Re: SiS601?!

["Nelson Lee" <nelson@sis.com.tw>]

K.M.:

No, we do not have.
]
Best Regards,

Nelson Lee
/\/\/\/\/\/\/\/\/
Sr. Technical Marketing Manager
Integrated Product Division
Silicon Integrated Systems Corp.
6F, NO. 1, ALLEY 1, LANE 235,
BAO CHIAO RD. HSIN TIEN,
TAIPEI, TAIWAN, R.O.C.
TEL:886-2-29161619  ext:381
FAX:886-2-29161618
http://www.sis.com.tw
**************************

----- Original Message -----
From: "kmliu" <kmliu@sis.com.tw>
To: "nelson" <nelson@sis.com.tw>; <linux-kernel@vger.kernel.org>; "Krzysztof
Oledzki" <ole@ans.pl>
Cc: "ron" <ronchang@sis.com.tw>; "JasonTsai" <jstsai@sis.com.tw>; "charles"
<charles@sis.com.tw>; <andre@suse.com>
Sent: Friday, November 23, 2001 8:11 AM
Subject: SiS601?!


> Hi,
>
> We do not have any product which name is SiS601,
>
> The IDE controller is SiS5513, the north bridge is
SiS620/530/630/540/550/635/735/730/740/640/645/640.
>
> Please make sure what is the name of the chipset.
>
> Nelson:
>
> Do we have SiS601 in notebook market?
>
> Regards,
> K.M. Liu
>
> -----Original Message-----
> From: Krzysztof Oledzki [mailto:ole@ans.pl]
> Sent: Friday, November 23, 2001 4:53 AM
> To: linux-kernel@vger.kernel.org
> Cc: kmliu@sis.com.tw; andre@suse.com
> Subject: SIS IDE (sis5513.c)
>
>
> Hello :)
>
> I have a notebook with SIS IDE Chipset - SIS601. This week I have
> installed Linux. It seems that this chipset is not supported by sis5513.c
> driver. I tried adding support myself by putting PCI_DEVICE_ID_SI_601 in
> each switch/case in this file (because I found that it sound work for
> PCI_DEVICE_ID_SI_540 and PCI_DEVICE_ID_SI_620 ). Unfortunetly ugly
> "unknown IDE controller" message still appeard. Then I go to the ide-pci.c
> and noticed that int ide_pci_chipsets here is only one line for SIS:
>
>         {DEVID_SIS5513, "SIS5513",      PCI_SIS5513,    ATA66_SIS5513,
INIT_SIS5513,   NULL,        {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
ON_BOARD,       0 },
>
> and one #define:
> #define DEVID_SIS5513   ((ide_pci_devid_t){PCI_VENDOR_ID_SI,
PCI_DEVICE_ID_SI_5513})
>
> BTW: Am I right, this makes that only PCI_DEVICE_ID_SI_5513 chipset is
> supported and all other chipset listed in sis5513.c will not work?
>
> Ok, I added DEVID_SIS601 (PCI_DEVICE_ID_SI_601) with parameters from
> SIS5513 or all zeros but... now I have "neither IDE port enabled (BIOS)"
> message. So? Is there any way to enable DMA transfers for my HDD? With PIO
> my HDD is verry slow (hdparm shows 3 MB/sek).
>
> Best regards,
>
> Krzysztof Oledzki
>