From: David Lechner <dlechner@baylibre.com>
To: Jonathan Cameron <jic23@kernel.org>
Cc: "Michael Hennerich" <Michael.Hennerich@analog.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] iio: adc: ad7124: fix sample rate for multi-channel use
Date: Mon, 8 Sep 2025 10:17:06 -0500 [thread overview]
Message-ID: <0505896b-02b5-465e-adc4-4404d8e657c1@baylibre.com> (raw)
In-Reply-To: <20250907110013.266c2da2@jic23-huawei>
On 9/7/25 5:00 AM, Jonathan Cameron wrote:
> On Fri, 05 Sep 2025 12:33:34 -0500
> David Lechner <dlechner@baylibre.com> wrote:
>
...
> Given you replied to Andy's indentation comment on v2 and that seemed
> reasonable to me + the other change is a simplification for now I think
> this is ready to go.
>
> Given the whole ABI / fixes tag point I'm going to apply it to the
> 'slow' path and taking via testing/togreg for the next merge windows.
>
> Applied to togreg and pushed out as testing for 0-day to take a look.
With fresh eyes, I spotted a few minor mistakes...
>> diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c
>> index c6435327d431e5f4ba28aa3332ec6eb90da7c83d..70f458e3ccc12db884dda9003abcffdf48989e5e 100644
>> --- a/drivers/iio/adc/ad7124.c
>> +++ b/drivers/iio/adc/ad7124.c
>> @@ -93,10 +93,13 @@
>> #define AD7124_CONFIG_PGA GENMASK(2, 0)
>>
>> /* AD7124_FILTER_X */
>> -#define AD7124_FILTER_FS GENMASK(10, 0)
>> #define AD7124_FILTER_FILTER GENMASK(23, 21)
>> #define AD7124_FILTER_FILTER_SINC4 0
>> #define AD7124_FILTER_FILTER_SINC3 2
>> +#define AD7124_FILTER_FILTER_SINC4_SINC1 4
>> +#define AD7124_FILTER_FILTER_SINC3_SINC1 5
Adding these two lines should be deferred to a later patch.
>> +#define AD7124_FILTER_SINGLE_CYCLE BIT(16)
>> +#define AD7124_FILTER_FS GENMASK(10, 0)
>>
>> #define AD7124_MAX_CONFIGS 8
>> #define AD7124_MAX_CHANNELS 16
>> @@ -285,18 +288,20 @@ static u32 ad7124_get_fclk_hz(struct ad7124_state *st)
>>
>> static void ad7124_set_channel_odr(struct ad7124_state *st, unsigned int channel, unsigned int odr)
>> {
>> - unsigned int fclk, odr_sel_bits;
>> + unsigned int fclk, factor, odr_sel_bits;
>>
>> fclk = ad7124_get_fclk_hz(st);
>>
>> /*
>> - * FS[10:0] = fCLK / (fADC x 32) where:
>> + * FS[10:0] = fCLK / (fADC x 32 * N) where:
>> * fADC is the output data rate
>> * fCLK is the master clock frequency
>> + * N is number of conversions per sample (depends of filter type)
typo: s/depends of/depends on/
>> * FS[10:0] are the bits in the filter register
>> * FS[10:0] can have a value from 1 to 2047
>> */
next prev parent reply other threads:[~2025-09-08 15:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-05 17:33 David Lechner
2025-09-07 10:00 ` Jonathan Cameron
2025-09-08 15:17 ` David Lechner [this message]
2025-09-10 16:27 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0505896b-02b5-465e-adc4-4404d8e657c1@baylibre.com \
--to=dlechner@baylibre.com \
--cc=Michael.Hennerich@analog.com \
--cc=andy@kernel.org \
--cc=jic23@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®