From: Mesih Kilinc <mesihkilinc@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org, linux-sunxi@googlegroups.com
Cc: Mesih Kilinc <mesihkilinc@gmail.com>,
Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>,
Russell King <linux@armlinux.org.uk>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Marc Zyngier <marc.zyngier@arm.com>,
Linus Walleij <linus.walleij@linaro.org>,
Icenowy Zheng <icenowy@aosc.io>, Rob Herring <robh+dt@kernel.org>,
Julian Calaby <julian.calaby@gmail.com>
Subject: [RFC PATCH v3 17/17] ARM: suniv: f1c100s: add device tree for Lichee Pi Nano
Date: Wed, 21 Nov 2018 21:30:50 +0300 [thread overview]
Message-ID: <055b2e09b14ff1699f2ed8fc879a6e9cfa9c5270.1542824904.git.mesihkilinc@gmail.com> (raw)
In-Reply-To: <cover.1542824904.git.mesihkilinc@gmail.com>
Lichee Pi Nano is a F1C100s board by Lichee Pi.
Add initial device tree for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
---
arch/arm/boot/dts/Makefile | 2 ++
arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 26 +++++++++++++++++++++++
2 files changed, 28 insertions(+)
create mode 100644 arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b0e966d..2b96a5b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1066,6 +1066,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb \
sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+ suniv-f1c100s-licheepi-nano.dtb
dtb-$(CONFIG_ARCH_TANGO) += \
tango4-vantage-1172.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
new file mode 100644
index 0000000..6ae5ccc
--- /dev/null
+++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * Copyright 2018 Icenowy Zheng <icenowy@aosc.io>
+ */
+
+/dts-v1/;
+#include "suniv-f1c100s.dtsi"
+
+/ {
+ model = "Lichee Pi Nano";
+ compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
--
2.7.4
prev parent reply other threads:[~2018-11-21 18:32 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-21 18:30 [RFC PATCH v3 00/17] initial support for "suniv" Allwinner new ARM9 SoC Mesih Kilinc
2018-11-21 18:30 ` [RFC PATCH v3 01/17] ARM: add CONFIG_ARCH_SUNXI_V7 for differentiate ARMv5/v7 Allwinner SoCs Mesih Kilinc
2018-11-22 8:26 ` Maxime Ripard
2018-11-22 15:07 ` Mesih Kilinc
2018-11-22 15:57 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 02/17] dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC Mesih Kilinc
2018-11-22 8:26 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 03/17] ARM: sunxi: add Allwinner ARMv5 SoCs Mesih Kilinc
2018-11-22 8:27 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 04/17] dt-bindings: interrupt-controller: Add suniv interrupt-controller Mesih Kilinc
2018-11-22 8:27 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 05/17] irqchip/sun4i: add support for suniv interrupt controller Mesih Kilinc
2018-11-22 8:35 ` Maxime Ripard
2018-11-22 15:02 ` Mesih Kilinc
2018-11-22 15:59 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 06/17] dt-bindings: timer: Add Allwinner suniv timer Mesih Kilinc
2018-11-22 8:35 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 07/17] clocksource: sun4i: add a compatible for suniv Mesih Kilinc
2018-11-22 8:36 ` Maxime Ripard
2018-11-22 13:23 ` Daniel Lezcano
2018-11-21 18:30 ` [RFC PATCH v3 08/17] dt-bindings: pinctrl: Add Allwinner suniv F1C100s pinctrl Mesih Kilinc
2018-11-22 8:36 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 09/17] pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs) Mesih Kilinc
2018-11-22 8:36 ` Maxime Ripard
2018-11-22 8:45 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 10/17] dt-bindings: clock: Add Allwinner suniv F1C100s CCU Mesih Kilinc
2018-11-22 8:37 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 11/17] clk: sunxi-ng: add support for suniv F1C100s SoC Mesih Kilinc
2018-11-22 8:38 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 12/17] dt-bindings: sram: Add Allwinner suniv F1C100s Mesih Kilinc
2018-11-22 8:39 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 13/17] SoC: sunxi: Add support for Allwinner ARMv5 F1C100s sram Mesih Kilinc
2018-11-22 8:39 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 14/17] dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt Mesih Kilinc
2018-11-22 8:39 ` Maxime Ripard
2018-11-21 18:30 ` [RFC PATCH v3 15/17] watchdog: Add support for " Mesih Kilinc
2018-11-21 18:30 ` [RFC PATCH v3 16/17] ARM: dts: suniv: add initial DTSI file for F1C100s Mesih Kilinc
2018-11-22 8:43 ` Maxime Ripard
2018-11-21 18:30 ` Mesih Kilinc [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=055b2e09b14ff1699f2ed8fc879a6e9cfa9c5270.1542824904.git.mesihkilinc@gmail.com \
--to=mesihkilinc@gmail.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=icenowy@aosc.io \
--cc=julian.calaby@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=linux@armlinux.org.uk \
--cc=marc.zyngier@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®