From: Hubert Tonneau <hubert.tonneau@fullpliant.org>
To: linux-kernel@vger.kernel.org
Subject: MPT fusion driver, better but still buggy at errors handling under 2.6
Date: Tue, 11 Oct 2005 23:58:15 GMT [thread overview]
Message-ID: <05ELX94@briare1.heliogroup.fr> (raw)
MPT fusion driver under Linux 2.6 still fails to recover properly from tiny
SCSI troubles through doing reset then resend pending commands just like
any good Linux SCSI driver does transparently.
Here is the behaviour of MPT fusion driver I noticed on various Linux kernels:
2.4.xx recovers gracefully (only reading the kernel log will enable
to discover that a tiny problem did append).
2.6.xx xx <= 11, enters an infinit loop attempting to reset the SCSI
so the box gets unusable and requires a rough power cycle to recover.
2.6.12 untested.
2.6.13 puts the disk offline, so the box continues to run, but Linux
software RAID removed the disk. A software reboot is required
to get the disk back online, and a 'raidhotadd' will also be to get
the all service back online, also this is a remote server, and the
box did not came up after the remote sofware reboot request :-(
I reported this bug about Linux 2.6.5 on Fri, 23 Apr 2004,
about Linux 2.6.9 on Wed, 26 Jan 2005,
and the bug is still there.
Here is the 2.6.13 kernel console:
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1adb00)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1adb00)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad980)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad980)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad800)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad800)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad680)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad680)
<6>mptbase: ioc0: IOCStatus(0x0048): SCSI Task Terminated
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad500)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad500)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad380)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad380)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad200)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad200)
<6>mptbase: ioc0: IOCStatus(0x0048): SCSI Task Terminated
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad080)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=da1ad080)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=f39ebe00)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=f39ebe00)
<6>mptbase: ioc0: IOCStatus(0x0048): SCSI Task Terminated
<4>mptscsih: ioc0: >> Attempting task abort! (sc=f39ebc80)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=f39ebc80)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=f39ebb00)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=f39ebb00)
<6>mptbase: ioc0: IOCStatus(0x0048): SCSI Task Terminated
<4>mptscsih: ioc0: >> Attempting task abort! (sc=f39eb980)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting task abort! (sc=f39eb980)
<6>mptbase: ioc0: IOCStatus(0x004a): SCSI Task Management Failed
<4>mptscsih: ioc0: >> Attempting target reset! (sc=da1adb00)
<6>mptbase: Initiating ioc0 recovery
<6>mptbase: ioc0: IOCStatus(0x0047): SCSI Protocol Error
<4>mptscsih: ioc0: >> Attempting target reset! (sc=da1ad500)
<4>mptscsih: ioc0: >> Attempting bus reset! (sc=da1adb00)
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<4>mptscsih: ioc0: >> Attempting host reset! (sc=da1adb00)
<6>mptbase: Initiating ioc0 recovery
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<6>mptbase: ioc0: IOCStatus(0x0043): SCSI Device Not There
<6>scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
<6>scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
<6>scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
<6>scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
<6>scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
<6>scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
<3>scsi0 (0:0): rejecting I/O to offline device
<1>raid1: Disk failure on sda1, disabling device.
<4> Operation continuing on 1 devices
<3>scsi0 (0:0): rejecting I/O to offline device
<3>scsi0 (0:0): rejecting I/O to offline device
<3>scsi0 (0:0): rejecting I/O to offline device
<3>scsi0 (0:0): rejecting I/O to offline device
<3>scsi0 (0:0): rejecting I/O to offline device
<4>RAID1 conf printout:
<4> --- wd:1 rd:2
<4> disk 0, wo:1, o:0, dev:sda1
<4> disk 1, wo:0, o:1, dev:sdb1
<4>RAID1 conf printout:
<4> --- wd:1 rd:2
<4> disk 1, wo:0, o:1, dev:sdb1
and after an attempt to futher read the disk without rebooting:
<3>scsi0 (0:0): rejecting I/O to offline device
<3>Buffer I/O error on device sda1, logical block 17649664
<3>Buffer I/O error on device sda1, logical block 17649665
<3>Buffer I/O error on device sda1, logical block 17649666
<3>Buffer I/O error on device sda1, logical block 17649667
<3>Buffer I/O error on device sda1, logical block 17649668
<3>scsi0 (0:0): rejecting I/O to offline device
next reply other threads:[~2005-10-12 0:02 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-11 23:58 Hubert Tonneau [this message]
2005-10-12 6:22 Hubert Tonneau
2005-10-12 17:30 Hubert Tonneau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=05ELX94@briare1.heliogroup.fr \
--to=hubert.tonneau@fullpliant.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®