Re: [PATCH v5] ALSA: hda/tas2781: Add speaker id check for ASUS projects

[Christophe JAILLET <christophe.jaillet@wanadoo.fr>]

Le 16/11/2024 à 08:50, Baojun Xu a écrit :
> Add speaker id check by gpio in ACPI for ASUS projects.
> In other vendors, speaker id was checked by BIOS, and was applied in
> last bit of subsys id, so we can load corresponding firmware binary file
> for its speaker by subsys id.
> But in ASUS project, the firmware binary name will be appended an extra
> number to tell the speakers from different vendors. And this single digit
> come from gpio level of speaker id in BIOS.
> 
> Signed-off-by: Baojun Xu <baojun.xu@ti.com>

...

> +	sub = acpi_get_subsystem_id(ACPI_HANDLE(physdev));
> +	if (IS_ERR(sub)) {
> +		dev_err(p->dev, "Failed to get SUBSYS ID.\n");
> +		goto err;
> +	}
> +	// Speaker id was needed for ASUS projects.

Comments in this file are all /* */.
Why introduce // in many places?

CJ

> +	if (!strncmp(sub, TAS2781_ASUS_ID, strlen(TAS2781_ASUS_ID))) {
> +		ret = devm_acpi_dev_add_driver_gpios(p->dev,
> +			tas2781_speaker_id_gpios);
> +		if (ret < 0)
> +			dev_err(p->dev, "Failed to add driver gpio %d.\n",
> +			ret);

ret should be indented below the ( to ease reading.

> +		p->speaker_id = devm_gpiod_get(p->dev, "speakerid", GPIOD_IN);
> +		if (IS_ERR(p->speaker_id)) {
> +			dev_err(p->dev, "Failed to get Speaker id.\n");
> +			ret = PTR_ERR(p->speaker_id);
> +			goto err;
> +		}
> +	} else {
> +		p->speaker_id = NULL;
> +	}

...