hardware with latest updates.
> So why didn't you ask if it was possible to pursue the maintenance a bit a
> long time ago ? LTS maintenance is a collective effort and is done based on
> usage. If enough people have good reasons for going further it can be enough
> a justification to push the deadline. Now it's too late.
didnt know that. the LTS deadline was defined a long time ago. i follow
up the mailing lists mainly for reviewing patches
and reporting feedback if required. if it see such a discussion i may
get in touch with it too, but with hundrets of emails every days here
its hard to follow anything
>> the more recent hardware is getting better here
>>
>> you dont seem to know how it is to work on wireless routers :-)
> Yes I do, I've been distributing a full blown load balancer distro on a
> 10 MB image (running on 3.10 as well). But I also know that sometimes
> you make some nice space savings on new kernels (xz/zstd compression,
> ability to remove certain useless stuff in these environments such as
> FS ACLs or mandatory locks, etc). Sure, upgrading to a new kernel on
> existing hardware is always a challenge. But it's also an interesting
> one.
i do use xz and i do use a modified squashfs which is even smaller than
the xz one in the kernel
smallest router i run with linux has 8 mb ram and 2 mb flash. so i do
know how to get all very small. 10 mb image is no issue for me. the 4 mb
flashes devices are my problem.
>
> Also just to give you an idea, I've just compared the size of these
> kernels configured with "make allnoconfig" (and I verified that all
> of them were compressed using gzip) :
>
> 3.10.108 : 875 kB
> 4.4.97 : 522 kB
> 4.9.61 : 561 kB
> 4.14 : 566 kB
its a little bit unrealistic since you have to count in network
subsystem, filesystem and drivers.
standard kernel with xz compression is about 800 - 900 kb for me in 3.10
and 4.4 / 4.9 etc. is often more than 1 - 1.2 mb
sometimes just the 100 kb more count in and turn into a problem since i
have to remove something from the image to get it fitting
if you are really interested i can give you a real comparisation using a
comparable config on 3.10, 4.4 and 4.9 for a standard mips target
>
> So the argument that migrating away from 3.10 is hard due to the size
> doesn't stand much here :-)
its turning harder. i already ported 4.4 and 4.9 as i said. so i tried
already if they are running or not. they do run, but they are bigger and
do not fit for some targets
>
> Willy
>
--
Mit freundlichen Grüssen / Regards
Sebastian Gottschall / CTO
NewMedia-NET GmbH - DD-WRT
Firmensitz: Stubenwaldallee 21a, 64625 Bensheim
Registergericht: Amtsgericht Darmstadt, HRB 25473
Geschäftsführer: Peter Steinhäuser, Christian Scheele
http://www.dd-wrt.com
email: s.gottschall@dd-wrt.com
Tel.: +496251-582650 / Fax: +496251-5826565
next prev parent reply other threads:[~2017-11-15 8:09 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-04 23:06 Willy Tarreau
[not found] ` <CALpmF+EbmuxvNWiBccGgtw=xDEW1=2hvxfVNp_r4dfiSF2o1UQ@mail.gmail.com>
2017-11-05 7:05 ` Willy Tarreau
2017-11-05 7:46 ` Willy Tarreau
2017-11-14 22:00 ` Sebastian Gottschall
2017-11-14 22:18 ` Willy Tarreau
2017-11-14 22:40 ` Sebastian Gottschall
2017-11-15 4:32 ` Willy Tarreau
2017-11-15 8:09 ` Sebastian Gottschall [this message]
2017-11-15 8:50 ` Greg KH
2017-11-17 23:46 ` Alan Cox
2017-11-18 7:31 ` Willy Tarreau
2017-11-20 15:46 ` Alan Cox
2017-11-18 7:37 ` Sebastian Gottschall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=03a3f3bc-eb2a-ab83-1016-a45ed9169648@dd-wrt.com \
--to=s.gottschall@dd-wrt.com \
--cc=linux-kernel@vger.kernel.org \
--cc=msfjarvis@gmail.com \
--cc=stable@vger.kernel.org \
--cc=w@1wt.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®