mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
To: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>,
	Bjorn Andersson <andersson@kernel.org>,
	Bartosz Golaszewski <brgl@kernel.org>,
	Linus Walleij <linusw@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Srinivas Kandagatla <srini@kernel.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
	linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-sound@vger.kernel.org
Subject: Re: [PATCH v2 3/5] ASoC: qcom: q6prm: add support for LPASS LPR resource voting
Date: Tue, 14 Jul 2026 08:43:10 +0100	[thread overview]
Message-ID: <046bb977-dad6-4bd0-b1c2-4321c58d3f27@oss.qualcomm.com> (raw)
In-Reply-To: <20260713184549.929569-4-prasad.kumpatla@oss.qualcomm.com>

On 7/13/26 7:45 PM, Prasad Kumpatla wrote:
> Add support for issuing LPASS low-power resource (LPR) votes through
> the PRM interface.
> 
> Some platforms (e.g. Hawi) require the LPASS to be kept active via LPR
> resource voting instead of the existing hardware core vote mechanism.
> Handle this by introducing support for PARAM_ID_RSC_CPU_LPR when the
> LPR vote clock ID is requested.
> 
> For LPR requests, use the appropriate parameter ID and payload format
> to disable CPU subsystem sleep, ensuring that the LPASS register space
> remains accessible.
> 
> Also add the corresponding clock mapping for LPASS_HW_LPR_VOTE and make
> the q6dsp clock ID range consistent with the dt-bindings by deriving
> it from Q6AFE_MAX_CLK_ID.
> 
> Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
> ---
>  sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c |  2 +-
>  sound/soc/qcom/qdsp6/q6prm-clocks.c       |  2 ++
>  sound/soc/qcom/qdsp6/q6prm.c              | 17 +++++++++++++----
>  sound/soc/qcom/qdsp6/q6prm.h              |  1 +
>  4 files changed, 17 insertions(+), 5 deletions(-)
> 
> diff --git a/sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c b/sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c
> index 03838582a..79527a367 100644
> --- a/sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c
> +++ b/sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c
> @@ -12,7 +12,7 @@
>  #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
>  #include "q6dsp-lpass-clocks.h"
>  
> -#define Q6DSP_MAX_CLK_ID			104
> +#define Q6DSP_MAX_CLK_ID			Q6AFE_MAX_CLK_ID
>  #define Q6DSP_LPASS_CLK_ROOT_DEFAULT		0
>  
>  
> diff --git a/sound/soc/qcom/qdsp6/q6prm-clocks.c b/sound/soc/qcom/qdsp6/q6prm-clocks.c
> index 4c574b48a..2b2b3872e 100644
> --- a/sound/soc/qcom/qdsp6/q6prm-clocks.c
> +++ b/sound/soc/qcom/qdsp6/q6prm-clocks.c
> @@ -63,6 +63,8 @@ static const struct q6dsp_clk_init q6prm_clks[] = {
>  		       "LPASS_HW_MACRO"),
>  	Q6DSP_VOTE_CLK(LPASS_HW_DCODEC_VOTE, Q6PRM_HW_CORE_ID_DCODEC,
>  		       "LPASS_HW_DCODEC"),
> +	Q6DSP_VOTE_CLK(LPASS_HW_LPR_VOTE, Q6PRM_HW_LPR_VOTE,
> +		       "LPASS_HW_LPR_VOTE"),
>  };
>  
>  static const struct q6dsp_clk_desc q6dsp_clk_q6prm __maybe_unused = {
> diff --git a/sound/soc/qcom/qdsp6/q6prm.c b/sound/soc/qcom/qdsp6/q6prm.c
> index 04892fb44..7a7a1d3d5 100644
> --- a/sound/soc/qcom/qdsp6/q6prm.c
> +++ b/sound/soc/qcom/qdsp6/q6prm.c
> @@ -31,10 +31,16 @@ struct q6prm {
>  #define PARAM_ID_RSC_HW_CORE		0x08001032
>  #define PARAM_ID_RSC_LPASS_CORE		0x0800102B
>  #define PARAM_ID_RSC_AUDIO_HW_CLK	0x0800102C
> +#define PARAM_ID_RSC_CPU_LPR		0x08001A6E
> +
> +#define LPR_CPU_SS_SLEEP_DISABLED	0x1
>  
>  struct prm_cmd_request_hw_core {
>  	struct apm_module_param_data param_data;
> -	uint32_t hw_clk_id;
> +	union {
> +		u32 hw_clk_id;
> +		u32 lpr_state;
> +	};
>  } __packed;
>  
>  struct prm_cmd_request_rsc {
> @@ -62,6 +68,7 @@ static int q6prm_set_hw_core_req(struct device *dev, uint32_t hw_block_id, bool
>  	struct prm_cmd_request_hw_core *req;
>  	gpr_device_t *gdev = prm->gdev;
>  	uint32_t opcode, rsp_opcode;
> +	bool lpr_req = (hw_block_id == Q6PRM_HW_LPR_VOTE);
>  
>  	if (enable) {
>  		opcode = PRM_CMD_REQUEST_HW_RSC;
> @@ -82,10 +89,13 @@ static int q6prm_set_hw_core_req(struct device *dev, uint32_t hw_block_id, bool
>  
>  	param_data->module_instance_id = GPR_PRM_MODULE_IID;
>  	param_data->error_code = 0;
> -	param_data->param_id = PARAM_ID_RSC_HW_CORE;
> +	param_data->param_id = lpr_req ? PARAM_ID_RSC_CPU_LPR : PARAM_ID_RSC_HW_CORE;
>  	param_data->param_size = sizeof(*req) - APM_MODULE_PARAM_DATA_SIZE;
>  
> -	req->hw_clk_id = hw_block_id;
> +	if (lpr_req)
> +		req->lpr_state = LPR_CPU_SS_SLEEP_DISABLED;

this does not make sense, this should be set based on enable flag, here
you are disabling the LPR for both enable and disable request.


> +	else
> +		req->hw_clk_id = hw_block_id;
>  
>  	return q6prm_send_cmd_sync(prm, pkt, rsp_opcode);
>  }
> @@ -94,7 +104,6 @@ int q6prm_vote_lpass_core_hw(struct device *dev, uint32_t hw_block_id,
>  			     const char *client_name, uint32_t *client_handle)
>  {
>  	return q6prm_set_hw_core_req(dev, hw_block_id, true);
> -
unnecessary change.

>  }
>  EXPORT_SYMBOL_GPL(q6prm_vote_lpass_core_hw);
>  
> diff --git a/sound/soc/qcom/qdsp6/q6prm.h b/sound/soc/qcom/qdsp6/q6prm.h
> index a988a3208..bd5ee0c40 100644
> --- a/sound/soc/qcom/qdsp6/q6prm.h
> +++ b/sound/soc/qcom/qdsp6/q6prm.h
> @@ -87,6 +87,7 @@
>  #define Q6PRM_LPASS_CLK_ROOT_DEFAULT	0
>  #define Q6PRM_HW_CORE_ID_LPASS		1
>  #define Q6PRM_HW_CORE_ID_DCODEC		2
> +#define Q6PRM_HW_LPR_VOTE		3
>  
>  int q6prm_set_lpass_clock(struct device *dev, int clk_id, int clk_attr,
>  			  int clk_root, unsigned int freq);


  reply	other threads:[~2026-07-14  7:43 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-13 18:45 [PATCH v2 0/5] ASoC: qcom and pinctrl: add LPASS LPR voting and Hawi LPASS LPI TLMM Prasad Kumpatla
2026-07-13 18:45 ` [PATCH v2 1/5] pinctrl: qcom: lpass-lpi: make mutex cleanup devm-managed Prasad Kumpatla
2026-07-15 12:32   ` Bartosz Golaszewski
2026-07-16  9:48   ` Konrad Dybcio
2026-07-13 18:45 ` [PATCH v2 2/5] ASoC: dt-bindings: qcom: add LPASS LPR vote clock ID Prasad Kumpatla
2026-07-13 18:45 ` [PATCH v2 3/5] ASoC: qcom: q6prm: add support for LPASS LPR resource voting Prasad Kumpatla
2026-07-14  7:43   ` Srinivas Kandagatla [this message]
2026-07-14  8:43     ` Prasad Kumpatla
2026-07-15  7:39       ` Srinivas Kandagatla
2026-07-13 18:45 ` [PATCH v2 4/5] dt-bindings: pinctrl: qcom,hawi-lpass-lpi-pinctrl: Add Hawi LPI pinctrl Prasad Kumpatla
2026-07-13 18:45 ` [PATCH v2 5/5] pinctrl: qcom: hawi-lpass-lpi: add Hawi LPASS LPI TLMM Prasad Kumpatla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=046bb977-dad6-4bd0-b1c2-4321c58d3f27@oss.qualcomm.com \
    --to=srinivas.kandagatla@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=brgl@kernel.org \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=krzk@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linusw@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=prasad.kumpatla@oss.qualcomm.com \
    --cc=robh@kernel.org \
    --cc=srini@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®